1" AMT Motorsport Hubcentric Spacers for the C5 Corvette
The AMT Motorsport 1 inch hubcentric wheel spacers (25.4mm) are a large wheel position change for a 1997–2004 C5 Corvette. This thickness is typically used when wheel offset and tire width have been measured and you are correcting stance or clearance on a specific wheel package, not guessing.
We list these hubcentric spacers in 1 inch thickness and note that longer ARP studs are required. Part Number: 265100. Finish is black anodized.
AMT Motorsport Wheel Spacer Product Details
- Vehicle: C5 Corvette (1997–2004)
- Spacer thickness: 1 inch (25.4mm)
- Design: Hubcentric wheel spacer
- Color: Black anodized
- Stud requirement: Longer ARP studs required for 1 inch thickness
- AMT part number: 265100
Why 1 Inch Spacing Is Fitment-Specific on the C5 Corvette
- C5 cars often run mixed aftermarket offsets over time, so 25.4mm should be selected from measurements
- Front clearance should be checked at full steering lock for liner and fender edge contact
- Rear clearance should be checked under compression for inner and outer clearance on your tire width
Benefits
- Moves wheel position outward by 1 inch per side where installed
- Hubcentric design supports centered wheel mounting at the hub interface
- Useful when a wheel package needs a larger outward correction than thin spacers provide
What to Expect After Installation / Use
Expect a noticeable stance and clearance change. Plan the correct stud length first, install using the correct tightening sequence, then re-check torque after short mileage or heat cycles. If the C5 is lowered or runs wide tires, verify steering lock and compression clearance before spirited driving.
Corvette Compatibility
- Fits: C5 Corvette Coupe (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004)
- Fits: C5 Corvette Convertible (1998, 1999, 2000, 2001, 2002, 2003, 2004)
- Fits: C5 Corvette FRC (1999, 2000)
- Fits: C5 Corvette Z06 (2001, 2002, 2003, 2004)
“On my C5, 1 inch was the right call only after I measured offset and checked lock and compression clearance. Solid fit and finish.” – C5 Owner
Custom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.
If your 1997–2004 C5 Corvette wheel setup calls for a major outward change, AMT Motorsport 1 inch hubcentric wheel spacers work best when stud length and clearances are confirmed for your exact wheels and tires.