AMT Motorsport Adjustable Camber Kit for C6 Corvette
The AMT Motorsport Adjustable Camber Kit fits steel-frame 2005–2013 C6 Corvette Base, 2010–2013 Grand Sport, and 2013 427 Convertible models with the LS2 6.0L, LS3 6.2L, or LS7 7.0L engine. Choose part number 265007 for the complete camber kit or part number 265007S for the kit with front upper-control-arm studs. Both configurations include indexed front and rear camber plates and front upper-control-arm shims for repeatable street, autocross, and track alignment settings.
Product Details
- Brand: AMT Motorsport
- Camber Kit Part Number: 265007
- Camber Kit With Front Studs Part Number: 265007S
- Product: Adjustable Front and Rear Camber Kit
- Vehicle: Steel-frame 2005–2013 C6 Corvette
- Adjustment Locations: Front and rear lower control arms
- Adjustment Range: Ten indexed street and track positions
- Fine Adjustment: Front upper-control-arm shims included with both configurations
- Plate Material: 6061-T6 aluminum
- Finish: Red anodized
- Markings: Laser-engraved adjustment references
- Hardware: Grade 10.9 M14 bolts, nuts, and lock washers included
- Stud Option: Front upper-control-arm studs included with part number 265007S
- Instructions: Full-color installation and adjustment guide included
- Warranty: AMT Motorsport lifetime guarantee
Benefits
- Replaces the factory round eccentric adjusters with defined indexed camber positions
- Provides repeatable front and rear alignment settings for street and track use
- Helps prevent unwanted eccentric movement during high-load cornering
- Provides additional negative-camber adjustment compared with the factory system
- Offers separate street and track ranges without requiring multiple sets of fixed plates
- Includes front upper-control-arm shims for finer camber and caster tuning
- Uses laser-engraved markings to make alignment settings easier to record and repeat
Important Notes
- This kit fits steel-frame C6 Corvette Base, Grand Sport, and 427 Convertible models.
- It does not fit aluminum-frame C6 Corvette Z06 or ZR1 models.
- Both configurations include front upper-control-arm tuning shims.
- Part number 265007S adds front upper-control-arm studs for easier and more frequent shim changes.
- A complete professional four-wheel alignment is required after installation.
- Toe must be checked and corrected whenever the camber positions or upper-control-arm shims are changed.
- Only the front bolt position is adjustable at each rear lower control arm.
- The rear lower-control-arm bolt may be tight near the fuel lines, but cutting the bolt is not required.
- The replacement rear bolt is installed from the opposite direction to simplify installation and future adjustment.
CORVETTE COMPATIBILITY
- Generation: C6 Corvette
- Model Years: 2005–2013
- Models: Base (2005–2013), Grand Sport (2010–2013), and 427 Convertible (2013)
- Engines: LS2 6.0L, LS3 6.2L, and LS7 7.0L
- Frame: Steel
- Body Styles: Coupe and Convertible
- Transmissions: Manual and Automatic
Use Overview
The factory C6 Corvette eccentric adjusters make camber changes convenient, but aggressive cornering, sticky tires, and repeated track use can make consistent alignment settings harder to maintain. The AMT Motorsport Adjustable Camber Kit replaces those round eccentrics with indexed plates that give alignment technicians defined positions for setting, documenting, and repeating front and rear camber. Included front upper-control-arm shims provide the finer adjustment needed to balance camber and caster for the Corvette’s intended street or track setup.
What Corvette Customers Say
A verified CCA customer installing the kit on a C6 Corvette Base reported an easy setup, proper fitment, and clear instructions for four-wheel camber adjustment. The feedback supports the kit as a practical upgrade for Corvette owners preparing for performance street driving and track use.
Why Buy This AMT Motorsport C6 Corvette Camber Kit?
The AMT Motorsport C6 Corvette Camber Kit combines indexed 6061-T6 aluminum adjustment plates, separate street and track ranges, laser-engraved references, front upper-control-arm tuning shims, performance-grade hardware, and an optional stud package. The result is a purpose-built alignment system for Corvette owners who want greater adjustment range, more repeatable settings, and better control over performance alignment changes.
✅ In-stock items ship within 24–48 hours via Standard Ground.
✅ Free shipping items are available in the Continental US only.
✅ Custom quotes available for 2-Day, Next Day, or Saturday delivery.
✅ Custom or backordered items ship as soon as available.
