C7 Corvette AMT Motorsport 3/4 Inch Hubcentric Wheel Spacers for Lock and Compression Clearance Verification
The AMT Motorsport 3/4 inch hubcentric wheel spacers (19.05mm) are used on a 2014–2019 C7 Corvette when the goal requires a larger outward wheel position change than 1/4 inch or 3/8 inch spacers provide. On many C7 setups, the deciding check is clearance at front steering lock and at the liner and fender during compression, especially with wider front tires.
AMT offers hubcentric spacers in 0.75 inch thickness. Note that longer ARP studs are required for .75 inch spacers. AMT Part Number: 265075.
AMT Motorsport Wheel Spacer Product Details
- Vehicle: C7 Corvette (2014–2019)
- Spacer thickness: 3/4 inch (19.05mm)
- Design: Hubcentric wheel spacer
- Color: Black
- Stud requirement: Longer ARP studs required for 0.75 inch thickness
Fitment Checks That Matter Most on the C7 Corvette
- Confirm wheel offset and tire width before selecting 19.05mm spacing
- Check front clearance at full steering lock in both directions
- Check clearance at compression for liner and fender edge contact
- Confirm stud length supports safe engagement with this thickness
Benefits
- Moves wheel position outward by 3/4 inch per side where installed
- Hubcentric interface is intended to support centered mounting at the hub
- Appropriate when measurements show a larger offset correction is required
What to Expect After Installation / Use
Expect this spacer thickness to be fitment-driven. Plan stud length first, install using the correct tightening sequence, and re-check torque after short mileage or heat cycles. If the C7 runs wide front tires or a lowered ride height, confirm lock and compression clearance before aggressive street driving or track use.
Corvette Compatibility
- Fits: C7 Corvette Stingray Coupe (2014, 2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Stingray Convertible (2014, 2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Grand Sport Coupe (2017, 2018, 2019)
- Fits: C7 Corvette Grand Sport Convertible (2017, 2018, 2019)
- Fits: C7 Corvette Z06 Coupe (2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Z06 Convertible (2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette ZR1 Coupe (2019)
- Fits: C7 Corvette ZR1 Convertible (2019)
“For my C7, the key was checking lock clearance with the front tires—once verified, the 3/4 inch spacing matched my wheel setup.” – C7 Owner
Custom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.
If your 2014–2019 C7 Corvette requires a larger wheel position change, AMT Motorsport 3/4 inch hubcentric wheel spacers are best chosen with measured offset, tire width, and verified lock and compression clearance.
Vehicle Fitment & Specifications
| Generation: | C7 |
| Model Years: | 2013 - 2019 |
| Trim Level: | Stingray, Grand Sport, Z06, ZR1 |
| Engine Code: | LT1, LT4 |
| Transmission Type: | Manual, Automatic |
| Intended Use: | Street, Track |