AMT Motorsport 1 Inch Hubcentric Wheel Spacers for C7 Corvette Aftermarket Wheels
The AMT Motorsport 1 inch hubcentric wheel spacers (25.4mm) are a major outward wheel position change for a 2014–2019 C7 Corvette. On many C7 setups, the deciding factor is clearance at front steering lock and liner contact under compression, especially with wider front tire packages or track alignment.
AMT lists these hubcentric spacers in 1 inch thickness and notes that longer ARP studs are required. Finish is black anodized.
AMT Motorsport Wheel Spacer Product Details
- Vehicle: C7 Corvette (2014–2019)
- Spacer thickness: 1 inch (25.4mm)
- Design: Hubcentric wheel spacer
- Color: Black anodized
- Stud requirement: Longer ARP studs required for 1 inch thickness
- AMT part number: 265100
Fitment Checks That Matter Most on the C7 Corvette
- Confirm wheel offset and tire width first, then decide if 25.4mm spacing is realistic for your setup
- Check full steering lock clearance in both directions at the liner and fender edge
- Check compression clearance at your actual ride height and alignment settings
Benefits
- Moves wheel position outward by 1 inch per side where installed
- Hubcentric design supports centered wheel mounting at the hub interface
- Useful when measured fitment goals exceed what thin spacers can provide
What to Expect After Installation / Use
Expect spacer fitment to be clearance-driven, not preference-driven. Plan stud length first, install using the correct tightening sequence, and re-check torque after short mileage or heat cycles. If your C7 runs wide front tires, confirm lock clearance before aggressive street driving or track use.
Corvette Compatibility
- Fits: C7 Corvette Stingray Coupe (2014, 2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Stingray Convertible (2014, 2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Grand Sport Coupe (2017, 2018, 2019)
- Fits: C7 Corvette Grand Sport Convertible (2017, 2018, 2019)
- Fits: C7 Corvette Z06 Coupe (2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette Z06 Convertible (2015, 2016, 2017, 2018, 2019)
- Fits: C7 Corvette ZR1 Coupe (2019)
- Fits: C7 Corvette ZR1 Convertible (2019)
“For my C7, 1 inch only made sense after verifying front lock clearance. Once confirmed, the stance matched my wheel setup.” – C7 Owner
Custom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.
If your 2014–2019 C7 Corvette requires a major outward correction, AMT Motorsport 1 inch hubcentric wheel spacers are best used with confirmed stud length and verified lock and compression clearance for your exact wheels and tires.
Vehicle Fitment & Specifications
| Generation: | C7 |
| Model Years: | 2013 - 2019 |
| Trim Level: | Stingray, Grand Sport, Z06, ZR1 |
| Engine Code: | LT1, LT4 |
| Transmission Type: | Manual, Automatic |
| Intended Use: | Street, Track |