AMT Motorsport 1-Inch Hubcentric Wheel Spacers for C7 Corvette
The AMT Motorsport 1-Inch Hubcentric Wheel Spacers, part number 265100, fit 2014–2019 C7 Corvette Stingray, Grand Sport, Z06, and ZR1 models with the LT1 6.2L, LT4 6.2L supercharged, or LT5 6.2L supercharged engine. Sold as a pair, these precision-machined 6061-T6 aluminum spacers move the installed wheels outward by 1 inch, or 25.4mm, while the hubcentric design provides a wheel-centering lip at the hub interface. Longer ARP wheel studs are required, and the exact wheel offset, tire width, ride height, and available clearance must be measured before ordering.
Product Details
- Brand: AMT Motorsport
- Part Number: 265100
- Product: 1-Inch Hubcentric Wheel Spacers
- Vehicle: 2014–2019 C7 Corvette
- Quantity: Sold as a pair
- Spacer Thickness: 1 inch
- Metric Thickness: 25.4mm
- Design: Hubcentric with wheel-centering lip
- Material: 6061-T6 aluminum
- Manufacturing: CNC turned and milled
- Runout: Less than 0.0005 inch
- Finish: Black anodized
- Design Details: Precision stud openings and machined weight-reduction pockets
- Approximate Weight: 1.2 pounds per spacer
- Wheel Stud Requirement: Longer ARP wheel studs required
- Installation Position: Front or rear after complete fitment verification
- Warranty: AMT Motorsport lifetime guarantee
Benefits
- Moves each installed C7 Corvette wheel outward by 1 inch or 25.4mm
- Provides a larger wheel-position correction than 1/4-inch, 3/8-inch, or 3/4-inch spacers
- Uses a hubcentric wheel-centering lip for accurate positioning on the Corvette hub
- Can correct the position of a deeply inset aftermarket wheel package when verified through measurement
- Uses precision-machined aluminum construction with less than 0.0005-inch runout
- Machined pockets reduce unnecessary spacer weight
- Black anodizing helps protect the aluminum from corrosion and road exposure
Important Notes
- Longer ARP wheel studs are required for installation of these 1-inch spacers.
- The longer wheel studs are not included unless specifically added to the order.
- Installing longer pressed-in wheel studs requires removal and proper servicing of the Corvette wheel hubs.
- A 1-inch spacer creates a major outward wheel-position change and should be selected using actual measurements rather than appearance alone.
- Verify wheel offset, tire width, ride height, brake clearance, full steering-lock clearance, fender clearance, and suspension-compression clearance before ordering.
- Clean the wheel hub, spacer, and wheel mounting surfaces before installation.
- Tighten the lug nuts in the correct sequence using the Corvette’s specified torque.
- Recheck lug-nut torque after the initial driving period or heat cycles.
- The spacers are sold as a pair. Order two pairs when installing spacers on all four wheels.
- Professional installation is recommended because longer wheel studs must be pressed into the hubs.
CORVETTE COMPATIBILITY
- Generation: C7 Corvette
- Model Years: 2014–2019
- Models: Stingray (2014–2019), Z06 (2015–2019), Grand Sport (2017–2019), and ZR1 (2019)
- Engines: LT1 6.2L, LT4 6.2L Supercharged, and LT5 6.2L Supercharged
- Body Styles: Coupe and Convertible
- Transmissions: Manual and Automatic
- Installation Position: Front or rear after complete wheel and tire fitment verification
Use Overview
The AMT Motorsport 1-Inch Hubcentric Wheel Spacers are designed for C7 Corvette owners whose wheel package requires a substantial outward position correction. The 25.4mm thickness is most appropriate when measurements show that a deeply inset wheel needs more adjustment than a thinner spacer can provide. Because this is a major change in wheel position, front steering-lock clearance and front and rear suspension-compression clearance must be checked using the Corvette’s exact wheels, tires, ride height, brake package, and alignment.
Why Buy These AMT Motorsport C7 Corvette Wheel Spacers?
AMT Motorsport machines these hubcentric spacers from 6061-T6 aluminum using precision CNC turning and milling. The integrated wheel-centering lip, less than 0.0005-inch runout, tightly machined stud openings, weight-reduction pockets, black-anodized finish, and lifetime guarantee make part number 265100 a purpose-built option for C7 Corvette wheel packages that require a measured 1-inch outward correction.
✅ In-stock items ship within 24–48 hours via Standard Ground.
✅ Free shipping items are available in the Continental US only.
✅ Custom quotes available for 2-Day, Next Day, or Saturday delivery.
✅ Custom or backordered items ship as soon as available.
