C5 Corvette Parts and Accessories

C5 Corvette Cold Air Intake K&N 57-3020

Upgrading to a new K&N FIPK Series Cold Air Intake is one of the best decisions you will ever make to achieve more horsepower and peak engine performance. Designed using a dynamometer and rigorously tested by racers, installing the FIPK (Fuel Injection Performance Kit) can instantly guarantee up to 10% more horsepower to your Vette. Additionally, your C5 Corvette LS1 and LS6 gets maximum engine protection against particles from the best air filter in the world, the K&N air filter. Designed to replace your vehicle’s factory air intake system and all its power-robbing air flow restrictions, the FIPK or 57 Series C5 Corvette K&N Intake will deliver more horsepower and torque throughout the RPM range.

The intake tube and the air filter combination in the 57 Series C5 Corvette Cold Air Intake will make your engine gulp more, cooler, and cleaner air. The enormous Filtercharger air filter has oiled, multiple cotton gauze filter media allows more air to flow through while absorbing all dirt particles to prevent internal engine damage. The K&N air filter in part number 57-3020 is washable and reusable, it can go up to 100,000 miles under normal driving conditions before needing filter services. The K&N 57 Series Cold Air Intake uses a rotationally molded HDPE (High Density Polyethylene) tube that increases and cools air flow better than metal tubes. K&N Cold Air Intake for C5 Corvette comes with a custom heat shield to protect the air filter from the heat in the engine bay.

K&N 57-3020 C5 Corvette Cold Air Intake is supplied with stainless steel clamps, couplers, and installation instructions for a complete DIY installation in less than 90 minutes. It is backed by K&N’s 10-year/million-mile warranty or basically for the entire life of your vehicle. The C5 Corvette K&N Intake is CARB exempt and is legal for use in all 50 states.

Free Shipping

Fitment: C5 Corvette (1997 - 2000)

Product Note: Street Legal in all 50 States (Including California)8

C5 Corvette 63-1050 K&N Cold Air Intake

63-1050 K&N Intake System - C5 Corvette. The K&N 63 Series Intake kits for C5 Corvettes are truly state-of-the-art. K&N starts with the largest conical shaped High-Flow air filter we can fit into the  engine compartment while using factory holes and  mounting  points. This extra filter size provides even more airflow at lower restriction than a standard  K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). The filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next we attach the filter to a rotatary molded tube  made from interlaced High Density Polyethylene. This process  allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of our tubes have unique  shapes or indentations that are specifically engineered for each Corvette application. Finally the tube is connected to  the engine with adapters made from high strength materials such as silicon and  reinforced nylon and ensures long life. Put all this together and you have the best Corvette C5 high-flow intake system available today. C5 Corvette K&N 63-1050

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California. 

C5 Corvette K&N Air Filter 33-2111

K&N Replacement Air Filter - C5 Corvette. Designed and Engineered specifically for the C5 Corvette this K&N Air Filter will improve air flow, boost horsepower and rate of acceleration. Washable and re-usable, this C5 Corvette K&N Air Filter is backed by their Million Mile Warranty. 33-2111

Fitment: C5 Corvette (1997 - 2004)

C5 Corvette K&N Intake 57-3035

57-3035 K&N Intake - C5 Corvette. The 57 Series Generation II C5 Corvette air intake, also referred to as an FIPK, is K&N's ultimate performance product. This Corvette performance intake is designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with a Million Mile Limited Warranty. K&N air intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This translates into more power and torque for your vehicle. The filters on these kits are washable and reusable. Simply wash with mild soap and water, rinse, let dry and lightly re-oil.
K&N Engineering is based in Riverside California in a sprawling 400,000 square foot facility that boast some of the world most advanced flow testing and design equipment, giving you the peace of mind that comes with a world renowned company that has proven themselves in the lab, on the street and the race track. The 57 Series K&N C5 Corvette Cold Air Intakes are California CARB Certified. That means that the K&N Intake 57-3035 is street legal in the state of California and comes with a CARB Sticker for hassle free use anywhere in the Country. This C5 Corvette K&N Intakes was specifically designed for the 2001, 2002, 2003 C5 Corvette and can be installed with basic hand tools and limited mechanical knowledge. Each Cold Air Intake from K&N for the C5 Corvette comes with a complete set of instructions and all necessary hardware for installation. 

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: For model years (1997 to 2000) use part number 57-3020

Product Note: Street Legal in all 50 States (Including California) CARB EO Number D-269-28