Corvette Parts and Accessories

Halltech C8 Corvette Intake System

C8 Corvette Halltech Hornet Intake - HRNT.518 is the Intake you are looking for to add dyno proven horsepower and torque to your Corvette Stingray. Founded in a garage in 1999 on the West Coast, they quickly moved passed very humble beginnings and became an industry expert in Cold Air Intake Systems for the modern Corvettes. They are now ready to introduce the much-awaited Halltech C8 Corvette Intake System.

This is a direct CAI replacement so you can make this performance enhancing modification without the need for an engine tuning after you complete the upgrade.  Dyno testing has resulted in 17+ increase in horsepower to go along with 25+ increase in torque. This is done with the best in C8 Air Filter design that will add over 1000 square inches of air filtration, thus allowing your C8 Stingray to breath in a healthy amount of air for maximum performance. The C8 Halltech Hornet Intake System is purposely designed with molded-in velocity stack and reverse flow partition to ensure laminar flow at the MAF sensor to correctly determine the amount of airflow to the engine.

Halltech C8 Corvette Intake System is engineered and designed for the coupe and Hard Top Convertible. So this model will not fit the hard top convertible without slight modifications to the cover under the trunk carpet and the actual lid partition may be slightly different (ramp vs funnel) on production units. The use of a stainless steel backplate will ensure that all harness fasteners are attached in their factory locations.  Keep in mind with installation you will need to reuse your stock connector hoses, pcv fitting, inlet ducts and mounting bolts.

It's not a proper Corvette until it's a Halltech Corvette.

Free Shipping

Fitment: C8 Corvette (2020, 2021, 2022, 2023, 2024) Coupe and HTC

Fitment: (the only modification required for the HTC is to simply drill-out the top center rivnut on the access panel)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Z06 Halltech Stinger RAZ

Halltech Stinger-RAZ Cold Air Intake with Traditional K&N Red Filter or the Agapostemon Bee Filter - C7 Corvette Z06 RAM Air Induction System is the perfect intake for your LT4 C7 Corvette Z06. This Intake is True RAM Air and includes Halltech's TRIC Air Induction System and Nomex Sock. Fully Rotomolded and Tapered, the Intake includes the High Flow Red Filter or an option for the Agapostemon Filter. You can expect up to 50-55 Rear Wheel Horsepower. Give your Z06 Corvette a breath of fresh air with the Halltech Stinger-RAZ Cold Air Intake. This Intake System can not be used in ANY TYPE of wet conditions, including rain, wet streets and car washes. STRAZ

Free Shipping

Fitment: C7 Corvette Z06 (2015 - 2019)

Product Note: This Halltech RAM Air Intake can not be used in ANY TYPE of wet conditions, including rain, wet streets and car washes.

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Z06 Halltech Stinger RZ 

Halltech Stinger-RZ Cold Air Intake with traditional Red K&N Filter or High Flow Green Agapostemon Bee Filter - C7 Corvette Z06 Cold Air Induction System is the perfect intake for your LT4 C7 Corvette Z06. This Intake is a True Cold Air and is a straight Bolt on application. The Stinger-RZ requires no tuning. Fully Rotomolded and Tapered, the Intake includes the High Flow K&N Red Filter. You can expect up to 40-55 Rear Wheel Horsepower. Give your Z06 Corvette a breath of fresh air with the Halltech Stinger-RZ Cold Air Intake.

You will be able to tell the impact as soon as you bolt on the Halltech Stinger RZ, but seat of the pants feel does not replace cold hard testing. Over 20 reputable speed shops have tested this Halltech RZ Intake for the C7 Corvette Z06 and all come to the same conclusion. This system delivers as promised. Based in Ixonia Wisconsin, Halltech features in house design and engineering and have been known for quality and performance since 1999. The proof is in the pudding and you can see the improvement on many Dyno Graphs and Time Slips posted all over the internet. No matter what else you have going on with your Vette, the C7 Corvette Z06 Halltech Stinger RZ with the Red K&N Filter or Agapostemon Bee Filter is a proven winner.

Free Shipping

Fitment: C7 Corvette Z06 (2015, 2016, 2017, 2018, 2019)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Grand Sport Halltech Intake

C7 Corvette Grand Sport LT1 Halltech Intake with Your Choice of traditional Red K&N Filter or the Agapostemon Bee Filter - Ram Air Induction System is the perfect intake for your LT1 C7 Corvette. This Intake is a True Cold Air and is a straight Bolt on application. This Intake does not require a tune. Fully Rotomolded and Tapered, the Intake includes the High Flow Red Bee Filter. You can expect up to 14 Rear Wheel Horsepower and 14 foot pounds of Torque. The Halltech Stinger R will not cause a CEL Check Engine Light and does not require a tune. Give your Grand Sport Corvette a breath of fresh air with the Halltech Cold Air Intake.

Each C7 Corvette Grand Sport LT1 Halltech Intake with the High Flow Agapostemon Bee Filter for the Seventh Generation is manufactured in Ixonia Wisconsin in Halltech's production and manufacturing facility. Made from high quality roto molding and a propriety Filter, the Halltech Stinger R is a proven winner. Boasting 3.6 seconds 0 - 60 miles per hour and 11.3 seconds 0 - 120 miles per hour. The high flow air filter has 50 percent more surface area than the stock filter. The tapered design of the air bridge increase air velocity and has a true bell mouth radius velocity stack for perfect LTFTs. The Air Filter flow bench tested at a whopping 1.5" H2O, making this one of the best lowing filters out there. Installation is simple and can be done in your garage with basic hand tools. When only the best cold air intake will do, then the C7 Corvette Grand Sport Halltech Intake with traditional Red K&N Filter or the Agapostemon Bee Filter is for you. 

Free Shipping

Fitment: C7 Corvette Grand Sport (2017 - 2019)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C7 Corvette Stingray Halltech Intake

C7 Corvette Stingray LT1 Halltech Intake with your choice of traditional Red K&N Filter or the Super High Flow Green Agapostemon Filter - Ram Air Induction System is the perfect intake for your LT1 C7 Corvette. This Intake is a True Cold Air and is a straight Bolt on application. This Intake does not require a tune. Fully Rotomolded and Tapered, the Intake includes the High Flow K&N Filter. You can expect up to 14 Rear Wheel Horsepower and 14 foot pounds of Torque. The Halltech Stinger R will not cause a CEL Check Engine Light and does not require a tune. Give your Stingray Corvette a breath of fresh air with the Halltech Cold Air Intake.

Each C7 Corvette Stingray LT1 Halltech Intake with traditional Red K&N Filter or Agapostemon Bee Filter for the  Seventh Generation is manufactured in Ixonia Wisconsin in Halltech's production and manufacturing facility. Made from high quality roto molding and a propriety Filter, the Halltech Stinger R is a proven winner. Boasting 3.6 seconds 0 - 60 miles per hour and 11.3 seconds 0 - 120 miles per hour. The high flow air filter has 50 percent more surface area than the stock filter. The tapered design of the air bridge increase air velocity and has a true bell mouth radius velocity stack for perfect LTFTs. The Air Filter flow bench tested at a whopping 1.5" H2O, making this one of the best lowing filters out there. Installation is simple and can be done in your garage with basic hand tools. When only the best cold air intake will do, then the C7 Corvette Stingray Halltech Intake with Red K&N Filter or Agapostemon Bee Filter is for you. 

Free Shipping

Fitment: C7 Corvette Stingray (2014 - 2019)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C6 Corvette Halltech Killer Bee MF108

Halltech Killer Bee MF108 C6 Corvette Ram Air Induction System is the perfect intake for your LS3 and LS7 C6 Corvette. The MF108 requires no aftermarket tune and improved idle manners due to the forward design of the Mass Air Flow Sensor and velocity stack. The new design features roto-molded cross link polyethylene plastic, making it one of the strongest and most durable intakes you can buy. When you are talking Cold Air Intakes, size matters and the C6 Corvette Killer Bee does not disappoint. The Killer Bee is 108mm at the MAF entrance and exit, but comes with a reduction connector for stock applications. Full RAM Air requires cutting the radiator shroud, making this one of the best Corvette Performance Parts you can bolt on. Take a look at the dyno chart below for real world horsepower and torque numbers. Includes Killer Bee "Beehive" Engine Shroud. KBFM108

Free Shipping

Fitment: C6 Corvette, Corvette Grand Sport and Z06 (2006 - 2013)

Product Note: Requires and aftermarket Tune

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Halltech Venom V2024

Halltech Venom Cold Air Intake - C5 Corvette. The Venom is cut from the cloth of the all new Killer Bee II Z06 Cold Air Induction System this second generation intake flows more air than any induction system on the market.  It utilizes the stock Mass Air Flow sensor for easy installation and seamless smooth response on the street or at the track. Starting with the Killer Bee II 15" wide Halltech filter with a built in velocity stack flange, the actual changes to our mold design have increased flow to the throttle body. The filter is designed by Halltech but made by K&N exclusively for Halltech's Killer Bee II. The bridge is also made from the new KB II mold which dynoed over 15 HP on the Katech Engine Dyno. The filter can be cleaned with the K&N cleaning kit found at all automotive parts stores. Includes Honeycomb air straightener. V2024

The C5 Corvette Halltech Venom Intake is designed and engineered in Halltech's manufacturing and production shop in Ixonia, Wisconsin. Each Halltech C5 Corvette Intake is a straight bolt on application and can be done with basic hand tools in about an hour. Included is a full set of color instructions and every thing you will need to complete the installation. Installing a Halltech Cold Air Intake will not cause a check engine CEL and does not require an aftermarket tune. Give your Corvette a breath of fresh air, improved throttle response, better air flow and gas mileage with the C5 Corvette Halltech Venom Intake System.

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C6 Corvette MF103 Killer Bee Intake System

Halltech Killer Bee MF103 C6 Corvette Ram Air Induction System is the perfect intake for your LS3 and LS7 C6 Corvette. The MF103 requires no aftermarket tune and improved idle manners due to the forward design of the Mass Air Flow Sensor and velocity stack. The new design features roto-molded cross link polyethylene plastic, making it one of the strongest and most durable intakes you can buy. When you are talking Cold Air Intakes, size matters and the C6 Corvette Killer Bee does not disappoint. The Killer Bee is 102.5mm at the MAF entrance and exit, but comes with a reduction connector for stock applications. Full RAM Air requires cutting the radiator shroud, making this one of the best Corvette Performance Parts you can bolt on. The K&N manufactured warhead filter is washable and re-usable. Take a look at the dyno chart below for real world horsepower and torque numbers. Includes Killer Bee "Beehive" Engine Shroud. FM103

Bolt on Horsepower and Torque to your LS3 and LS7 Corvette with the Halltech MF 103 Killer Bee Intake. Each MF103 Intake System is specifically designed and engineered to be a straight bolt on application and does not require a tune. Halltech intakes have been featured in Corvette Magazine, LSXTV, GM High Tech Magazine, Vette Magazine and can be found on C6 Corvettes on the Street and the Track. The popularity of the C6 Corvette intake is squarely placed on its proven performance and durability. When only the best will do, Bolt on a C6 Corvette Halltech Intake. 

Free Shipping

Fitment: C6 Corvette, Corvette Grand Sport and Z06 (2008 - 2013)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

V2026 Halltech Venom II - C6 Corvette

C6 Corvette Halltech Venom II is next evolution of intakes for the Corvette C6 Base Car with the LS2 motor. Bolt on 15 RWHP/12 lbs ft torque with our all new Corvette C6 LS2 intake design.  This Corvette C6 intake is made from the same mold as the Killer Bee II that dynoed +15 HP/+14lbs-ft. on the Katech Engine Development Superflow dyno.  The same huge high flow K&N Filter will flow over 1250 cfm. This system uses the stock wiring, and MAF sensor for direct bolt on power that will not void your warranty. It comes with Halltech's Beehive Heat Shield to isolate the filter from engine heat and capture cold air with optional cutouts for cold air induction. The new filter has a positive stop built into the flange to eliminate the step ingress to the bridge for smoother flow. It also has the latest technology for high velocity flow through the filter with a bell mouth designed flange. V2026

Manufactured specifically for the 2005 - 2007 6.0L LS2 Corvette, the Halltech Venom II is a direct replacement for your OEM air box and filter. Installation is simple and easy and can be done at home with basic hand tools. Each Venom II Cold Air Intake System includes a specially designed K&N washable and re-usable warhead air filter, air bridge and a complete set of instruction and all necessary hardware for a worry free installation. Installation of the Venom II will not throw codes and does not require an aftermarket tune, Bolt on Horsepower and Torque with a C6 Corvette Halltech Venom Intake System.

Free Shipping

Fitment: C6 Corvette (2005 - 2007)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.