C6 Corvette AMT Motorsport 3/4 inch Wheel Spacers (2005-2013)

C6 Corvette AMT Motorsport 3/4 Inch Hubcentric Wheel Spacers for Offset Correction

The AMT Motorsport 3/4 inch hubcentric wheel spacers (19.05mm) are a fitment-specific option for a 2005–2013 C6 Corvette when the wheel package and tire width call for a larger outward change than smaller spacers provide. On the C6, the correct thickness depends on your exact trim, wheel offset, and measured clearance.

We list these as hubcentric spacers offered in 0.75 inch thickness and note that longer ARP studs are required for .75 inch spacers. AMT Part Number: 265075. 

AMT Motorsport Wheel Spacer Product Details

• Vehicle: C6 Corvette (2005–2013)
• Spacer thickness: 3/4 inch (19.05mm)
• Design: Hubcentric wheel spacer
• Color: Black
• Stud requirement: Longer ARP studs required for 0.75 inch thickness

Why This Spacer Thickness Requires Verification on the C6 Corvette

• C6 trims and wheel packages vary, which changes outer fender and inner suspension clearance
• Front clearance should be verified at full steering lock and during suspension travel
• Rear clearance should be checked under compression, especially with wider tires

Benefits

• Moves wheel position outward 19.05mm per side where installed
• Designed as a hubcentric spacer to support centered mounting at the hub interface
• Useful when measurements show smaller spacer sizes do not achieve the intended offset change

What to Expect After Installation / Use

Expect this to behave like a measured wheel-package change, not a universal “fits all” spacer. Plan stud length first, install using the correct tightening sequence, and re-check torque after short mileage or heat cycles. If the car is lowered or runs an aggressive tire package, verify compression clearance before spirited driving.

Corvette Compatibility

• Fits: C6 Corvette Coupe (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
• Fits: C6 Corvette Convertible (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
• Fits: C6 Corvette Grand Sport (2010, 2011, 2012, 2013)
• Fits: C6 Corvette Z06 (2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
• Fits: C6 Corvette ZR1 (2009, 2010, 2011, 2012, 2013)

“On my C6, 3/4 inch was only right after I checked offset and compression clearance with the tires I run—then it worked perfectly.” – C6 Owner

Custom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.

If your 2005–2013 C6 Corvette needs a larger outward wheel position change, AMT Motorsport 3/4 inch hubcentric wheel spacers are best selected by measured offset, tire width, and verified lock and compression clearance.