C8 Corvette Parts and Accessories

C8 Corvette Stingray NoviStretch Bra

C8 Corvette NoviStretch Bra. Protect the paint on your Stingray with the NoviStretch Bra. Made with a high tech durable synthetic stretch fabric, the C8 Corvette NoviStretch Front End Protection allows for quick and easy installation and removal. The stretch fabric allows for a tight, secure fit that will not flap around in the wind. The mesh fabric allows free air flow. The Mesh Material is washable with mild soap and water and quick drying, making this the perfect bra for long or short road trips. The NoviStretch front bumper mask includes a limited 12 Month Warranty. Made in the USA. FBM850V

The C8 Corvette Stingray NoviStretch Bra has been used for generations, gong all the way back to 1997. The easy on and easy off make it ideal when an unexpected trip comes up and its light and compact design allows you to pack it up and store it in the front or rear storage compartment. The NoviStretch Bra will keep bugs and road debris from getting embedded in your paint and clearcoat. Installs by replacing some factory screws with the provided replacement fasteners, and then snapping the matching / corresponding fasteners on the stretch bra. Protect the paint on your car with C8 Corvette NoviStretch Bra.

Fitment: C8 Corvette Stingray 2020 to Current

Product Note: Will cover forward facing cameras and vision will be less defined

C8 Corvette Stingray Headers

Don’t allow your restrictive factory exhaust to prevent your engine from reaching its maximum potential. Bolt-on a set of new AFE Twisted Stainless Steel Headers and gain the highest amount of horsepower and improved throttle response. The C8 Corvette aFe Twisted Steel Headers have been dyno-tested and has shown to produce up to 24 HP and 17 ft./lbs. torque additional power gains.

C8 Corvette aFe Twisted Steel Headers are built tough with its 16-gauge 304 grade stainless steel construction. They are guaranteed to endure the most punishing driving conditions under the hood while pumping out as much horsepower and torque from your engine as possible. Their mandrel bends diminish restrictions and offer the smoothest pathway for exhaust gas flow, optimizing efficiency and boosting performance. This exhaust upgrade also gives you a powerful sound when you hit the gas, letting you know that your V8 is at its peak performance. The twisted C8 Corvette Stingray Headers feature a Tri-Y design and tubes with optimized length for better scavenging and greater exhaust flow. Its built with stainless steel flanges for a secure seal and TIG welded inlet ports that doesn’t warp even in extreme conditions. AFE 48-34148 has 1-7/8” – 2-1/8” – 2-3/4” piping diameters and includes auxiliary O2 bung and plug for wideband O2 sensor or other equipment.

These AFE headers comes complete with factory gaskets and manifold bolts for an easy, direct bolt-on installation, without cutting or modifications. They retain all factory sensors and compatible to work with factory catalytic converter. These twisted stainless steel C8 Corvette Stingray Headers are currently not CARB compliant and are not legal for sale or use on vehicles registered with the California Department of Motor Vehicles and other states that follow CARB standards. All AFE headers are manufactured to the highest quality standards in Corona, California, USA and are backed by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray (2020 to Current)

Product Note: Not legal for sale in the State of California 

C8 Corvette Tri-Y Headers

Your C8 Corvette’s engine will never know real power until you dump the restrictive stock set up. aFe Power made the Stainless Steel Twisted Headers to be your C8’s ultimate exhaust upgrade for more power, greater performance, and maximum efficiency. Based on in-house dyno-testing, your engine can get up to 24 HP and 17 ft./lbs. torque additional power gains.

C8 Corvette aFe Twisted Steel Headers - Brushed Finish have primary tubes made entirely of 16-gauge 304 grade stainless steel to offer superior strength and maximum performance. They are mandrel bent with optimized diameters of 1-7/8” – 2-1/8” – 2-3/4” to guarantee massive, unrestricted exhaust flow for all-out horsepower and torque gains. Its Tri-Y design with optimized tube lengths enhances cylinder scavenging and further improving exhaust flow. The brushed finish of the C8 Corvette Tri-Y Headers offer superior protection against corrosion while adding some exotic look to your ride. This system delivers              powerful sound every time you hit the gas pedal letting you know that more horsepower and torque are pumped out from your V8. C8 Corvette aFe Twisted Steel Headers with Brushed Finish are built with TIG welded inlet ports for solid strength against warpage and stainless steel flanges to achieve a leak-proof seal. AFE part number 48-34148-H comes with auxiliary O2 sensor bung and plug that accommodates wide-band oxygen sensor and other equipment.

C8 Corvette Tri-Y Headers are direct-bolt on kits supplied with necessary manifold bolts and factory gaskets, no cutting or modifications required. Using the latest in CAD technology, these headers are guaranteed for a perfect fit, retaining factory sensors, and compatible with factory catalytic converter. AFE 48-34148-H Stainless Steel Twisted Headers are currently not CARB Compliant and is therefore not legal for sale or use on vehicles registered in the California Department of Motor Vehicles. It is also not for use in other states that follow CARB emission standards such as NY, ME, and others, check your state laws. All aFe Headers are 100% designed and manufactured in the USA and comes with a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray (2020 to Current)

Product Note: Not legal for sale in the State of California 

C8 Corvette Ceramic Coated Headers

Your C8 Corvette already has a very powerful engine. The only thing that’s stopping it from reaching its peak power potential is your restrictive exhaust. Get all the horsepower and torque it can possibly pump out with the new aFe Power Twisted 304 Stainless Steel Titanium Ceramic Coated Headers! C8 Corvette aFe Twisted Steel Headers - have been dyno-tested in house and produced up to additional 24 HP and 17 lbs./ft torque.

These C8 Corvette Ceramic Coated Headers are built for maximum strength and efficiency from the ground up, using only the highest quality stainless steel. The piping diameters are optimized featuring mandrel bends that will eliminate all the restrictions and allow exhaust gases to flow smoothly for more horsepower and torque. It features the Tri-Y design with optimized pipe lengths that significantly improves scavenging, boosts performance, and maximizes exhaust flow. C8 Corvette aFe Twisted Steel Headers - Titanium Ceramic Coated feature the best coating combination on the market today. Treated with a titanium color ceratoke ceramic finish on the outside and a copper ceramic coating on the inside. This combination makes these headers able to reduce high temperatures on the outside of the headers and in the engine compartment, improving engine efficiency. These headers also give your ride a crisp and powerful exhaust note when you hit the gas pedal, releasing more horsepower and torque from your V8. It is built with TIG welded inlet ports to prevent warping and stainless steel flanges for a secure, leak-proof seal. AFE 48-34148-T features 1-7/8” – 2-1/8” – 2-3/4” tubing and comes with auxiliary O2 sensor bung and plug for a wide band O2 sensor or other equipment.

aFe stainless steel C8 Corvette Ceramic Coated Headers includes all necessary manifold bolts and factory gaskets for an easy, no modifications required installation. It is precision designed for a hassle-free install, utilize factory sensors, and retain the factory catalytic converter.  AFE part number 48-34148-T is currently not compliant with CARB standards and not legal for sale or use on vehicles registered in the California Department of Motor Vehicles. It is also not legal for use on vehicles in other states that follow CARB emission standards. These stainless steel headers are proudly designed and manufactured in the USA and backed by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray (2020 to Current)

Product Note: Not legal for sale in the State of California 

C8 Corvette Muffler Delete Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips. Let your Stingray breathe with this Muffler delete exhaust system from advanced Flow engineering. Manufactured to be the loudest exhaust system for the C8 Corvette, aFe Power utilized only the most advanced CAD technology for its race-proven design and incorporated the finest stainless steel for a lifetime of satisfaction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This C8 Corvette Muffler Delete Cat Back Exhaust utilizes 3 inch – 2-1/2 inch mandrel bent T-304 solid, austenitic 304 stainless steel for unrivaled strength, harmonic balance  and long-lasting durability. The muffler delete design unleashed more HP/TQ while producing a drone free, crisp, aggressive exhaust note. This C8 Corvette aFe Muffler Delete Exhaust System is built with a mitered merge x-pipe that evenly distributes exhaust pulses across the entire system to maximize scavenging and reduce drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ inch polished stainless steel tips. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette Muffler Delete Exhaust System is designed to be an exact fit for your Stingray. It uses all the same factory style flanges and hangers so there is no welding, cutting or permanent modification required. Included is all the necessary hardware and a full set of step by step instructions for an easy installation. AFE 49-34127NM-P includes factory style exhaust valves that uses the factory motor, (not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Mach Force Exhaust System

The Mach-Force series C8 Corvette aFe Mach Force Exhaust System is the most powerful, best looking, and best aftermarket replacement for your restrictive factory exhaust. Designed using only cutting-edge CAD technology and built with T-304 stainless steel, this kit will surely outperform competition in sound, strength, and performance gains.

The C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is constructed for maximum strength and durability using 3”- 2-1/2” 304 grade stainless steel pipes with brushed finish. Featuring very smooth and precision-diameter mandrel bends, this system greatly reduces restrictions, improves engine efficiency, and produces more horsepower and torque than competition. The muffler delete design offers a very aggressive, performance growl without the obnoxious drone for a crisp, clean sound of power when you hit the gas. This C8 Corvette aFe Mach Force Exhaust System features an integrated mitered merge x-pipe that works great at balancing and distributing the exhaust pulses throughout the system to maximize scavenging and minimize droning. Utilizing the most advanced CAD technology and precision TIG welding, this system delivers race-proven design, powerful performance, and high-tolerance factory fitment. This C8 Corvette Cat Back System has an interlock flex pipe that adds more strength and durability. The kit finishes off in massive 4-1/2” quad carbon fiber stainless steel clamp-on tips with a laser-etched aFe Power logo for the authentic and aggressive styling. aFe Power part number 49-34127NM-C is specifically designed for vehicles without NPP dual mode exhaust valves. For vehicles equipped with NPP valves, the dual mode exhaust valves will be eliminated.

This kit comes with all necessary hardware and step-by-step installation instructions for a hassle-free install. The aFe Power Muffler Delete Cat Back System is designed for a custom fit, bolt-on installation using factory style flanges and hangers, without cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is proudly designed and manufactured in their Corona, California, USA facility and comes with a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built to offer powerful strength, sound, and performance. aFe Power utilized only the most innovative CAD technology for its race-proven design and the finest stainless steel for its robust construction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This Cat-back C8 Corvette AFE Exhaust System features 3” – 2-1/2” mandrel bent pipes made from solid, austenitic 304 stainless steel for unrivaled strength and long-lasting durability. The muffler delete design will unleash more horsepower and torque while producing crisp, aggressive exhaust note without droning. This C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built with a mitered merge x-piper that evenly distributes and balances exhaust pulses across the entire system to optimize scavenging and diminish drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ in. stainless steel tips with black metallic finish laser etched with the aFe Power logo for the stealth look. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette AFE Exhaust System is precision designed for a custom, high tolerance fitment on your vehicle. It uses factory style flanges and hangers for a secure fit, no welding or modification required. The kit includes all necessary hardware and comprehensive instructions for a complete and easy install. AFE 49-34127NM-B includes factory style exhaust valves (using factory motor, not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette 49-34124-P AFE Exhaust System

Add power and performance to your C8 Corvette Stingray with an aFe Mach Force XP Exhaust System. The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Polished Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on Polished tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-P is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System was manufactured as a direct-bolt on installation to your C8 Corvette Stingray, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. 

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Stingray AFE Exhaust System

aFe Power utilized the latest in CAD technology and only the highest quality metal construction to offer the race-proven design and superior performance of the C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips. The in-house experts at AFE dyno-tested this C8 Corvette exhaust upgrade and has proven to produce up to additional 9 HP and 10 lbs./ft. torque.

The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-B is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System is designed for a direct-bolt on installation to your C8 Corvette, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. All AFE Power performance parts are proudly designed and manufactured in their Corona, California, USA facility.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips is a great performance upgrade for your restrictive factory setup. This high quality exhaust kit is exactly what your Corvette needs to achieve increased flow, powerful sound, more horsepower, torque and improved performance. This C8 Corvette AFE Exhaust System is dyno-tested in-house and produced up to 9 HP and 10 lbs./ft torque in performance gains.

The Mach Force-XP system is built of 3” – 2-1/2” mandrel bent 304 grade stainless steel pipes for extreme strength and reliable performance. This cat-back exhaust is crafted using the latest in CAD technology and then TIG welded for the custom fit and race-proven design. The brushed finish adds more durability, sleek look, and maximum corrosion resistance. It features a stealth looking high-flow muffler that unleashes trapped horsepower and produces crisp, clean tone resounding power while minimizing drone. The AFE muffler comes with an integrated X-pipe that effectively balances and equally distributes pulses throughout the entire system, resulting to diminished drone and maximum scavenging abilities. This muffler is finished with a high-temperature metallic black coating for long-lasting durability. For more strength and durability, the C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips utilize a robust flex pipe with internal interlock liner. AFE 49-34124-C only fits C8 Corvettes with NPP dual mode exhaust valves, included in the factory performance exhaust option and the Z51 performance package. It uses factory style valves (using factory motor, not included).

The C8 Corvette AFE Exhaust System is supplied with all necessary hardware and step-by-step installation instructions for a complete install. This direct bolt-on system utilizes the factory style flanges and hangers for a hassle-free installation, no welding or any modification required. All AFE products are never outsourced, they are proudly designed and manufactured in Corona, California, USA. This aFe Mach Force-Xp Exhaust System for the C8 Corvette is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Throttle Body Spacer

Maximize horsepower and improve throttle response without the obnoxious whistling with the C8 Corvette aFe Throttle Body Spacer! This inexpensive upgrade installs between the stock intake system and the throttle body and improves volumetric efficiency. This results to optimum air and fuel ration, maximum combustion, and greater horsepower and torque gains.

The C8 Corvette aFe Throttle Body Spacer is precision machined from premium quality, solid 6061-T6 aluminum for maximum performance, weight reduction, and high strength. Its unique serrated/helix design creates more air turbulence than typical helix only throttle body spacers. The greater air turbulence optimizes the air and fuel ration for maximum combustion, resulting to more horsepower and torque gains and improved throttle response. C8 Corvette Throttle Body Spacer also does not produce the annoying whistling sound commonly associated with throttle body spacers. Its black anodized finish protects against corrosion while improving the looks of the engine bay. AFE 46-34017B Throttle Body Spacer is designed for use on factory intake system only.

The C8 Corvette Throttle Body Spacer includes all hardware needed and easily installs into the factory mounting location. Each kit comes with a high quality gasket for a 100% secure seal, durable silicone coupling that guarantees the perfect fitment and uncompromised air flow into the factory air intake system, and step by step installation instructions. This AFE Power Throttle Body Spacer for C8 Corvette models is currently not CARB exempt and is not for sale or use on vehicles registered in the California Department of Motor Vehicles. AFE Power part number 46-34017B is also not legal for use on vehicles registered in other states that follow CARB standards, check your local state emission standards. All AFE Silver Bullet Throttle Body Spacers are proudly designed and manufactured in the USA and covered by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Will NOT fit on an aFe Intake Systems

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Intake Throttle Body Spacer

The C8 Corvette aFe Silver Bullet Throttle Body Spacer is an easy, effective, and inexpensive way to upgrade your engine’s performance and improve fuel efficiency. It has been dyno-tested to add up to 12 hp and 14 ft./lbs of torque without the whistling typically associated with ordinary helix spacers. If you are looking at supercharging your C8 Corvette’s combustion chamber, the aFe Silver Bullet Throttle Body Spacer is the quiet yet most powerful solution.

To guarantee long-lasting strength, weight reduction, and superior performance, the C8 Corvette aFe Silver Bullet Throttle Body Spacer is CNC crafted from solid 6061-T6 aluminum. The innovative serrated/helix design creates power-generating air turbulence that helps achieve the best air and fuel ratio for maximum combustion. This increases horsepower and torque, improves throttle response, and boosts engine performance without the obnoxious intake whistling. The C8 Corvette AFE Intake Throttle Body Spacer features a black anodized finish too add a stealth look into the engine bay. This C8 Corvette AFE 46-34023B Silver Bullet Throttle Body Spacer will only fit aFe Power Intake Systems part numbers 57-10013D, 57-10013R, 58-10007D, and 58-10007R. For factory intake systems, use throttle body spacer part number 46-34017B.

The C8 Corvette AFE Intake Throttle Body Spacer kit comes with all necessary hardware and uses factory mounting locations for the hassle-free installation. It’s supplied with a premium gasket for the perfect seal, silicone coupling for the secure fitment with the aFe Power intake system, and comprehensive installation instructions. This product is currently not CARB exempt and is not legal for sale or use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in other use that follows CARB emission standards. This AFE Throttle Body Space for C8 Corvette models is proudly made in the USA and backed by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Will NOT fit on an OEM Intake

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Air Filter

For the best Corvette yet, aFe Power engineered the highest flowing air filter in their lineup. The C8 Corvette aFe Magnum FLOW Pro 5R Air Filter is created to feed the new LT2 V8 engine with colder, denser and cleaner air for maximum performance. C8 Corvette performance air filter part number 10-10148 can deliver up to 27% air flow increase.

In terms of construction, design, and air flow technology, the C8 Corvette AFE Air Filter beats all other air filters in the market. It features not just a single layer, but five progressive layers of pre-oiled cotton gauze media with superior filtration efficiency. The progressive layering allows it to still delivery maximum air flow even when dirty. The media of the aFe Magnum FLOW Pro 5R Air Filter is the best choice for street and track driving. It has larger surface area to hold more dust while still providing high air flow, leading to longer service intervals. Cleaning and recharging it is easy with the aFe Power Cleaner and oil, sold separately. The rounded deep open pleats offer greater surface area that traps more dirt than competition. Another distinctive feature of this C8 Corvette AFE Air Filter is the progressive bump seal that works great even with the most uneven housing. Designed for the perfect sealing and fit, this pliable sealing surface eliminates the need for sealants and gaskets. The base and top are built tough with its 100% polyurethane construction. This polyurethane material is highly resistant to damage from the repeated heat cycles from the engine bay. While other materials degrade from the heat, polyurethane can maintain its original shape and strength.

This performance air filter upgrade AFE 10-10148 for the C8 Corvette is backed by a lifetime warranty for the entire life of your vehicle.

Fitment: C8 Corvette Stingray 2020, 2021

C8 Corvette AFE Intake

aFe offers the most powerful air filter and intake tube combination in their line-up for the new Chevy C8 Corvette. The C8 Corvette aFe Track Series Carbon Fiber Intake comes with everything your vehicle needs to make the most power, drive faster, and achieve its best performance.

The C8 Corvette aFe Track Series Carbon Fiber Intake uses the best and most powerful air filter from aFe Power’s line-up. The massive, dual 4 in. flange 360-degree radial flow air filters utilize the Pro-5R performance filters with the pre-oiled, progressive 5-layer cotton gauze filter media. These monster filters will deliver the highest flow of colder and cleaner air to your V8 to boost horsepower and performance. The Pro-5R provides longer service before cleaning is required and the best choice for street or track driving. The intake tube of the C8 Corvette AFE Cold Air Intake features a lightweight twill weave carbon fiber construction and innovative design to direct massive air flow to the engine. This carbon fiber intake tube works great in reducing weight compared to metal tubes while upgrading the engine bay’s appearance. To further improve engine performance and increase cold air, the filters are enclosed in a heat-resistant housing made of cross-linked polyethylene polymer. It keeps away hot engine air and collects the coolest air possible from the factory inlets on the side of the car. Custom designed for the perfect fit and easy installation, the housing uses silicone bellow couplings and mounts directly into the factory locations.

This AFE 57-10013R Cold Air Intake for C8 Corvette models include high-quality hardware for strength, durability, and secure installation. This kit comes complete with stainless steel clamps, silicone couplings, and installation instructions. The C8 Corvette AFE Cold Air Intake is currently not CARB exempt and is for use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in states that follow CARB standards. Part Number 57-10013R is backed by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Cold Air Intake

aFe Power designed the Black Series Carbon Fiber Intake to match the power of GM’s most powerful vehicle yet – the C8 Corvette. The C8 Corvette aFe Black Series Carbon Fiber Intake is fully loaded with features to further boost the all new LT2 V8.

All the power-generating abilities of the C8 Corvette aFe Black Series Carbon Fiber Intake begin from two massive five layer performance air filters. The dual 4 in. Flange 360-degree radial flow air filters will feed your engine with the biggest amount of colder, cleaner air for maximum horsepower gains. The Pro 5R air filter features inverted tops giving the filter bigger surface area for extended service intervals. From the filter, air is directed to the 100% carbon fiber intake tube that has been designed using the latest CAD technology and dyno-tested for greater air flow. The solid, carbon fiber construction is lightweight, robust, and greatly enhances the look of the engine bay. The two huge air filters are enclosed in an open-element XLPE (cross-linked polyethylene) polymer housing to keep away hot engine air maximizing engine performance. Custom-designed for a perfect fit, this heat-resistant housing directly installs into the factory mounting locations. The C8 Corvette AFE Cold Air Intake comes with a high gloss clear-coated twill weave carbon fiber cover to further diminish hot engine air, reduce weight, and match the intake tube for a very aggressive look. This intake cover features the black series emblem and aFe Power laser etched washers and bolts to boast authenticity and upgrade your engine bay’s appearance.

AFE 58-10007R intake system comes complete with high quality stainless steel clamps and durable silicone couplings for a secure installation. This C8 Corvette AFE Cold Air Intake is not CARB exempt and is not legal for sale or use on vehicles registered to the California Department of Motor Vehicles. It is also not legal for use in other states that follow CARB standards. This AFE Cold Air Intake for C8 Corvette models part number 58-10007R is backed by a limited 2-year warranty.

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AWE Exhaust System

AWE tuning combined aggression and sophistication with their Touring Edition Exhaust System! This performance package offers the most aggressive sound and performance in a sophisticated design perfect for your Vette. This kit went through rigorous testing including road-course, drag, and street environments to guarantee powerful and consistent performance in any driving condition. C8 Corvette AWE Touring Edition Exhaust have been dyno-tested to generate maximum power gains of up to 19 hp and 15 lbs-ft. of torque.

C8 Corvette AWE Touring Edition Exhaust system features AWE Tuning’s patented 180 technology Drone-canceling solution responsible for the deep, aggressive exhaust note without the dreadful drone when driving on highway speed. Because the 180 technology is controlled by your driving style, you get to enjoy the exotic loud soundtrack when driving fast or the quiet cabin comfort when cruising. The C8 Corvette AWE Exhaust System is made for maximum strength with its solid T304L stainless steel construction while offering 31 lbs. in weight savings compared to stock. The handcrafted 3 in. mandrel bent pipes with 0.65 in. wall combined with the straight through design significantly eliminate restrictions allowing smoother and faster flow of exhaust gases resulting to superior power gains and impressive performance. This Touring edition C8 Corvette AWE Exhaust System has tough 8 in. flex sections with stainless steel internal linings that diminish engine movements for improved durability. C8 Corvette AWE Cat-back Exhaust ends in massive quad 4.5 in. double-walled slash cut tips that comes in a striking Chrome Silver finish (part number 3015-42151) and stealth-looking Diamond Black finish (3015-43159).

It is supplied with AFM valve stimulators, high quality aluminum heat shield, and installation instructions. Designed for an easy direct-bolt on installation, no cutting or modifications necessary. This performance exhaust will not affect your vehicle’s factory emissions equipment. This kit is proudly engineered and manufactured in-house in AWE’s Pennsylvania USA facility, using all-American made materials. This Touring Edition C8 Corvette Cat-Back system comes with AWE’s perfect fit guarantee, No CEL guarantee, and lifetime warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray Coupe and Convertible

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AWE Exhaust System - Muffler Delete

Your C8 Corvette deserves the best sounding and most powerful exhaust on the planet. With its sophisticated bespoke asymmetric design, the C8 Corvette AWE Track Edition Exhaust will deliver AWE’s signature tone while improving horsepower gains throughout the RPM range. This performance exhaust went through rigorous testing in drag, road-course, and long-term street environments to ensure that it will unlock your engine’s full power potential. C8 Corvette AWE Track Edition Exhaust system has been dyno-tested to produce maximum power gains of up to 19 hp and 15 lbs.-ft torque at the wheels.

This cat-back C8 Corvette Muffler Delete Exhaust System is hand-crafted from 0.65 in. walled T304L stainless steel that is superior in strength and durability but weighs so much lighter than your stock system. This track edition kit offers up to 39 lbs. in weight savings compared to the factory set up. They feature CNC-machined mandrel bends, optimized pipe diameters, and a straight-through design allowing smoother, faster exhaust flow for maximum performance and improved throttle response. The C8 Corvette Muffler Delete Exhaust System is built with rigid 8 in. internally lined stainless steel flex sections that work great in isolating engine movement for life-long reliability. This powerful system exits in quad 4.5 in. double-walled slash cut tips that comes in Chrome Silver finish (part number 3020-42080) or Diamond Black finish (part number 3020-43086) for the added stealth looks.

The Track Edition Cat-back exhaust system is supplied with AWE AFM valve stimulators, premium quality aluminum heat shield, and installation instructions. This kit is designed for a hassle-free direct bolt-on installation, no cutting or modifications required. It does not affect factory emissions equipment. The C8 Corvette AWE Cat-back Exhaust system is proudly engineered, manufactured, and astringently tested in AWE’s Pennsylvania, USA facility. It comes with AWE’s perfect fitment guarantee, No CEL guarantee, and limited lifetime warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Lloyd Rubbertite Floor Liners

If you are looking for solid all-weather protection against snow, dirt, spills, and mud during the hottest summer days and freezing cold winters, the C8 Corvette Lloyd Mats Rubbertite floor mats are your best choice. Just like all Lloyd custom mats, the Rubbertite all-weather floor liners are precisely cut to the exact specifications of your vehicle to ensure the best possible fit and larger coverage. These superior quality rubber mats excellently trap water, mud, spills, sand and snow to keep your OEM carpet clean and dry for a long time. When it comes to the best and most advanced floor protection all year long, C8 Corvette Lloyd Rubbertite Floor Liners are tough to beat.

Lloyd combined the robust construction and cutting-edge design when they designed the Rubbertite floor liners. Featuring a heavy-duty composition rubber material that is exceptionally durable, these all-weather liners will remain flexible even during subzero temperatures. What sets the C8 Corvette Lloyd Mats Rubbertite floor mats  apart from the rest is its very distinctive dimpled design that can hold more spills, debris, and dirt than other liners.  Each liner has hundreds of these molded “wells” offering excellent protective coverage for your factory carpets. They trap all the dirt until you are ready to remove and hose them off for easy and fuss-free maintenance. The textured surface feels good to the feet and will improve driving comfort for you and your passengers. Its molded non-slip nib backing keeps in place and prevents sliding around. The C8 Corvette Lloyd Rubbertite Floor Liners come in 13 popular color options that will complement your factory color and upgrade your cabin’s overall style.

The C8 Corvette Lloyd Rubbertite All-weather Mats are designed and crafted in the USA using only American-made materials to ensure the best quality and service. They are backed with a limited 3-year warranty against defective materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Floor Mats 

These C8 Corvette Floor Mats are the best value carpets for your money. These high-quality floor guards combine durability, style, and functionality all in one package. Lloyd used their state-of-the-art, computer-driven cutting process to ensure that these Velourtex carpets can offer edge-to-edge protection to your pristine floor boards. The stylish design and the silky construction of the Velourtex are tough against all the dirt and liquids that can stain your OEM carpets. No other carpeted liners will fit better and look better on your new Vette than the C8 Corvette Lloyd Velourtex Floor Mats.

C8 Corvette Velourtex Lloyd Floor Mats are made to be heavier and denser than standard carpet mats. Lloyd Mats manufactured the Velourtex using superior quality continuous filament nylon yarn that is 22 oz. per yard providing a silky-smooth surface texture while offering solid floor defense. A moisture-resistant layer is added to these carpets adding rigidity and maintaining its shape while improving protection against moisture and spills. The patented rubber TractionBac backing creates a friction surface to hold these mats in place, preventing them from slipping or sliding around. Employing the most advanced AutoCAD ultrasonic cutting technology, each Velourtex carpet is precision-patterned and tailored to the exact dimensions of the 2020 C8 Corvette’s flooring for the best possible fit and total coverage. Compared to standard carpets, C8 Corvette Lloyd Mats Velourtex covers larger floor area for maximized protection against stains, dirt, and liquids. Choose from twelve popular colors that will complement your style and upgrade your interior’s overall looks.

These custom fit carpets are easily and securely installed in your vehicle’s foot well using Lloyd’s anchors or factory compatible anchors. The C8 Corvette Floor Mats are 100% designed and manufactured in the USA using all-American made materials. They are covered by a limited 3-year warranty against defects in design, materials, and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Luxe Trunk Mat

The Lloyd Luxe Series Cargo Mats are the best combination of luxury, style, and protection rolled into one. The brilliant engineers at Lloyd Mats used the highest quality materials and sophisticated design technology to make the Luxe series the most luxurious automotive carpets ever made. Aside from that, the C8 Corvette Lloyd Mats Luxe Double Logo Rear Cargo Mat is patterned using the most advanced AutoCAD ultrasonic cutting equipment to make sure that they follow the exact contours of your floor boards for the most precise fit.

Every inch of the  C8 Corvette Lloyd Luxe Cargo Liners is luxuriously made with the thickest and heaviest carpets that are three times the weight and thickness of regular carpets. The Luxe features 48 oz. per yard of continuous filament premium nylon yarn that is so plush yet very tough against fading, wearing, and stains. The surface is treated with Scotchguard for extra bulk and protect against dirt and grimes, keeping them clean and easy to maintain. The carpet pile of the Lloyd Luxe Cargo Liners is half an inch deep creating a really lush surface, no other mats can feel and look more luxurious. The multiple layer backing of the C8 Corvette Lloyd Mats Luxe Double Logo Rear Cargo Mat resists moisture and soiling to keep factory carpets clean and dry all the time. These deluxe cargo mats have non-skid backing with a urethane core to keep the mats in place and diminish outside road noise.

C8 Corvette Lloyd Luxe Trunk Mats comes in eleven popular factory colors with the laser etched double Corvette logo for a more authentic and refined interior appearance. These plush carpets allow for a hassle-free and secure installation using existing factory anchors in your vehicle or the included compatible anchors in your Luxe cargo liners. All C8 Corvette Lloyd Luxe Trunk Mats are designed and manufactured in the USA and comes with a lifetime warranty.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Luxe Trunk Mats

The C8 Corvette Lloyd Mats Luxe Single Logo Rear Trunk Mat is designed specifically to give your vehicle the high-end protection it deserves. The Luxe series is Lloyd’s most premium carpet line where they combined luxury with heavy-duty construction and sophisticated design. Compared to standard trunk mats, these deluxe liners are three times denser and heavier for improved resistance to dirt and long-lasting durability. Each Luxe trunk mat is laser cut to the exact dimensions of your Corvette’s trunk area for the most precise fitment possible.

The C8 Corvette Lloyd Mats Luxe Single Logo Rear Trunk Mat is made with the highest quality, thickest, and most plush carpet material available. These luxurious liners feature a 48 oz. per yard premium nylon construction and half-inch pile depth that resists dirt, stains, and fading while offering the smoothest tactile surface. The brilliant engineers at Lloyd added the signature Scotchguard treatment for extra bulk and improved defense against all the grimes that can damage your OE carpets. C8 Corvette Lloyd Luxe Trunk Mats are easy to keep clean and maintain, you don’t have to worry about regular deep cleaning. The non-skid backing made of soft urethane keeps these trunk mats in place while reducing outside road noise.

Get the C8 Corvette Lloyd Trunk Liners in your color of choice from the eleven popular color options that will easily match and improve your cabin style. And who would have thought that factory looks can be more authentic and luxurious? The laser etched single Corvette logo on these mats just made it possible. Install the premium carpets using the factory anchors in your vehicle or the Lloyd factory compatible anchors included in the package. Your C8 Corvette Lloyd Luxe Trunk Mats are precision designed, manufactured, and tested in Lloyd Mats’ Northridge, California, USA facility. For your peace of mind, they are backed by a lifetime warranty against defects in materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Luxe Trunk Mat

Every inch of your brand new C8 Corvette spells luxury, from the inside out. Lloyd created the perfect cargo mats to deliver the ultimate floor protection in a very luxurious package. The C8 Corvette Lloyd Mats Luxe Double Logo Front Cargo Mat is designed to keep your C8’s factory floor carpet in its pristine condition while adding luscious comfort on your feet and high-end cabin styling. The Luxe series is Lloyd’s finest, thickest, and most plush carpets but they also come with all the solid durability and precise fitment all Lloyd Mats are known for.

Like your Corvette, every inch of the Luxe Cargo Liners is a product of only high-end materials and sophisticated design technology. C8 Corvette Lloyd Luxe Trunk Mats are made with 48 oz. per yard premium nylon that is three times heavier and denser than regular automotive carpets. Your C8 Corvette also gets three times the defense, comfort, and durability from these premium carpets. It features ½ in. pile carpet to gives you and your passengers a deep lush to sink into for comfort when stuck in traffic or on long road trips. The surface of the C8 Corvette Lloyd Luxe Trunk Mats is treated with Scotchguard protection to resist fading, stains, and wear. They do such a great job in repelling all the nasty grimes for easy maintenance, you don’t have to worry about regular deep carpet cleaning. The non-skid backing of the C8 Corvette Lloyd Luxe Cargo Liners prevents it from sliding around while adding extra cushion and diminishing exterior road noise.

These deluxe floor liners come in eleven popular color options with laser embroidered double Corvette logo for the best customized and authentic style. Your C8 will even look more high-end on the inside with the added plush and flare. For safe and easy installation, they attach to the factory anchors or comes supplied with factory compatible anchors. The C8 Corvette Lloyd Mats Luxe Double Logo Front Cargo Mat is made of 100% American-made materials in their Northridge, California, USA facility. All Luxe cargo liners are backed with a lifetime warranty against defective materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Mats Front Trunk Mat

The Lloyd Luxe Series Cargo Mats are the thickest, heaviest, and most luxurious automotive carpets in the market. Lloyd used only the most premium materials and sophisticated computer design technology to offer the best in comfort and style. Adding a new set of C8 Corvette Lloyd Mats Luxe Single Logo Front Cargo Mat will take your driving experience to a whole new different level of luxury and pleasure, all while keeping your factory carpets totally protected from everything. If you love your new C8 Corvette, do not settle for anything less than the plush protection the Luxe Cargo Liners can give.

C8 Corvette Lloyd Mats Trunk Mats are three times the weight, density, and protection of standard carpets for its plush 48 oz. per yard premium nylon construction. The carpet surface is so lush with half an inch pile depth, your feet can sink in to feel its high-end softness and comfort. C8 Corvette Lloyd Mats Luxe Single Logo Front Cargo Mat is also equipped with all high-quality features for long-lasting durability and solid floor defense. These cargo liners are resistant to practically everything – moisture, dirt, wear, and fading after being treated with the best Scotchguard protection. With Scotchguard, the C8 Corvette Lloyd Mats Trunk Mats can stay clean and free from all the dirt and stains that you don’t have to worry about deep cleaning.

They are offered in eleven color options to complement your cabin’s design and personal preference. The laser embroidered iconic Corvette logo on these mats add a more authentic look while matching the luxurious styling of your fresh new ride. The Lloyd Luxe Cargo carpets are compatible with existing anchor points or comes with factory compatible Lloyd anchors for an easy and secure installation. C8 Corvette Lloyd Mats Trunk Mats are proudly designed and manufactured in the USA and backed by a lifetime warranty against defective materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Ultimat Trunk Mat

C8 Corvette Lloyd Mats Ultimat Trunk Mats have been around since 1978 as Lloyd’s first automotive floor carpets. Well-known for combining the best of function and style, the brilliant designers and engineers at Lloyd did not stop at making improvements to guarantee that the Ultimat will remain to be everything it’s been known for and even more. Lloyd utilized the latest computer design technology to make sure that the Ultimat Floor Carpets are the best-fitting automotive carpets in the market. The new C8 Corvette Lloyd Mats Ultimat Double Logo Front Cargo Mat is guaranteed to deliver the ultimate protection, coverage, and style on your Vette for a long time.

The C8 Corvette Lloyd Mats Ultimat Trunk Mats are very bulky and dense to provide tougher protection than standard carpet liners. Its top most layer is built with 32 oz. per yard 2-ply nylon with 5/16 in. pile height for the luxurious feel and intense durability. It features a woven polypropylene backing to add stiffness and to maintain the mat’s solid shape. The latex layer is water and moisture resistant to keeping OE carpets dry and protected from all kinds of liquids and spills. Lastly, Lloyd added their patented rubber TractionBac with excellent non-skid properties to constantly secure the mats in place. C8 Corvette Lloyd Mats Ultimat Double Logo Front Cargo Mat has an expansive color selection of 30 popular options that will effortlessly upgrade your vehicle’s interior style and comfort. The embroidered double Corvette logo will add a more authentic look while the woven polyester cloth edge binding will match the OE carpets and won’t unravel with regular use.

Each set of front Ultimat cargo liners are supplied with factory compatible anchors for an easy and secure installation. C8 Corvette Lloyd Mats Ultimat Floor Liners are precision designed and manufactured in the USA and is backed by a limited 5-year warranty against defects in materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Ultimat Trunk Mat

Lloyd’s Ultimat Series Cargo Mats are well-known for their unbeatable style, durability and functionality since 1978. Using the most advanced computer design technology, sophisticated manufacturing techniques, and stringent testing standards, the Ultimat has become even better. Today, C8 Corvette Lloyd Ultimat Rear Trunk Mats are still everything they are known for but the innovations enabled them to offer better floor coverage, tougher defense, and more luxurious styling.

All C8 Corvette Lloyd Ultimat Rear Trunk Mats are made only with the highest quality materials that will survive the test of time and all the grimes. The surface of the carpets is made of thick and dense 32 oz. per yard 2-ply continuous filament nylon that is both luxurious to the feet and durable to the core. It is then supported by a woven polypropylene layer to add rigidity and maintain the mat’s solid shape. Additionally, the C8 Corvette Lloyd Mats Ultimat Double Logo Rear Cargo Mat features a latex layer that prevents liquids, moisture, and spills to damage factory carpets, keeping it clean and dry. Lloyd added their patented rubber TractionBac backing with excellent non-skid and non-slip properties to keep the mats glued to the floorboards all the time. If you want crush-resistant, moisture-resistant, and wear-resistant protection for your Corvette’s pristine OE carpets, nothing will come close to what the C8 Corvette Lloyd Mats Ultimat Double Logo Rear Cargo Mat can deliver.

Choose from an expansive selection of colors that will either match or add flare into your cabin’s interior styling. The laser embroidered double Corvette logo on these rear Ultimat Cargo Mats will create a more authentic and customized looks that is almost like factory. Each set comes with factory compatible anchors for a hassle-free and secure installation.

The C8 Corvette Lloyd Ultimat Rear Trunk Mats are proudly designed and manufactured in the USA and comes with a limited 5-year warranty against defective materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Mats Single Logo Rear Trunk Mat

The Lloyd Ultimat Custom Fit Cargo Mats have been providing unbeatable floor protection and luxurious interior styling since 1978. Being the original automotive custom carpets offered by Lloyd Mats, the Ultimat series has continued to evolve with the most advanced manufacturing techniques and the latest in computer design technology. Each carpet is digitally measured to the same exact dimensions of your vehicle’s floor boards for the best and most precise fit. Lloyd Mats guaranteed that when it comes to coverage and fitment, nothing can do it better than the Ultimat. On top of that, the C8 Corvette Lloyd Mats Ultimat Single Logo Rear Cargo Mat is made to last with the toughest materials and multiple-layer construction.

 C8 Corvette Lloyd Ultimat Rear Cargo Mats are everything you need to keep your factory carpets protected from all the dirt, liquids, spills, and other nasty elements. Built with superior quality 32 oz. per yard continuous filament 2-ply nylon material, these cargo carpets are remarkably crush-resistant, moisture-resistant, and fade-resistant. The C8 Corvette Lloyd Ultimat Cargo Liners are very bulky and dense that they are twice the weight of standard automotive carpets. The tufted yarn is 5/16 in. deep creating a very luxurious surface that will surely improve driving comfort while adding more durability. Unlike ordinary carpets, the C8 Corvette Lloyd Ultimat Rear Cargo Mats have multiple backing layers maximizing protection and strength. Underneath the smooth surface is a woven polypropylene layer that holds the pieces all together maintaining the mat’s solid shape. The water and moisture resistant latex layer keeps the factory carpets fresh and dry while improving the mat’s core rigidity. Lastly, Lloyd’s patented TractionBac layer made of premium rubber will hold the mat in place and prevent it from slipping or sliding around when the vehicle is moving.

The C8 Corvette Lloyd Mats Ultimat Single Logo Rear Cargo Mat comes in OEM matching colors that will match your vehicle interiors. For easy and secure installation, they are supplied with factory compatible anchors. All Lloyd Ultimat Cargo Liners are precision crafted in the USA using all-American materials and backed by 5-year warranty.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Mats Single Logo Front Trunk Mats

As Lloyd Mat’s original custom fit floor carpets, the Ultimat has proven to be the best at providing reliable floor protection while upgrading interior style and comfort since 1978. Over the years, Lloyd has made continuous improvements using the latest in Computer Assisted Design technology to ensure that Ultimat Carpet Cargo liners are cut precisely to the exact dimensions of your specific vehicle. Compared to standard floor liners, the C8 Corvette Lloyd Mats Ultimat Single Logo Front Cargo Mat offer wider floor coverage to better protect your OEM carpets from spills, dirt, stains, and fading

C8 Corvette Lloyd Mats Ultimat Trunk Mats are crush resistant, moisture-resistant, and extremely durable with its high-quality 32 oz. continuous filament nylon construction. The two-ply, heat-set woven yarn gives the Ultimat exceptional density and weight that is twice that of factory carpets. The 5/16 in. pile height protects against fading and wear while providing a luxurious tactile surface for maximum comfort on your feet. The Corvette Lloyd Mats Ultimat Single Logo Front Cargo Mat has multiple backing layers that begins with a woven polypropylene material that adds stiffness and holds the mats in shape. The water-resistant latex layer adds more weight and works great at keeping your Corvette’s factory carpets clean and dry. The patented rubber TractionBac backing has superior non-skid and non-slip properties to securely hold the C8 Corvette Lloyd Mats Ultimat Floor Liners in place. It as a matching continuous cloth edge to match your OE carpets that won’t unravel under normal use. The Ultimat Custom floor carpets are available in 30 popular factory colors with laser embroidered Corvette logo that will effortlessly match your interiors while adding the best in custom styling.

C8 Corvette Lloyd Mats Ultimat Trunk Mats are installed easily and securely with the included factory compatible proprietary anchors. All Lloyd Ultimat Custom Fit Floor Mats are proudly made in the USA and comes with a limited 5-year warranty.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Ultimat Floor Mats

The Lloyd Ultimat Custom Fit Floor Mats are still the finest floor mats in the market, offering the best in both functionality and style for more than four decades now. Being Lloyd Mat’s original series launched in 1978, these custom carpets have evolved with continuous improvements and design upgrades. If you are looking for the best protection against wear, grimes, fluids, moisture, and all other elements, go for the tried and tested, go for a set of C8 Corvette Lloyd Mats Ultimat Double Logo custom carpets.

The multi-layer construction using premium quality materials make the C8 Corvette Lloyd Ultimat Floor Mats more durable than other carpet mats. Every inch of the Ultimat carpets are remarkably bulky and dense with the 32 oz. per yard continuous filament nylon material. These custom carpets are twice thicker and heavier than standard mats with its  two-ply construction, weaving two nylon yarns into one tuft creating a tougher core. The C8 Corvette Lloyd Mats Ultimat Double Logo carpets have four layers of backing for maximum strength and durability.  The topmost layer is the polypropylene mesh supporting the tufted yarn and giving its shape. The next layer made of extra heavy latex adds rigidity to the carpet, maintaining its form. The water-resistant layer traps moisture, keeping the factory carpet dry and clean. Lastly, the distinctive rubber TractionBac layer of the C8 Corvette Lloyd Ultimat Floor Mats create a friction surface securely attaching the mat to the carpet to prevent it from sliding around. Choose from 30 different color options to match your style and interiors. With the embroidered double Corvette logo in these carpets, they will complement your interiors perfectly and upgrade factory styling.

Each set of these perfectly fitted carpeted liners install easily with the included factory compatible anchoring device for the secure attachment. The custom fit Ultimat 2020 C8 Corvette Floor Mats are proudly designed and made in the USA and comes with a limited 5-year warranty against defects in materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Ultimat Floor Mats

The Lloyd Ultimat Custom Fit Floor Mats have been the leading aftermarket carpet mats since 1978. For more than four decades, the Ultimat remains unbeatable in quality, style, and fit. These C8 Corvette Lloyd Mats Ultimat Single Logo carpets are precision measured to the exact dimensions of your 2020 Chevrolet C8 Corvette to deliver complete coverage and absolute protection. When it comes to the best of both function and style, the custom fitted C8 Corvette Lloyd Ultimat Floor Mats are the original and still the best.

The Lloyd Ultimat 2020 C8 Corvette Floor Mats have solid core strength with its four layer construction. They utilized continuous filament yarn that is 32 oz per yard and 5/16 in. pile thickness for superior durability and density. The water-resistant layer made of latex helps keep your OEM carpets protected from all the nasty spills, keeping it dry and maintaining its pristine condition for a long time. The rubber TractionBac backing keeps the mats in place and prevents sliding while working as an effective moisture barrier. C8 Corvette Lloyd Ultimat Floor Mats are designed using computer driven cutting processes in order to achieve the most precise fit. They follow all the contours of your vehicle’s footwell like a second skin for maximum protection against all the dirt, liquids, and other elements that can damage your OEM carpets. They are offered in factory matching colors to complement your vehicle and style preference. With the embroidered single Corvette logo, these mats will seamlessly match your interiors and upgrade the overall look.

They install easily using Lloyd anchors or factory compatible anchors. C8 Corvette Lloyd Ultimat Floor Mats are 100% designed and manufactured in the USA using all-American made materials. They are backed by a limited 5-year warranty against defects in materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Luxe Floor Mats

The C8 Corvette Lloyd Mats Double Logo Luxe floor mats are the most luxurious carpets made specifically for your C8. Made using the plushest carpet material and designed with cutting edge Computer Design technology, these carpet floor liners will offer pure driving pleasure while giving you the best floor protection. No other mats will feel and look better than the Lloyd Luxe, don’t settle for anything less.

C8 Corvette Luxe Floor Mats are constructed are three times heavier and thicker than regular carpet floor liners. This top of the line carpets are made from premium 48 oz per yard continuous filament nylon yarn with ½ in. pile depth. They are so deep and plush, your feet can sink in and feel the de-“luxe” comfort. You might start driving bare feet from now on. C8 Corvette Lloyd Mats Double Logo Luxe carpet mats have waterproof lining to protect your factory flooring from nasty spills, keeping it pristine and dry. The carpets are treated with Scotchguard protection for maximum resistance against soiling and fading for the long-lasting protection and great looks. It features the patented TractionBac underside to securely attach them to the OEM carpet and keep them in place. They are available in eleven different colors to match your vehicle interior or your style preference. The hand beveled edges adds a smooth finish and the embroidered double logo adds the best customized look.

Your C8 Corvette Luxe Floor Mats are precision crafted using the latest CAD technology and digital cutting process for the perfect fit. They are designed specifically to the exact measurements of your Corvette’s footwell for the complete coverage of the OEM carpet. These luxury liners are easily installed using factory anchor points or slip free hooks. All 2020 C8 Corvette Floor Mats by Lloyd Mats are designed and manufactured in the USA and comes  with a limited lifetime warranty.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Lloyd Mats Floor Mats

The most luxurious vehicle in GM’s line up deserves the most luxurious carpet from Lloyd Mats. The C8 Corvette Lloyd Mats Luxe Single Logo carpets offer more comfort, style, and coverage than standard floor liners.

The luxurious touch of the C8 Corvette Lloyd Mats Luxe Single Logo Floor Mats begins from the carpet. Crafted from only the heaviest, thickest, and the plushest yarn, these deluxe Lloyd carpet are three times thicker than regular floor mats. This 48 oz per yard carpet features half an inch depth profile giving your feet can feel the premium comfort and plush difference. These C8 Corvette Lloyd Mats Floor Mats are built to last with its heavy duty, multiple layered construction. The luxurious yarn is first twisted then heat-set in a two-ply finish for maximum crush resistance. The next layer is a woven propylene coating to add more cushioning and lining. It is then treated with total Scotchguard protection to ensure that your luxury carpet will effectively block stains and dirt for long-lasting, stylish looks. The Lloyd Luxe Carpet is water-resistant, preventing fluid spills to reach your Corvette’s factory carpets. The TractionBac on the underside securely attaches the mat to prevent shifting and sliding around. The hand-beveled edges give a beautiful finish and the embroidered Corvette logo adds the best customized style. The Lloyd Luxe liners are available in eleven colors to choose from.

The C8 Corvette Lloyd Mats Floor Mats are designed using the latest in Computer Assisted Design technology and utilized digital measurements for the perfect fit. They are custom crafted to precisely follow the contour of your vehicle’s footwell for the complete protection. They are designed to be compatible with factory anchor points or the Lloyd Mat slip-free hooks. All C8 Corvette Lloyd Mats Floor Liners are backed by a lifetime warranty against defects in materials and craftsmanship.

Free Shipping

Fitment: C8 Stingray Coupe (2020 and 2021)

Product Note: Sold as a Pair

C8 Corvette Weathertech Trunk Mats

Weathertech combined cutting edge design and all-weather protection for the C8 Corvette with their DigitalFit Floor Liners. With the goal of developing the best floor protection against all the elements, the brilliant designers and engineers at Weathertech utilized only premium materials and the most advanced Computer Aided Design technology. The C8 Corvette WeatherTech Cargo Mats is made tough to offer unbeatable defense against all the filth, fluids, and other elements throughout all the seasons of the year.

It’s called DigitalFit for a reason. Weathertech utilized digital laser measurements to ensure that the DigitalFit Trunk Mats will cover the entire cargo area of the 2020 Chevrolet Corvette from the front, back, and the sides for the absolute interior protection and consistent fit. C8 Corvette Trunk Mats feature a raised lip tray design that work great in trapping dirt, mud, and fluid within the mats to protect the carpeted flooring. It has a lower reservoir with deep, sculpted channels that minimize movement of fluid when driving to prevent spills. These fluids are easily removed over the door sill. C8 Corvette WeatherTech Cargo Mats are made from High-Density Tri-Extruded material for solid core strength, surface friction for secure attachment to the carpet, and smooth tactile feel on the surface. These mats will not melt during summer heat waves and will not crack when it gets to freezing temperatures in the winter. Keeping them clean is very easy! When it’s time for cleaning, just remove the liners, hose them off and done. C8 Corvette Trunk Mats come in three different colors to match your style, part number 4416221 in black, 4516221 in tan, and 4616221 in grey.

Weathertech is a company that never believed in outsourcing. That is why the C8 Corvette Weathertech DigitalFit Cargo Liners are 100% designed and manufactured in the USA using entirely American-made materials. All Weathertech DigitalFit Floor Mats are backed by a limited lifetime warranty against defects in materials and craftsmanship.

Fitment: C8 Corvette 2020 to current

C8 Corvette Weathertech Floor Liners

Get the most advanced, all-weather floor protection for your C8 Corvette Stingray with a new set of Weathertech Digital Fit Floor Mats. The expert engineers and talented designers at Weathertech developed the Digital fit C8 Corvette Weathertech Floor Mats to guarantee the absolute best in interior protection and fitment. Using cutting edge design technology and premium quality material, they offer complete coverage and all-weather defense from all the grimes, liquids, pets, and practically all the elements that can damage your interior carpet flooring.

The C8 Corvette Wethertech Floor Liners are the most precise fitting floor mats on the market today. Each set is laser measured and digitally patterned for the exact measurements of your C8 Corvette Stingray. Manufactured with patented High Density Tri-Extruded (HDTE) material that offers solid core strength against all harmful elements that gets in the car from your shoes, pets, and cargo. This robust material will not melt in extreme heat or crack in freezing temperatures, the C8 Corvette Wethertech Floor Liners are truly made to last. It features the most advanced low-profile, tray-style design that works great in redirecting liquids into reservoir channels so they don’t escape into the carpet while still offering a steady grip when getting in and out of the vehicle. The trapped liquids and filth can be easily removed from the liners over the door sill. For all the leftover dirt, just remove the liners, hose them off and done! No fuss! The C8 Corvette Weathertech DigitalFit Floor Mats features well-built friction surface that securely grips into the flooring and a textured finish for a great tactile feel on the surface.

C8 Corvette Weathertech Floor Mats come in classic Black 4416221, Tan 4516221 and Grey 4616221. All Weatherthech Digital Flit Floor Liners are proudly designed and manufactured in the USA using all-American made materials. They are backed by a limited lifetime warranty against any defects in materials and craftsmanship.

Fitment: C8 Stingray (2020 to Current) 

Product Note: Sold as a Pair, Drivers and Passenger Sides 

C8 Corvette Cat Heat Shield

Protect all the sensitive and operational parts in your engine bay with this C8 Corvette Kooks Catalytic Converter Heat Shield. Keeps the heat in the cats and prohibits excessive heat soak from affecting performance. This Kooks C8 Corvette Catalytic Converter Heat Shield is designed and engineered to be a perfect fit and last a life time. Sold as a Pair (2)

Free Shipping

Fitment: 2020 C8 Corvette Stingray

Product Note: Does not include Catalytic Converters

C8 Corvette Headers

The best quality headers in the market for the C8 Corvette are made by no other than American Racing Headers. The legendary performance of ARH Headers comes from 100% Stainless Steel construction, 100% American made, and 100% fabricated by expert racers.

C8 Corvette American Racing Headers are crafted using only premium aircraft grade T304 stainless steel that offers long-lasting durability and superior performance. Designed with 3/8 in. laser cut flanges and hand ported TIG welded inlets, they deliver a leak-proof and warp-free seal. It has a distinctive design with optimized tubing size and routing that significantly boosts horsepower and torque across the entire RPM range. This kit has been dyno-tested to deliver up to additional 33 horsepower and 37 ft-lbs. of torque. C8 Corvette Headers come standard with merge collectors with welded scavenger spikes to improve efficiency and exhaust velocity. C8 Corvette ARH Long Tube Headers have optimized 1-7/8 in. or 2 in. primary tube diameter and 3 in. collector diameter. Designed specifically for the C8 Corvette, they are crafted for the perfect fit.

ARH never believed in outsourcing and believes that products labeled as “made in the USA” meant unbeatable quality. C8 Corvette American Racing Headers are made of materials that are made in the United States and have gone through rigorous testing standards. ARH systems are proudly designed and manufactured in their Long Island, New York, USA facility. The design and fabrication team at ARH has more than 40 years of experience in making and racing high performance headers. These expert racers take making horsepower a serious business as they participate in racing competitions, and winning championships after championships.

This system by ARH is supplied with gaskets and hardware for a complete installation. They are designed to bolt on to your factory exhaust, some modifications may be required. Stingray C8 Corvette Headers are intended for off-road use only and is not legal for sale or use in California. All ARH systems are backed by a lifetime warranty.

Free Shipping

Fitment: C8 Corvette Stingray (2020 to Current)