Corvette Parts and Accessories

C7 Corvette GS Creations Rear Marker Reflector

GS Creations Rear Marker Lenses - C7 Corvette. Add a refined look to your C7 Corvette with these Reverse Marker Lenses. Offered in your choice of Clear or Smoked, these Stingray Rear Marker Lenses will be sure to please even the most discriminating Corvette Owner. 

Fitment: C7 Corvette Stingray, Grand Sport, Z06 and ZR1 (2014 - 2019)

Product Note: Check your local regulations

C7 Corvette Tail Light Black Out Kit

GS Creations Tail Light Black Out - C7 Corvette. Add that flush look to the Back of your Stingray, Grand Sport and Z06 with this Taillight Blackout kit for the C7 Corvette. Manufactured from 1/8" Tinted Acrylic, this kit includes everything you will need to install in minutes. Installs with Clear 3M Automotive Grade Tape.

Fitment: C7 Corvette Stingray, Grand Sport and Z06 (2014 - Current)

Product Note: Check your local regulations

C7 Corvette GS Creations Smoked Marker Lights

GS Creations Marker Lenses - Combo - C7 Corvette. Add a refined look to your C7 Corvette with these Marker Lights and Lenses. Offered in your choice of Clear or Smoked, these Stingray Marker Lenses will be sure to please even the most discriminating Corvette Owner. 

Included: (2) Front Turn Signal Marker Lights - (2) Rear Side Marker Lights - (2) Rear Bumber Lenses 

Fitment: C7 Corvette Stingray and Z06 (2014 - Current)

Product Note: Check your local regulations

C7 Corvette GS Creations Smoked Front Marker Lights

GS Creations Front Marker Lights - C7 Corvette. Add a refined look to your C7 Corvette with these Front Marker Lights. Offered in your choice of Clear or Smoked, these Stingray Turn Signal Lights will be sure to please even the most discriminating Corvette Owner. These Front Marker Lights are a FULL Replacement part, not just a film or spray tined OEM Lens. Each kit includes a right and left Front Marker with Amber LEDs. 

Fitment: C7 Corvette Stingray and Z06 (2014 - Current)

Product Note: Check your local regulations

C6 Corvette GS Creations Front Marker Lights

GS Creations Front Fender Clear Marker Lights - C6 Corvette. Make your C6 Corvette stand out with these Front Clear Corner Marker Lights. Get rid of your Corvettes Amber Rear Marker Lights with these OEM quality clear replacements. Rear Marker Lights Install in minutes with basic hand tools. Re-use your existing bulbs or upgrade to LED replacements offered in White, Hyper-White, Green, Amber, Red, Blue or Black Light.

Fitment: C6 Corvette, Grand Sport, Z06 and ZR1 (2005 - 2013)

C8 Corvette Tail Light Blackout 

C8 Corvette GS Creations Molded Tail Light Covers are the professional way to bring the Black Out Tint look to the rear of your C8 Corvette. These Premium Molded Tail Light Smoked Covers (Blackouts) complete the look of your Stingray.

This is a 4-piece kit including one driver and passenger side tail light covers in a polycarbonate Lexan transparent smoked blackout look. The smoked color is built into the Lexan so no worries about paint fade, peeling or chipping over the years. We also include the side tail light reflector overlays in a 12 mils thick adhesive-backed Lamin-X film.

Do not be concerned with safety and visibility with these C8 Corvette GS Creations Molded Tail Light Covers. When headlights shine at your tail lights all 3 reflectors (per light) still will reflect, also when you use your Parking/ Brake/ Turn signal/ Reverse lights they are still highly visible. We have been using this level of smoke on all of our lights since the C5 Corvette and will give your C8 Corvette Tail Light the Black Out look and appearance you will appreciate while maintaining visibility.

The material used in manufacturing is a clear upgrade over previously used Acrylic which is a huge benefit to you as they will not break if dropped during installation or if you decide to remove them later. As for installation, with only 4 pieces total it will take you under 2 minutes. Each C8 Corvette tail light black out cover will come with pre-installed clear 3m tape. You simply clean your lights with the supplied alcohol, and let dry. You do not need to remove your rear bumper to install these covers.

Fitment: C8 Corvette Stingray 2020 and 2021 Coupe and Convertible 

Product Note: Check your local regulations

Product Note: If your vehicle was ever waxed or ceramic coated most likely so was the area you are installing this product on even if it's a light or reflector. You MUST remove any wax or ceramic coating before you install this product or the 3m tape used will not stick. Alcohol alone will not do this, please consult with your detailer to find the best way to remove. You should test the area before install by putting any tape on the light and if there is good adhesion you should be ok. If the tape you used for the test does not stick or comes off very easy so will our covers

C7 Corvette GS Creations Smoked Rear Marker Lights

GS Creations Front Marker Lights - C7 Corvette. Add a refined look to your C7 Corvette with these Rear Marker Lights. Offered in your choice of Clear or Smoked, these Corvette Rear Fender Lights will be sure to please even the most discriminating Corvette Owner. These Rear Marker Lights are a FULL Replacement part, not just a film or spray tined OEM Lens. Each kit includes a right and left Front Marker with Red LEDs. 

Fitment: C7 Corvette Stingray and Z06 (2014 - Current)

Product Note: Check your local regulations

C6 Corvette GS Creations Rear Marker Lights

GS Creations Rear Fender Clear Marker Lights - C6 Corvette. Make your C6 Corvette stand out with these Rear Clear Corner Marker Lights. Get rid of your Corvettes Amber Rear Marker Lights with these OEM quality clear replacements. Rear Marker Lights Intall in minutes with basic hand tools. Re-use your existing bulbs or upgrade to LED replacements offered in White, Hyper-White, Green, Amber, Red, Blue or Black Light.

Fitment: C6 Corvette, Grand Sport, Z06 and ZR1 (2005 - 2013)

C8 Corvette Smoked Tail Light Kit 

C8 Corvette GS Creations Tail Light Blackout Kit is a simple and cost-effective way to add a smoked tail light tint cover over your Rear Tail Light Reflector/ Brake/ Reverse light / Turn Signal. you use your brake, reverse lights or turn signals they are still highly visible through the blackout covers. We have been using this level of smoke on all of our kits since the C5 Corvette!

With this kit, you will receive 10 lens covers, 5 per side, that will cover only the red reflectors, clear reverse and brake/turn signal light areas of your Corvette rear tail lights. Each C8 Corvette Stingray Smoked Tail Light Kit has been meticulously CAD designed, then precisely shaped using the latest laser technology. Installation will be a breeze. Each piece will be entirely covered with clear 3m double sided tape. All you will need to do is peel off the tape backing, line up and press on.

Installation is so easy a caveman could do it, with no disrespect meant to the caveman.  When you receive the C8 Corvette GS Creations Tail Light Blackout Kit, Simply clean the factory light with alcohol, remove the protective front covering, then tape backing and press each piece into place. Great news for you, they are not a flimsy film but yet a hard rigid smoked lens so you will not have to fuss with getting air bubbles, and lining them up straight will be a piece of cake.

The Stingray name returned in 2014 to the Corvette with the C7 and your 2020 + C8 Corvette Stingray Smoke Tail Light kit will present a great view to those trying to follow in your footsteps as you pull away in the express lane leaving them a nice view or your tail light modification in your late model Corvette.  

Fitment: C8 Corvette Stingray 2020 and 2021 Coupe and Convertible 

Product Note: Check your local regulations