Corvette Parts and Accessories

C8 Corvette Stingray Cold Air Intake System

C8 Corvette K&N Intake System 63-3120 - Stingray. Improve the throttle response and air on your C8 Stingray with a Cold Air Intake from K&N. Specifically designed and engineered for the 6.2L LT2 C8 Corvette Stingray engine, the 63-3120 adds 22.28 Horsepower at 5000 RPMs. This C8 Corvette Intake replaces the restrictive factory air box and reduces the inherent air restriction.

Designed with a high density polyethylene (HDPE) rotationally molded air tube that helps increases air flow volume and speed. This system is paired with a high flow oiled cotton gauze filter that is washable and reusable. The oversized conical filter media allows you to go up to 100,000 miles between filter service under normal operating conditions. A custom heat shield protects the intake from the high engine temperatures of your engine bay, ensuring that you get the coolest air possible.

C8 Corvette K&N Intake System 63-3120 for your C8 Stingray was designed and engineered in K&N’s state of the art facility in Southern California, using CAD design and air flow testing on their state of the art Superflow Corp. SF-1020 flow bench which is capable of measuring air flow up to 1020 cubic feet per minute. The C8 Corvette Stingray Cold Air Intake Systems are backed by their famous Million Mile Warranty and can be installed at home by competent mechanics. Included with this kit are 3 Stainless Steel Clamps, cotton gauze filter, heat shield and intake pipes and all needed installation hardware. Estimated install time is approximately 90 minutes. Installing a K&N Intake on your Corvette will not cause a check engine light and does not require a Tune. 

Free Shipping

Fitment: C8 Corvette Stingray Coupe (2020, 2021, 2022, 20023 and 2024)

Fitment: Will NOT fit Hard Top Convertible.

Product Note: Not legal for Highway use in States adopting California emissions regulations. Not legal for sale in California.

C8 Corvette PVC Oil Catch Can

C8 Corvette Corsa Oil Catch Can - CC0005. Corsa Oil Catch Cans are manufactured with high grade 6061 Aluminum and feature a multi stage oil separation chambers. Each PCV oil catch can has been designed and engineered with OEM quick disconnect fittings for easy access and quick cleaning. A bronze filter prevents oil vapor re-entry and ensures that the gases stay in the can and properly condense. Included with each C8 Corvette Oil Catch Can is a power coated bracket for easy mounting, multi reinforced hoses and a threaded can housing. Installation time is approximately 30 minutes and requires basic hand tools. Corsa CC0005 is for Coupes only

LTx engines all suffer from oil blow by into the intake manifold and runners under hard driving conditions. The PVC system or Positive Crankcase vent is engineered to vent and release crankcase pressure that otherwise could cause oil leaks or blown seals. The C8 Corvette PVC Oil Catch Can helps trap oil vapor and gasses and separate them into a holding chamber instead of letting them into your intake system. The major benefit to installing an Catch Can on your C8 Corvette is that it prevents the gumming up of your air systems and help prevent carbon build up on your valves. Thoughtful design locates the oil catch can in an easily accessible, yet safe location for easy cleaning

CORSA’s drive to produce the world’s best C8 Corvette Oil PVC Oil Catch Can is evident throughout every aspect of its design. From its earlier conception through its final development, the C8 Corvette Corsa Oil Catch Can had you the end user in mind and performance at the forefront of manufacturing and quality.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe

Halltech C8 Corvette Intake System

C8 Corvette Halltech Hornet Intake - HRNT.518 is the Intake you are looking for to add dyno proven horsepower and torque to your Corvette Stingray. Founded in a garage in 1999 on the West Coast, they quickly moved passed very humble beginnings and became an industry expert in Cold Air Intake Systems for the modern Corvettes. They are now ready to introduce the much-awaited Halltech C8 Corvette Intake System.

This is a direct CAI replacement so you can make this performance enhancing modification without the need for an engine tuning after you complete the upgrade.  Dyno testing has resulted in 17+ increase in horsepower to go along with 25+ increase in torque. This is done with the best in C8 Air Filter design that will add over 1000 square inches of air filtration, thus allowing your C8 Stingray to breath in a healthy amount of air for maximum performance. The C8 Halltech Hornet Intake System is purposely designed with molded-in velocity stack and reverse flow partition to ensure laminar flow at the MAF sensor to correctly determine the amount of airflow to the engine.

Halltech C8 Corvette Intake System is engineered and designed for the coupe and Hard Top Convertible. So this model will not fit the hard top convertible without slight modifications to the cover under the trunk carpet and the actual lid partition may be slightly different (ramp vs funnel) on production units. The use of a stainless steel backplate will ensure that all harness fasteners are attached in their factory locations.  Keep in mind with installation you will need to reuse your stock connector hoses, pcv fitting, inlet ducts and mounting bolts.

It's not a proper Corvette until it's a Halltech Corvette.

Free Shipping

Fitment: C8 Corvette (2020, 2021, 2022, 2023, 2024) Coupe and HTC

Fitment: (the only modification required for the HTC is to simply drill-out the top center rivnut on the access panel)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette Stingray Carbon Fiber Cold Air Intake

C8 Corvette Corsa Carbon Fiber Intake - 44003D.  The C8 was worth the wait and now it is time to add the best-in-class Cold Air Intake system from Corsa. Early reviews rave about the amazing sound and increase in throttle response. Designed for a snug fit with the classic beautiful finish expected from Carbon Fiber but also one that is very strong and lightweight and built to perform.

In the late 1950's high tensile strength carbon fibers were discovered and it did not take long before the benefits of these high-strength fibers were clear. They weighed a fraction of the weight of steel, yet contained much greater tensile strength.  In the pursuit of ultimate performance, the C8 Corvette Stingray Carbon Fiber Cold Air Intake takes advantage of this by using two dry tech high performance free flowing filters inside an enclosed case. The result is an increase in horsepower and torque with a 50,000 mile maintenance schedule.

CORSA’s drive to produce the world’s best air intake systems is evident throughout every aspect of the business. From its earlier conception through its final development, the C8 Corvette Corsa Carbon Fiber Intake system had you the end user in mind and performance at the forefront of manufacturing and quality.

Due to the snug fit required by the mid-engine changes to the Chevy Corvette C8 design, installation will require a touch of patience if you are going to give it a go on your own as it rates at the high end of difficulty. CORSA recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel.

C8 Corvette Corsa Carbon Fiber Intake System remain the standard by which all other air intake systems are measured.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray Coupe and Hard top Convertible

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette Throttle Body Spacer

Maximize horsepower and improve throttle response without the obnoxious whistling with the C8 Corvette aFe Throttle Body Spacer! This inexpensive upgrade installs between the stock intake system and the throttle body and improves volumetric efficiency. This results to optimum air and fuel ration, maximum combustion, and greater horsepower and torque gains.

The C8 Corvette aFe Throttle Body Spacer is precision machined from premium quality, solid 6061-T6 aluminum for maximum performance, weight reduction, and high strength. Its unique serrated/helix design creates more air turbulence than typical helix only throttle body spacers. The greater air turbulence optimizes the air and fuel ration for maximum combustion, resulting to more horsepower and torque gains and improved throttle response. C8 Corvette Throttle Body Spacer also does not produce the annoying whistling sound commonly associated with throttle body spacers. Its black anodized finish protects against corrosion while improving the looks of the engine bay. AFE 46-34017B Throttle Body Spacer is designed for use on factory intake system only.

The C8 Corvette Throttle Body Spacer includes all hardware needed and easily installs into the factory mounting location. Each kit comes with a high quality gasket for a 100% secure seal, durable silicone coupling that guarantees the perfect fitment and uncompromised air flow into the factory air intake system, and step by step installation instructions. This AFE Power Throttle Body Spacer for C8 Corvette models is currently not CARB exempt and is not for sale or use on vehicles registered in the California Department of Motor Vehicles. AFE Power part number 46-34017B is also not legal for use on vehicles registered in other states that follow CARB standards, check your local state emission standards. All AFE Silver Bullet Throttle Body Spacers are proudly designed and manufactured in the USA and covered by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Will NOT fit on an aFe Intake Systems

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Intake Throttle Body Spacer

The C8 Corvette aFe Silver Bullet Throttle Body Spacer is an easy, effective, and inexpensive way to upgrade your engine’s performance and improve fuel efficiency. It has been dyno-tested to add up to 12 hp and 14 ft./lbs of torque without the whistling typically associated with ordinary helix spacers. If you are looking at supercharging your C8 Corvette’s combustion chamber, the aFe Silver Bullet Throttle Body Spacer is the quiet yet most powerful solution.

To guarantee long-lasting strength, weight reduction, and superior performance, the C8 Corvette aFe Silver Bullet Throttle Body Spacer is CNC crafted from solid 6061-T6 aluminum. The innovative serrated/helix design creates power-generating air turbulence that helps achieve the best air and fuel ratio for maximum combustion. This increases horsepower and torque, improves throttle response, and boosts engine performance without the obnoxious intake whistling. The C8 Corvette AFE Intake Throttle Body Spacer features a black anodized finish too add a stealth look into the engine bay. This C8 Corvette AFE 46-34023B Silver Bullet Throttle Body Spacer will only fit aFe Power Intake Systems part numbers 57-10013D, 57-10013R, 58-10007D, and 58-10007R. For factory intake systems, use throttle body spacer part number 46-34017B.

The C8 Corvette AFE Intake Throttle Body Spacer kit comes with all necessary hardware and uses factory mounting locations for the hassle-free installation. It’s supplied with a premium gasket for the perfect seal, silicone coupling for the secure fitment with the aFe Power intake system, and comprehensive installation instructions. This product is currently not CARB exempt and is not legal for sale or use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in other use that follows CARB emission standards. This AFE Throttle Body Space for C8 Corvette models is proudly made in the USA and backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Will NOT fit on an OEM Intake

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Air Filter

For the best Corvette yet, aFe Power engineered the highest flowing air filter in their lineup. The C8 Corvette aFe Magnum FLOW Pro 5R Air Filter is created to feed the new LT2 V8 engine with colder, denser and cleaner air for maximum performance. C8 Corvette performance air filter part number 10-10148 can deliver up to 27% air flow increase.

In terms of construction, design, and air flow technology, the C8 Corvette AFE Air Filter beats all other air filters in the market. It features not just a single layer, but five progressive layers of pre-oiled cotton gauze media with superior filtration efficiency. The progressive layering allows it to still delivery maximum air flow even when dirty. The media of the aFe Magnum FLOW Pro 5R Air Filter is the best choice for street and track driving. It has larger surface area to hold more dust while still providing high air flow, leading to longer service intervals. Cleaning and recharging it is easy with the aFe Power Cleaner and oil, sold separately. The rounded deep open pleats offer greater surface area that traps more dirt than competition. Another distinctive feature of this C8 Corvette AFE Air Filter is the progressive bump seal that works great even with the most uneven housing. Designed for the perfect sealing and fit, this pliable sealing surface eliminates the need for sealants and gaskets. The base and top are built tough with its 100% polyurethane construction. This polyurethane material is highly resistant to damage from the repeated heat cycles from the engine bay. While other materials degrade from the heat, polyurethane can maintain its original shape and strength.

This performance air filter upgrade AFE 10-10148 for the C8 Corvette is backed by a lifetime warranty for the entire life of your vehicle.

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

C8 Corvette AFE Intake

aFe offers the most powerful air filter and intake tube combination in their line-up for the new Chevy C8 Corvette. The C8 Corvette aFe Track Series Carbon Fiber Intake comes with everything your vehicle needs to make the most power, drive faster, and achieve its best performance.

The C8 Corvette aFe Track Series Carbon Fiber Intake uses the best and most powerful air filter from aFe Power’s line-up. The massive, dual 4 in. flange 360-degree radial flow air filters utilize the Pro-5R performance filters with the pre-oiled, progressive 5-layer cotton gauze filter media. These monster filters will deliver the highest flow of colder and cleaner air to your V8 to boost horsepower and performance. The Pro-5R provides longer service before cleaning is required and the best choice for street or track driving. The intake tube of the C8 Corvette AFE Cold Air Intake features a lightweight twill weave carbon fiber construction and innovative design to direct massive air flow to the engine. This carbon fiber intake tube works great in reducing weight compared to metal tubes while upgrading the engine bay’s appearance. To further improve engine performance and increase cold air, the filters are enclosed in a heat-resistant housing made of cross-linked polyethylene polymer. It keeps away hot engine air and collects the coolest air possible from the factory inlets on the side of the car. Custom designed for the perfect fit and easy installation, the housing uses silicone bellow couplings and mounts directly into the factory locations.

This AFE 57-10013R Cold Air Intake for C8 Corvette models include high-quality hardware for strength, durability, and secure installation. This kit comes complete with stainless steel clamps, silicone couplings, and installation instructions. The C8 Corvette AFE Cold Air Intake is currently not CARB exempt and is for use on vehicles registered with the California Department of Motor Vehicles. It is also not for use on vehicles registered in states that follow CARB standards. Part Number 57-10013R is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C8 Corvette AFE Cold Air Intake

aFe Power designed the Black Series Carbon Fiber Intake to match the power of GM’s most powerful vehicle yet – the C8 Corvette. The C8 Corvette aFe Black Series Carbon Fiber Intake is fully loaded with features to further boost the all new LT2 V8.

All the power-generating abilities of the C8 Corvette aFe Black Series Carbon Fiber Intake begin from two massive five layer performance air filters. The dual 4 in. Flange 360-degree radial flow air filters will feed your engine with the biggest amount of colder, cleaner air for maximum horsepower gains. The Pro 5R air filter features inverted tops giving the filter bigger surface area for extended service intervals. From the filter, air is directed to the 100% carbon fiber intake tube that has been designed using the latest CAD technology and dyno-tested for greater air flow. The solid, carbon fiber construction is lightweight, robust, and greatly enhances the look of the engine bay. The two huge air filters are enclosed in an open-element XLPE (cross-linked polyethylene) polymer housing to keep away hot engine air maximizing engine performance. Custom-designed for a perfect fit, this heat-resistant housing directly installs into the factory mounting locations. The C8 Corvette AFE Cold Air Intake comes with a high gloss clear-coated twill weave carbon fiber cover to further diminish hot engine air, reduce weight, and match the intake tube for a very aggressive look. This intake cover features the black series emblem and aFe Power laser etched washers and bolts to boast authenticity and upgrade your engine bay’s appearance.

AFE 58-10007R intake system comes complete with high quality stainless steel clamps and durable silicone couplings for a secure installation. This C8 Corvette AFE Cold Air Intake is not CARB exempt and is not legal for sale or use on vehicles registered to the California Department of Motor Vehicles. It is also not legal for use in other states that follow CARB standards. This AFE Cold Air Intake for C8 Corvette models part number 58-10007R is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.