Sandy Eggo Designs Corvette Parts and Accessories

C7 Corvette Panoramic Blind Spot Mirror

C7 Corvette Blind Spot Mirror. The Seventh Generation Corvette is one of the premier sports cars of our times. The power and performance of the C7 is ranked among the best in the world. The most common complaint of the C7 generation is that it has a huge blind spot on the drivers and passenger side. This makes it hard to see other cars and motorcycles as they approach side of the vehicle. Setting your mirrors correctly is an important first step, but regardless of position, a flat mirror's field of view is limited and can only give you one angle at a time. Improve your vision with the new C7 Corvette Blind Spot Mirror. 

The C7 Corvette Panoramic Blind Spot Mirror addresses those issues by giving you a larger field of vision while keeping the OEM Factory Mirror shape and size. Gone are the days of the ugly stick on convex mirrors. This C7 Corvette Blind Spot Mirror utilizes an embedded silver reflective surface inside high quality glass to give you the very best optical quality possible. The C7 Corvette Blind Spot mirror mounts directly to your existing glass using a very strong 3M VBH Tape that has a extremely high adhesion rate and will resist most solvents and cleaners. Installation is simple, simply remove the Panoramic Blind Spot Mirror from it packing, clean your existing mirror, and stick it on. It is so thin, that you will not even know that it was installed. SED-C7-200-00 / SED-C7-201

Fitment:  2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray, Grand Sport, Z06 and ZR1

Product Notice: This product is intended for OFF ROAD USE ONLY. Use of this product on public streets may violate federal and or state regulations. Buyer accepts all responsibility and liability when purchasing and using this product. 

C6 Corvette Panoramic Blind Spot Mirror

C6 Corvette Blind Spot Mirror. The 6th Generation Corvette is one of the premier sports cars of our times. The performance of the C6 has been ranked among the best in the world. The most common complaint of the C6 generation is that it has a large blind spot on the drivers side. This makes it hard to see other cars and motorcycles as they approach you on the drivers side of the vehicle. Setting your mirrors correctly is an important first step, but regardless of position, a flat mirror's field of view is limited and can only give you one angle at a time. Improve your vision with the new Drivers Side C6 Corvette Blind Spot Mirror. 

The C6 Corvette Panoramic Blind Spot Mirror addresses those issues by giving you a larger field of vision while keeping the OEM Factory Mirror shape and size. Gone are the days of the ugly stick on convex mirrors. This C6 Corvette Blind Spot Mirror utilizes an embedded silver reflective surface inside high quality glass to give you the very best optical quality possible. The C6 Corvette Blind Spot mirror mounts directly to your existing glass using a very strong 3M VBH Tape that has a extremely high adhesion rate and will resist most solvents and cleaners. Installation is simple, simply remove the Panoramic Blind Spot Mirror from it packing, clean your existing mirror, and stick it on. It is so thin, that you will not even know that it was installed. Will fit Base, Coupe, Convertible, Grand Sport, Z06 and ZR1. SED-C6-200-00

Fitment:  2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Base, Grand Sport, Z06, ZR1, Coupe and Convertible Models

Product Notice: This product is intended for OFF ROAD USE ONLY. Use of this product on public streets may violate federal and or state regulations. Buyer accepts all responsibility and liability when purchasing and using this product. 

C8 Corvette Seat Belt Stay

Sandy Eggo Designs Seat Belt Stay - C8 Corvette. New and Improved. As many C8 owners know, there's an opening on the top of the seat belt guides that allows your seat belt to slip in and out of the guide. This is a problem because when out of the guide, the seatbelt can rub against the seat material, may not be in the optimal shoulder/chest position and seat belt may be harder to locate. The V2 design clips into place with positive latch seating and now features a smooth ABS plastic surface that minimizes friction and insures easy movement of the seat belt. Sold as a pair (2).

The C8 Stingray Seatbelt Stay simply slips over the top of the guide to bridge the opening.

"A Simple Solution To A Simple Problem"

Fitment: C8 Corvette Stingray 2020, 2021, 2022, 2023, 2024

C7 Corvette Bin Buddy

Bin Buddy Storage Shelf - C7 Corvette. Add utility to your Stingray's Dash Storage compartment and stop all of it's interior contents from sliding around and creating a pile. Manufactured from 5052 Aluminum Alloy and finished with a textured Powder Coat, this bin storage unit is designed with a 3 degree negative slant to keep your items from moving forward. The Bin Buddy also features a lip on the top shelf with felt to protect your belongings. The CAD design makes for a perfect fit. Will not interfere with the screen sliding closed and leaves easy access to your utility port. Patent Pending. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Corvette Seat Belt Stay

Sandy Eggo Designs Seat Belt Stay - C7 Corvette. New and Improved. As many C7 owners know, there's an opening on the top of the seat belt guides that allows your seat belt to slip in and out of the guide. This is a problem because when out of the guide, the seatbelt can rub against the seat material, may not be in the optimal shoulder/chest position and seat belt may be harder to locate. The V2 design clips into place with positive latch seating and now features a smooth ABS plastic surface that minimizes friction and insures easy movement of the seat belt. Sold as a pair (2).

The C7 Seatbelt Stay simply slips over the top of the guide to bridge the opening.

"A Simple Solution To A Simple Problem"

Fitment: C7 Corvette Stingray and Corvette Z06. (2014 - 2018)

C7 Corvette Door Dog

C7 Corvette Door Dog from Sandyeggo Designs. Add convenience and utility to your C7 Corvette door handle. The Door Dog makes opening your door a breeze. Installs in minutes and features a soft rubber button actuator to activate your door opening detent button. Use your Door Dog to open and close your door, keeping fingerprints off your paint and glass. Installation is simple, uses factory mounting locations and does not require permanent modification to your car. Patent Pending. Made in the USA.

Sold as a set of (2) Driver and Passenger sides

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Corvette Bin Guard

C7 Corvette Sandyeggo Designs Bin Guard. Add convenience and utility to your C7 Corvette Dash Storage compartment and stop all of it's interior contents from sliding around and jamming the screen. Manufactured from impact resistant polycarbonate. and CAD designed for a perfect fit. The front shield of the Bin Guard pivots into place and prevents items in the infotainment cubby from sliding around and jamming. The design makes for a perfect fit and will not interfere with the screen sliding open or closed. The Bin Guard leaves easy access to your utility port. Patent Pending. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Sandyeggo Designs C7 Corvette Steering Wheel Marker

C7 Corvette Sandyeggo Designs Steering Wheel Top Center Marker. Add a visual reference to your steering wheel with this vinyl wrap. Simply peel off the protective backing and wrap your steering wheel for a simple and easy modification. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

C7 Corvette Hatch Switch Mount

C7 Corvette Recessed Trunk Switch Mount from Sandyeggo Designs. Stop opening the hatch of your C7 Corvette with your knee with this recessed switch mount. Simple but affective, the switch mount moves your oem button inward so that it can not be accidently pressed when entering or exiting the vehicle. Switch operates normally after installation and requires no permanent modification to your C7 Corvette. Works for ALL C7 Corvette switch configurations.

Product Note: Switch Not Included

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Sandyeggo Designs C7 Corvette Vitesse Throttle Control Mount

C7 Corvette Sandyeggo Designs Vitesse TC Mount. Mount the Vitesse Motorsports Throttle Controller in your C7 Corvette Stingray, Grand Sport, Z06 and ZR1. Provides a clean and convenient mounting solution and puts the controller at your finger tips. Manufactured with black 20 gauge steel for a worry free lifetime of use.  

Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Product Note: Throttle Controller NOT INCLUDED

Corvette Roof Locator Seals

Replace those worn out roof locator seals without having to replace the whole assembly. Made from Ethylene Propylene Diene Monomer Rubber (EPDM) which offers superior resistance to heat, light and Ozone. These roof locator seals provide a high degree of vibration dampening and are a direct fit for your C5, C6, C7 and C8 Corvette. Sold as a set of (2)

Fitment:  C5, C6, C7 and C8 Corvette Stingray, Grand Sport and Z06 (1997 - 2023)

C7 Corvette Seat Covers

C7 Corvette Sandyeggo Designs Seat Covers. Specifically designed for the C7 Corvette Standard Seat, these seat skins are both durable and good looking. Manufactured with a high quality Leatherette and microsuede Leatherette inserts. CAD designed to insure a precise fit, these seat covers feature heavy duty nylon double stitching for every seam. Sold as a set, Drivers and Passenger Seat. 

Made in the USA.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Fitment: Standard Seats. WILL NOT FIT Sport Seats 

Sandyeggo Designs C7 Corvette Console Tray

C7 Corvette Sandyeggo Designs Console Tray. Add security for your beverages and convenience for your cell phone with this easy to install Console Tray. This is a direct bolt-in replacement for the OEM Cup Holder and features a 3.3 inch dual angle cup recess, cell phone pocket and coin slot. The utility tray uses an air tight gasket to keep spilled liquids from seeping into the console. The console tray also features easy routing for your USB cable. Patent Pending. Made in the USA.

Fitment:  C7 Corvette Stingray, Grand Sport and Z06 (2014 - 2019)

Corvette Pepper Spray Mount

Keep your pepper spray at your finger tips with this CAD designed, rattle free canister mount from Sandy Eggo Designs. Holds standard 1.5 ounce pepper spray canister. Simple installation and does not require permanent modification to your Corvette

Fitment:  C5, C6, C7 and C8 Corvette Stingray, Grand Sport and Z06 (1997 - 2023)