aFe POWER 46-39117 92mm throttle body for C6 Corvette Z06 LS7, showing the aluminum housing, throttle blade and factory mounting flange
Front view of the aFe POWER 46-39117 throttle body for C6 Corvette Z06 LS7, showing the round bore, blade and four mounting holes
Angled view of the aFe POWER 46-39117 throttle body for C6 Corvette Z06 LS7, showing the electronic housing and plug-in connector
Side profile of the aFe POWER 46-39117 92mm throttle body for C6 Corvette Z06 LS7, showing the cast housing and machined inlet lip
Bore comparison for the C6 Corvette Z06 LS7 aFe POWER throttle body, with the factory 90mm opening beside the larger 92mm opening

C6 Corvette Z06 LS7 aFe POWER 92mm Throttle Body (2009–2013)

46-39117

Regular price $518.75 Sale price$415.00 Save $103.75
/
Shipping calculated at checkout.
In stock - Ships in 1–2 business days

aFe POWER 92mm Throttle Body for C6 Corvette Z06 LS7 (2009–2013)

The aFe POWER 92mm Throttle Body, part number 46-39117, gives your 2009–2013 C6 Corvette Z06 with the 7.0L LS7 V8 a larger throttle opening while retaining factory mounting points and plug-in electronics. It is a direct bolt-on upgrade for the naturally aspirated Z06, with no tune required for the throttle body itself.

The 92mm bore replaces the stock 90mm opening, increasing airflow potential without turning the installation into an intake-manifold conversion. A cast-aluminum housing surrounds the electronic throttle assembly. For an LS7 owner planning intake or exhaust upgrades, it offers a larger opening while keeping the familiar factory connection and mounting layout.

Product Details

  • Manufacturer part number: 46-39117
  • Bore diameter: 92mm throttle bore
  • Construction: Cast-aluminum housing
  • Electronics: Electronic drive-by-wire operation with plug-in connection
  • Mounting: Uses factory mounting locations and the four original mounting screws
  • Package: Sold individually: one complete throttle body
  • Not included: Gasket, new mounting hardware, air filter, intake coupler and complete intake system
  • Warranty: One-year aFe POWER limited warranty against defects in materials and workmanship; eligibility and exclusions apply

Benefits

  • Airflow potential: Larger bore gives the LS7 more airflow potential than the stock 90mm opening
  • Straightforward swap: Factory mounting and electrical connections simplify the component swap
  • No tune required: No custom calibration is required for this throttle-body upgrade alone
  • Focused upgrade: Upgrade your 2009–2013 Z06 without replacing the entire intake system

Important Notes

  • Fitment: Fits the 2009–2013 Corvette Z06 7.0L LS7.
  • California restriction: Not CARB exempt. Unavailable for purchase in California or use on a vehicle registered with the California DMV.
  • Installation preparation: Inspect the existing intake-manifold gasket and replace it if needed. Reuse the four factory screws, tighten them to 10 Nm (89 in-lb), and follow the complete installation instructions.
  • Installation safety: Disconnect the negative battery terminal before installation. Recheck screws, clamps and connectors after 100–200 miles.

CORVETTE COMPATIBILITY

  • Model: C6 Corvette Z06
  • Model years: 2009–2013
  • Engine: 7.0L LS7 V8
  • Body style: Coupe
  • Transmission: Manual

Why Buy from Custom Corvette Accessories

Choose your aFe POWER 92mm Throttle Body (SKU 46-39117) for the 2009–2013 C6 Corvette Z06 LS7 with one-on-one help from fellow Corvette owners. Custom Corvette Accessories has served the Corvette community since 2005, giving you a direct contact for product and order questions.

✅ In-stock items ship in 1–2 business days via Standard Ground.

✅ Free shipping items are available in the Continental US only.

✅ Custom quotes available for 2-Day, Next Day, or Saturday delivery.

✅ Custom or backordered items ship as soon as available.

View our full shipping policy →

Vehicle Fitment & Specifications

Generation: C6
Trim Level: Z06
Engine Code: LS7
Transmission Type: Manual
Intended Use: Street

Shipping Information

Boxed Weight: 4.1 lbs
Box Size: 12 x 6.2 x 6.2 in

Frequently Asked Questions

Choose the aFe 46-39117 for factory-mount fitment on your 2009–2013 Corvette Z06. A larger bore alone does not make another throttle body a better match for your LS7. Compare its manifold, intake and calibration requirements before choosing.
Don't count on a fixed horsepower increase for your Corvette Z06. aFe's advertised gain is not a promise for your LS7. Choose the 46-39117 for its fit and role in your complete engine combination, not a guaranteed horsepower number.
Check your exact manifold before ordering the aFe 46-39117 for your Corvette Z06. Do not assume factory-mount fitment carries over to an aftermarket manifold. Ask your manifold manufacturer or installer to confirm the mounting flange, inlet connection and electronics.
The seller's aFe warranty does not transfer to you. aFe limits its warranty to the original purchaser and requires proof of purchase. Consider that difference when comparing a used throttle body with a new purchase.
Yes. Keep your original Corvette Z06 throttle body for future use, but reuse its four mounting screws to install the aFe 92mm unit rather than storing them with the old one.

Recently viewed