C7 Corvette AMT Motorsport 1/4 inch wheel spacer mounting surface close up for fitment verification
C7 Corvette AMT Motorsport 1/4 wheel spacer hub face and center bore close up

C7 Corvette AMT Motorsport 1/4 inch Wheel Spacers (2014-2019)

265025

Regular price$135.00
/
Shipping calculated at checkout.
In stock - Ships in 1–2 business days

AMT Motorsport 1/4-Inch Wheel Spacers for C7 Corvette

The AMT Motorsport 1/4-Inch Wheel Spacers, part number 265025, fit 2014–2019 C7 Corvette Stingray, Grand Sport, Z06, and ZR1 models with the LT1 6.2L, LT4 6.2L supercharged, or LT5 6.2L supercharged engine. Sold as a pair, these precision-machined 6061-T6 aluminum spacers move the installed wheels outward by 1/4 inch, or 6.35mm, to help fine-tune wheel clearance and create a more flush stance when matched to the Corvette’s exact wheel offset, tire size, ride height, and alignment.

Product Details

  • Brand: AMT Motorsport
  • Part Number: 265025
  • Product: 1/4-Inch Wheel Spacers
  • Vehicle: 2014–2019 C7 Corvette
  • Quantity: Sold as a pair
  • Spacer Thickness: 1/4 inch
  • Metric Thickness: 6.35mm
  • Material: 6061-T6 aluminum
  • Manufacturing: CNC turned and milled
  • Runout: Less than 0.0005 inch
  • Finish: Black anodized
  • Design: Precision stud holes with milled weight-reduction pockets
  • Installation Position: Front or rear when verified for the wheel and tire setup
  • Warranty: AMT Motorsport lifetime guarantee

Benefits

  • Moves each installed C7 Corvette wheel outward by 1/4 inch or 6.35mm
  • Helps create a more flush wheel position without using a substantially thicker spacer
  • Can provide additional wheel-side clearance when confirmed by proper measurement
  • Slightly widens the Corvette’s track width on the axle where installed
  • Uses precision-machined aluminum construction for consistent wheel mounting
  • Includes milled pockets that reduce unnecessary spacer weight
  • Black anodizing helps protect the aluminum from corrosion and road exposure

Important Notes

  • Wheel-spacer fitment must be verified using the exact wheel offset, tire size, ride height, brake package, and alignment settings.
  • AMT Motorsport describes 1/4 inch as approximately the maximum spacer thickness normally used with stock wheel studs.
  • Confirm safe lug-nut thread engagement before driving. Longer wheel studs may be required for some wheel and lug-nut combinations.
  • Check front steering clearance at full lock and front and rear clearance under suspension compression.
  • Clean the wheel hub, spacer, and wheel mounting surfaces before installation.
  • Tighten the lug nuts in the correct sequence using the Corvette’s specified torque and recheck them after the initial driving period.
  • The spacers are sold as a pair. Order two pairs when installing spacers on all four wheels.

CORVETTE COMPATIBILITY

  • Generation: C7 Corvette
  • Model Years: 2014–2019
  • Models: Stingray, Grand Sport, Z06, and ZR1
  • Engines: LT1 6.2L, LT4 6.2L Supercharged, and LT5 6.2L Supercharged
  • Body Styles: Coupe and Convertible
  • Transmissions: Manual and Automatic
  • Installation Position: Front or rear when confirmed for the wheel and tire configuration

Use Overview

The AMT Motorsport 1/4-Inch Wheel Spacers are intended for C7 Corvette owners who need a small, measured change in wheel position. The 6.35mm thickness can help fine-tune a wheel and tire package, move the wheel face closer to the fender line, or create limited additional clearance for a specific component. Because C7 Corvette wheel offsets, tire widths, ride heights, brake packages, and alignment settings vary, every installation should be measured and checked before the car is driven aggressively.

What Corvette Customers Say

A CCA customer using these AMT Motorsport wheel spacers on a C7 Corvette Z51 praised the product quality, fitment, and fast shipping. The feedback supports the spacers as a straightforward option for Corvette owners seeking a modest outward wheel-position adjustment.

Why Buy These AMT Motorsport C7 Corvette Wheel Spacers?

AMT Motorsport manufactures these spacers from 6061-T6 aluminum using precision CNC turning and milling. Tight stud-hole tolerances, less than 0.0005-inch runout, weight-reduction pockets, a corrosion-resistant black anodized finish, and a lifetime guarantee make part number 265025 a purpose-built option for C7 Corvette owners who want a carefully measured 1/4-inch wheel-position change.

✅ In-stock items ship within 24–48 hours via Standard Ground.

✅ Free shipping items are available in the Continental US only.

✅ Custom quotes available for 2-Day, Next Day, or Saturday delivery.

✅ Custom or backordered items ship as soon as available.

View our full shipping policy →

Vehicle Fitment & Specifications

Generation: C7
Trim Level: Stingray, Grand Sport, Z06, ZR1
Engine Code: LT1, LT4, LT5
Transmission Type: Manual, Automatic
Intended Use: Street, Track

Frequently Asked Questions

The AMT Motorsport 265025 wheel spacers are 1/4 inch thick, equal to 6.35mm. Each spacer moves the installed C7 Corvette wheel outward by 6.35mm.
The AMT Motorsport 265025 wheel spacers are sold as a pair. One pair can be installed on the front or rear axle after verifying wheel, tire, and body clearance.
1/4 inch as approximately the maximum spacer thickness normally used with factory studs. Safe lug-nut thread engagement must still be confirmed for the exact C7 Corvette wheel and lug-nut combination before driving.
Yes. The spacers move each installed wheel outward by 1/4 inch, which can create a more flush stance. Final appearance and clearance depend on the C7 Corvette’s wheel offset, tire width, ride height, and alignment.
Yes. The spacers can be used on the front or rear when the wheel and tire package provides adequate clearance. Check front steering-lock clearance and rear suspension-compression clearance before aggressive driving.

Recently viewed