AMT Motorsport 1 Inch Hubcentric Wheel Spacers for C6 Corvette Aftermarket Wheel Package Corrections
The AMT Motorsport 1 inch hubcentric wheel spacers (25.4mm) are a fitment-specific spacer thickness for a 2005–2013 C6 Corvette. This size is most commonly used when the wheel package demands a major outward correction and you are validating clearance with your exact offset, tire width, and ride height.
AMT lists these hubcentric spacers in 1 inch thickness and notes that longer ARP studs are required. AMT Part Number: 265100. Finish is black anodized.
AMT Motorsport Wheel Spacer Product Details
- Vehicle: C6 Corvette (2005–2013)
- Spacer thickness: 1 inch (25.4mm)
- Design: Hubcentric wheel spacer
- Color: Black anodized
- Stud requirement: Longer ARP studs required for 1 inch thickness
- AMT part number: 265100
What to Verify on a C6 Corvette Before Choosing 25.4mm Spacing
- Trim and wheel setup can change available fender clearance and inner clearance on the C6 platform
- Front clearance should be checked at steering lock and through travel on your tire size
- Rear clearance should be checked under compression, especially with wider rear tires
Benefits
- Moves wheel position outward by 1 inch per side where installed
- Hubcentric design supports centered wheel mounting at the hub interface
- Useful for wheel packages where thinner spacers do not achieve the required stance or clearance target
What to Expect After Installation / Use
Expect this spacer thickness to behave like a wheel-package change. Plan stud length first, install using the correct tightening sequence, and re-check torque after short mileage or heat cycles. If the C6 is lowered or aligned aggressively, confirm compression clearance before hard driving.
Corvette Compatibility
- Fits: C6 Corvette Coupe (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
- Fits: C6 Corvette Convertible (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
- Fits: C6 Corvette Grand Sport (2010, 2011, 2012, 2013)
- Fits: C6 Corvette Z06 (2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013)
- Fits: C6 Corvette ZR1 (2009, 2010, 2011, 2012, 2013)
“I went to 1 inch on my C6 only after checking offset and rear compression clearance. Big change, but correct for my setup.” – C6 Owner
Custom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.
If your 2005–2013 C6 Corvette build requires a large outward correction, AMT Motorsport 1 inch hubcentric wheel spacers are best used with confirmed stud length and verified clearance at lock and compression.
Vehicle Fitment & Specifications
| Generation: | C6 |
| Model Years: | 2005 - 2013 |
| Trim Level: | Stingray, Grand Sport, Z06, ZR1 |
| Engine Code: | LS2, LS3, LS7, LS9 |
| Transmission Type: | Manual, Automatic |
| Intended Use: | Street, Track |