Corvette Parts and Accessories

C8 Corvette Corsa Xtreme with NPP

C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is an added bonus to the CORSA Performance Exhaust systems as it results in more power, less backpressure, greater fuel economy, and more.

What's Included with the NPP C8 Corvette exhaust system

The NPP C8 Corvette Corsa exhaust system is intended for the all new Stingray Chevrolet Corvette V8 C8 6.2L and is offered in your choice of Polished or Black pro-series tips that bring a fresh style to your Stingray. It also comes complete with an Xtreme Sound Level of 9dB louder and 1dB quieter than stock. This Corsa NPP valve assemblies direct bolt to stock actuator motors and provides maximum exhaust volume and tone control with four active valves. The C8 Corsa Cat Back Exhaust System also includes two NPP valves and two AFM valves to control volume and drone during throttle application and different drive modes, without provoking a check engine light.

The C8 Corvette Corsa Xtreme exhaust system is built tough as it's made of durable stainless steel to last for many years of use. Specifically designed to deliver a tuned sound, raised volume, and quality drone control, no matter what your exhaust settings are. The Fresh: C8 Corvette Corsa Cat Back Exhaust 21100 – NPP is the ultimate choice for any C8 Corvette enthusiast.

Features and Specs of the Corsa C8 Cat-Back Exhaust 21100

• Maintains all Sound Modes
• +9 Decibels Louder and -1 Decibel Quieter
• 4 Valve NPP and AFM System
• +18 Horsepower and 16 LBS of Torque
• Custom X-Pipe Design
• Two Pro-Series Polished Tips
• Patented Reflective, No-Drone, Sound Cancellation Technology
• Lifetime Warranty - 5 Years Valves
• 304 Stainless Steel Construction 3.0"
• Sharp Looking Exhaust
• No CEL
• Easy to Install Without Welding
• 2.5" Diameter Tubing
• Mandrel Bent
• Straight-through Design
• Converts Fumes Into Unharmful Gases
• All Detailed Instructions and Hardware Included
• Guaranteed Free From Defects for Workmanship and Material
• Manufactured in Berea, Ohio, USA

Fitment: 2020, 2021 C8 Corvette Stingray with NPP

Product Note: Uses stock AMF and NPP Valves

C8 Corvette AWE Exhaust System

AWE tuning combined aggression and sophistication with their Touring Edition Exhaust System! This performance package offers the most aggressive sound and performance in a sophisticated design perfect for your Vette. This kit went through rigorous testing including road-course, drag, and street environments to guarantee powerful and consistent performance in any driving condition. C8 Corvette AWE Touring Edition Exhaust have been dyno-tested to generate maximum power gains of up to 19 hp and 15 lbs-ft. of torque.

C8 Corvette AWE Touring Edition Exhaust system features AWE Tuning’s patented 180 technology Drone-canceling solution responsible for the deep, aggressive exhaust note without the dreadful drone when driving on highway speed. Because the 180 technology is controlled by your driving style, you get to enjoy the exotic loud soundtrack when driving fast or the quiet cabin comfort when cruising. The C8 Corvette AWE Exhaust System is made for maximum strength with its solid T304L stainless steel construction while offering 31 lbs. in weight savings compared to stock. The handcrafted 3 in. mandrel bent pipes with 0.65 in. wall combined with the straight through design significantly eliminate restrictions allowing smoother and faster flow of exhaust gases resulting to superior power gains and impressive performance. This Touring edition C8 Corvette AWE Exhaust System has tough 8 in. flex sections with stainless steel internal linings that diminish engine movements for improved durability. C8 Corvette AWE Cat-back Exhaust ends in massive quad 4.5 in. double-walled slash cut tips that comes in a striking Chrome Silver finish (part number 3015-42151) and stealth-looking Diamond Black finish (3015-43159).

It is supplied with AFM valve stimulators, high quality aluminum heat shield, and installation instructions. Designed for an easy direct-bolt on installation, no cutting or modifications necessary. This performance exhaust will not affect your vehicle’s factory emissions equipment. This kit is proudly engineered and manufactured in-house in AWE’s Pennsylvania USA facility, using all-American made materials. This Touring Edition C8 Corvette Cat-Back system comes with AWE’s perfect fit guarantee, No CEL guarantee, and lifetime warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray Coupe and Convertible

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AWE Exhaust System - Muffler Delete

Your C8 Corvette deserves the best sounding and most powerful exhaust on the planet. With its sophisticated bespoke asymmetric design, the C8 Corvette AWE Track Edition Exhaust will deliver AWE’s signature tone while improving horsepower gains throughout the RPM range. This performance exhaust went through rigorous testing in drag, road-course, and long-term street environments to ensure that it will unlock your engine’s full power potential. C8 Corvette AWE Track Edition Exhaust system has been dyno-tested to produce maximum power gains of up to 19 hp and 15 lbs.-ft torque at the wheels.

This cat-back C8 Corvette Muffler Delete Exhaust System is hand-crafted from 0.65 in. walled T304L stainless steel that is superior in strength and durability but weighs so much lighter than your stock system. This track edition kit offers up to 39 lbs. in weight savings compared to the factory set up. They feature CNC-machined mandrel bends, optimized pipe diameters, and a straight-through design allowing smoother, faster exhaust flow for maximum performance and improved throttle response. The C8 Corvette Muffler Delete Exhaust System is built with rigid 8 in. internally lined stainless steel flex sections that work great in isolating engine movement for life-long reliability. This powerful system exits in quad 4.5 in. double-walled slash cut tips that comes in Chrome Silver finish (part number 3020-42080) or Diamond Black finish (part number 3020-43086) for the added stealth looks.

The Track Edition Cat-back exhaust system is supplied with AWE AFM valve stimulators, premium quality aluminum heat shield, and installation instructions. This kit is designed for a hassle-free direct bolt-on installation, no cutting or modifications required. It does not affect factory emissions equipment. The C8 Corvette AWE Cat-back Exhaust system is proudly engineered, manufactured, and astringently tested in AWE’s Pennsylvania, USA facility. It comes with AWE’s perfect fitment guarantee, No CEL guarantee, and limited lifetime warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

Akrapovic Slip on Exhaust S-CO/TI/3 - C8 Corvette Stingray

C8 Corvette Akrapovic Exhaust System - Slip-On - Stingray - NPP.  This Akrapovic Exhaust System has been designed and engineered to deliver unrelenting performance, amazing sound and no compromise comfort for your Stingray Corvette. 

Manufactured with the highest grade Titanium and fully insulated to prevent any excess heat from damaging other engine parts or making its way into the cabin. The right and left connecting tubes are different diameters to increase stiffness and enhance the overall sound experience. Finished with twin right and left Titanium tips with a black interior, this C8 Corvette Akrapovic Exhaust System checks all the boxes. 

The Akrapovic Slip on Exhaust for the C8 Corvette Stingray provides a traditional V8 throb at low RPMs which evolves into a rich roar as the RPM rise. This exhaust systems weighs in at a whopping forty seven percent lighter than the OEM system and provides and additional 8.0 Horsepower and 15.6 foot pounds of torque. The C8 Corvette Akrapovic Slip on Exhaust System will not require remapping or an aftermarket tune. Upgrade your system with an optional set of fully insulated high flow cats or cat by-pass pipe.  

Perfectly designed and engineered to fit your Stingray Corvette. Crafted from the best Titanium and aircraft grade stainless steel, this system is a direct fit and will mate to your OEM Exhaust Pipes without modification to your C8 Corvette. The Slip-On System operates with NPP Valves that allow for full operation of your driver select exhaust volume. C8 Corvette Stingray Akrapovic Slip-On Exhaust System S-CO/TI/3. 

Free Shipping

Fitment: C8 Corvette Stingray 2020, 2021 and 2022 With NPP Exhaust

Product Note: Will Not Fit C8 Corvette Z06

MBRP C8 Corvette Straight Pipes

C8 Corvette MBRP Cat Back Exhaust - Stingray. Look no further for one of the loudest exhaust systems on the market for the C8 Corvette Stingray. MBRP C8 Corvette Stingray Exhaust Systems take the rear engine sound to a whole new level. With over 20 years of exhaust manufacturing experience, the new MBRP Corvette Exhaust Systems for the C8 are everything you have come to expect from one of the world's leading manufacturers of performance exhaust systems. Each C8 Stingray Exhaust is specifically designed and engineered to fit your Corvette and comes with everything you need for a easy, no weld, and worry free installation.

MRBR C8 Corvette Straight Pipes are manufactured using the very best T-304 Stainless Steel and are Mandrel bent for maximum air flow. Not only will this system perform, but it looks good too. With Quad 4.5 inch Carbon Fiber Tips, the MBRP Corvette Exhaust will turn heads with its good looks and it deep, smooth Muscle Car Sound. This 3 inch C8 Corvette Exhaust System has a deep tone at idle and is about as loud as you can get at wide open throttle. Each system comes with a full set of instructions and everything you need for installation. This exhaust will not trigger CEL or require a tune. Improve the Performance, Sound and Style of your C8 Corvette Stingray with a MBRP Straight Pipe Exhaust System and enjoy Free Shipping on Us!

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Intended for Non-NPP Corvettes, will delete NPP on NPP cars

C8 Corvette Stingray ARH Exhaust System 

Take your Stingray to the next level with a C8 Corvette American Racing Headers R/T Cat Back Exhaust. Born from a legendary line of Corvette Exhaust systems, this cat back will not disappoint. You can bet that every bit of their 40 plus years of exhaust fabrication experience went into the design and engineering of this system for the all new C8 Stingray.

Why American Racing Headers? They are not in the business of making exhaust systems, they are in the business of making Horsepower. Look at just about any form of motorsports and you can see ARH is represented by their customer winning Championships and setting records along the way. The skilled fabricators at ARH are not only craftsman, but racers and street enthusiasts. 

Each C8 Corvette Stingray ARH Exhaust System is proudly manufactured and sourced with High Grade Aircraft quality T304 Stainless Steel. All systems are mandrel bent and tested for maximum performance with no drone, Offered in your choice of Polished Stainless Steel or Black Powder Coated tips We often get asked "What Exhaust System sound sounds best on the C8 Corvette Stingray," and the answer is ARH. The C8 Corvette American Racing Headers R/T Cat Back Exhaust eliminates the NPP Valves so you can get the true sound of your Stingray throughout the entire RPM range. The C8 ARH Exhaust System was designed and tested to give you a drone free sound experience that lets you control the exhaust volume with the gas pedal. Give the gas pedal a slight push and you get a tuned performance sound, mash it to the floor and you get a sound only reserved for an IMSA track. 

Each ARH Cat Back Exhaust comes with everything you need for a complete installation that will transform your C8 Corvette Stingray.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Eliminates NPP Valves

C8 Corvette Stingray Corsa Xtreme with NPP

 C8 Corvette Corsa Cat Back Exhaust 21103 – NPP is intended for the C8 Corvette Stingray V8 C8 6.2 L. This Cat Back exhaust directly integrates to Valve Actuator Stock NPP, this actuator integration prevents CEL and deletes the AFM stock valve, to keep this part, use Part #21100.

The Cat-Back 3.0" AFM Active Valve has an Xtreme Sound Level that provides 9dBs louder than Stock and 1dB quieter. CORSA NPP valve assembly directly bolts to stock actuator motors. It is intended for Corvettes with factory NPP.

V8 Sound Controlled

The C8 Corvette Stingray Corsa Xtreme exhaust system with NPP puts control at your fingertips. It allows you to maintain complete control of the C8 Corsa Corvette sound profile that is complete with fully functional CORSA Cast valves NPP that seamlessly integrate to the C8 stock actuators.

Each NPP system is louder by +9 DBs and quieter by -1 DB than the stock system and incorporates CORSA's proprietary RSC Technology offering a drone-free driving experience along with the 6.2L LT2 engine that releases assertive exhaust notes with heavy acceleration. The AFM valve — in this system — is replaced by a machined simulator bracket specifically engineered to prevent the AFM Check Engine Light. Thus, this C8 CORSA Cat-Back system is ideal for drivers who are aggressive and plan on driving in "Track Mode".

Features and Specs Include:

• 16 lbs lighter than stock
• 2 NPP Only Valve System
• Maintains all Sound Modes
• 16 torque and 18 horsepower
• +9 DBs. Louder / -1 DBs. quieter
• Valve Simulator Bracket AFM: Machined
• 304 Stainless Steel Construction
• Lifetime Warranty for 5 Years Valves
• Two 4.5" Pro-Series Tips
• Mandrel Bent
• *4 Cylinder Mode that may show light resonant frequencies
• Straight-through Design
• Manufactured in Berea, Ohio, USA
• Includes instructions and hardware

Fitment: 2020, 2021 C8 Corvette Stingray with NPP

Product Note: Retains NPP Valves, Eliminates AMF Valves

C8 Corvette Stingray Corsa Xtreme Exhaust System

 C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 with 4.5" Quad Pro-Series Tips, is 13dBs louder than stock and is offered in your choice of Polished or Black Tips. 

Pure Sound with No Restrictions

The Corsa Xtreme Cat Back Exhaust 21104 was created for the track. Track Series C8 CORSA Performance Cat Back exhaust systems was designed to eliminate restrictions, bring on the noise, and maximize weight savings. Each Cat-Back exhaust system was Track-Tested, resulting in being Dyno proven to maximize performance while producing up to 16 LBS Ft. of TQ. and 18 HP. Thus, 27 pounds were shaved from this stock exhaust system.

Features and specs included in this Cat-Back exhaust system:

• 18 horsepower - 16 torque
• No Valve System
• Constructed with 3.0" 304 Stainless Steel
• AFM Machined - Valve simulator bracket.
• Louder than stock by 13 decibels
• 4.5" Twin Pro-Series Tips
• No Welding required
• Lifetime Warranty
• Mandrel Bent
• Includes Hardware & Detailed Instructions
• Manufactured in Ohio, USA
• Straight-through Design

C8 Corvette Corsa Xtreme Cat Back Exhaust 21104 system was designed for the 2020/2021 C8 Chevy Corvette V8 6.2L. Actuator integration prevents CEL. Deletes stock AFM Valve, but if you would like to keep AFM, you can use part #21102. Fits all NPP Corvettes & non-NPP Corvettes. However, to get the full use of NPP, use part #21103, or for NPP plus AFM, you can use part # 21100

All vehicle-specific CORSA products are designed and engineered to match the properties of vehicles they were specifically designed for, delivering perfect performance and fitment. In addition, Corsa branded exhaust systems come with a limited lifetime warranty that lasts for the time you own your vehicle. 

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Retains AMF Valves, Eliminates NPP

C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips

The C8 Corvette Corsa Xtreme Cat Back Exhaust 21102 is used for the 2020 – 2021 C8 Chevrolet Corvette 6.2L V8 and fits both NPP and Non-NPP Corvettes while integrating directly with stock valve AFM actuator. For full valve usage, use Part # 21100. No Drone during 4 cylinder mode.

The C8 Corvette Corsa 3.0" Cat Back AFM with Quad 4.5" Tips has 13dBs louder than stock levels Xtreme Sound and the assembly of the Corsa AFM valve bolts to stock actuator motors directly. It should be used on Corvettes with AFM from the factory.

Corsa's Refined Track System

This exhaust system is like the Corsa Performance Track Series as it is made for those looking for an ultra-aggressive exhaust without resonance that can be caused by a 4 cylinder economy operation mode. Corsa's C8 AFM Only cat-back exhaust was manufactured to bring the noise, maximize weight savings, and eliminate restrictions while reducing the resonance you get from 4 cylinder mode. Offered in Polished Tips (21102) or Black Tips (21102BLK)

Each system underwent Track-Testing and was Dyno proven to perform at maximum capacity producing up to 16 LBS Ft. of Torque and 18 Horsepower. All while eliminating 25 lbs. from its stock exhaust system.

Features of the Corsa Performance C8 Cat-Back AFM include:

• 18 horsepower and 16 torque
• AFM Only Valve System
• 13 DBs. louder than stock
• 304 3.0" Stainless Steel Construction
• 5 Years Valves/ Lifetime Warranty
• Straight-through Design
• Mandrel Bent
• 4.5" Pro-Series Tips
• All Hardware and Instructions are Included
• Manufactured proudly in Berea, Ohio of the U.S.

Corsa recommends a professional perform the exhaust system installation. In addition, to get rid of the check engine light, some C8 exhausts may need a GM valve to relearn the sequence, because of the GM factory tolerances.

Fitment: C8 Corvette Stingray 2020, 2021

Product Note: Retains AMF Valves, Eliminates NPP

C8 Corvette Muffler Delete Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips. Let your Stingray breathe with this Muffler delete exhaust system from advanced Flow engineering. Manufactured to be the loudest exhaust system for the C8 Corvette, aFe Power utilized only the most advanced CAD technology for its race-proven design and incorporated the finest stainless steel for a lifetime of satisfaction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This C8 Corvette Muffler Delete Cat Back Exhaust utilizes 3 inch – 2-1/2 inch mandrel bent T-304 solid, austenitic 304 stainless steel for unrivaled strength, harmonic balance  and long-lasting durability. The muffler delete design unleashed more HP/TQ while producing a drone free, crisp, aggressive exhaust note. This C8 Corvette aFe Muffler Delete Exhaust System is built with a mitered merge x-pipe that evenly distributes exhaust pulses across the entire system to maximize scavenging and reduce drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ inch polished stainless steel tips. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette Muffler Delete Exhaust System is designed to be an exact fit for your Stingray. It uses all the same factory style flanges and hangers so there is no welding, cutting or permanent modification required. Included is all the necessary hardware and a full set of step by step instructions for an easy installation. AFE 49-34127NM-P includes factory style exhaust valves that uses the factory motor, (not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Mach Force Exhaust System

The Mach-Force series C8 Corvette aFe Mach Force Exhaust System is the most powerful, best looking, and best aftermarket replacement for your restrictive factory exhaust. Designed using only cutting-edge CAD technology and built with T-304 stainless steel, this kit will surely outperform competition in sound, strength, and performance gains.

The C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is constructed for maximum strength and durability using 3”- 2-1/2” 304 grade stainless steel pipes with brushed finish. Featuring very smooth and precision-diameter mandrel bends, this system greatly reduces restrictions, improves engine efficiency, and produces more horsepower and torque than competition. The muffler delete design offers a very aggressive, performance growl without the obnoxious drone for a crisp, clean sound of power when you hit the gas. This C8 Corvette aFe Mach Force Exhaust System features an integrated mitered merge x-pipe that works great at balancing and distributing the exhaust pulses throughout the system to maximize scavenging and minimize droning. Utilizing the most advanced CAD technology and precision TIG welding, this system delivers race-proven design, powerful performance, and high-tolerance factory fitment. This C8 Corvette Cat Back System has an interlock flex pipe that adds more strength and durability. The kit finishes off in massive 4-1/2” quad carbon fiber stainless steel clamp-on tips with a laser-etched aFe Power logo for the authentic and aggressive styling. aFe Power part number 49-34127NM-C is specifically designed for vehicles without NPP dual mode exhaust valves. For vehicles equipped with NPP valves, the dual mode exhaust valves will be eliminated.

This kit comes with all necessary hardware and step-by-step installation instructions for a hassle-free install. The aFe Power Muffler Delete Cat Back System is designed for a custom fit, bolt-on installation using factory style flanges and hangers, without cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This C8 Corvette aFe Muffler Delete Exhaust System - Carbon Fiber Tips is proudly designed and manufactured in their Corona, California, USA facility and comes with a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

The C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built to offer powerful strength, sound, and performance. aFe Power utilized only the most innovative CAD technology for its race-proven design and the finest stainless steel for its robust construction. If you’re thinking of dumping your restrictive set up, this is the best upgrade your money can buy.

This Cat-back C8 Corvette AFE Exhaust System features 3” – 2-1/2” mandrel bent pipes made from solid, austenitic 304 stainless steel for unrivaled strength and long-lasting durability. The muffler delete design will unleash more horsepower and torque while producing crisp, aggressive exhaust note without droning. This C8 Corvette aFe Muffler Delete Exhaust System - Black Tips is built with a mitered merge x-piper that evenly distributes and balances exhaust pulses across the entire system to optimize scavenging and diminish drone. The entire kit is 100% TIG welded and features heavy duty interlock flex pipe for greater strength and reliability. As the finishing touch, the pipes exit into massive quad 4 ½ in. stainless steel tips with black metallic finish laser etched with the aFe Power logo for the stealth look. aFe Power part number 49-34127NM-B is intended for vehicles without NPP dual mode exhaust valves. For applications with NPP valves, the dual mode exhaust valves will be eliminated.

C8 Corvette AFE Exhaust System is precision designed for a custom, high tolerance fitment on your vehicle. It uses factory style flanges and hangers for a secure fit, no welding or modification required. The kit includes all necessary hardware and comprehensive instructions for a complete and easy install. AFE 49-34127NM-B includes factory style exhaust valves (using factory motor, not included). All AFE performance parts and accessories are manufactured in their Corona, California, USA facility. AFE Mach-Force XP systems are backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette 49-34124-P AFE Exhaust System

Add power and performance to your C8 Corvette Stingray with an aFe Mach Force XP Exhaust System. The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Polished Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on Polished tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-P is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System was manufactured as a direct-bolt on installation to your C8 Corvette Stingray, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. 

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette Stingray AFE Exhaust System

aFe Power utilized the latest in CAD technology and only the highest quality metal construction to offer the race-proven design and superior performance of the C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips. The in-house experts at AFE dyno-tested this C8 Corvette exhaust upgrade and has proven to produce up to additional 9 HP and 10 lbs./ft. torque.

The power-boosting abilities of this Cat-back C8 Corvette Stingray AFE Exhaust System starts with premium quality its 3”-2-1/2” mandrel bent 304 stainless steel tubing with brushed finish. Built with very robust construction with the smooth mandrel bends to reduce restrictions, your new V8 will get massive exhaust flow, greatest performance gains, and improved engine efficiency. This C8 Corvette aFe Mach Force-Xp Exhaust System - Black Tips also produces a powerful sound that unleashes more horsepower and torque with its high-temperature, high-flow muffler. The loud and crisp performance growl produced by the AFE muffler does not come with the annoying drone because of the integrated X-pipe that balances and equally distributes pulses throughout the system.  The AFE muffler features a black metallic finish that does not just add a stealth-look but also protects against corrosion damage. This AFE Mach-Force Cat Back System for the C8 Corvette features a heavy duty interlocking flex pipe for added durability and strength. This kit ends in a massive 4-1/2 in. quad stainless steel clamp-on tips with a laser-etched aFe Power logo for great authentic style. AFE 49-34124-B is designed to fit vehicles with NPP dual mode exhaust valves only. The NPP valves comes with the Z51 performance package or the factory performance exhaust option.

The C8 Corvette Stingray AFE Exhaust System is designed for a direct-bolt on installation to your C8 Corvette, using factory style flanges and hangers, no cutting or modifications required. It comes with factory style exhaust valves using factory motor, not included in the kit. This product comes with a limited 2-year warranty. All AFE Power performance parts are proudly designed and manufactured in their Corona, California, USA facility.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing. 

C8 Corvette AFE Exhaust System

C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips is a great performance upgrade for your restrictive factory setup. This high quality exhaust kit is exactly what your Corvette needs to achieve increased flow, powerful sound, more horsepower, torque and improved performance. This C8 Corvette AFE Exhaust System is dyno-tested in-house and produced up to 9 HP and 10 lbs./ft torque in performance gains.

The Mach Force-XP system is built of 3” – 2-1/2” mandrel bent 304 grade stainless steel pipes for extreme strength and reliable performance. This cat-back exhaust is crafted using the latest in CAD technology and then TIG welded for the custom fit and race-proven design. The brushed finish adds more durability, sleek look, and maximum corrosion resistance. It features a stealth looking high-flow muffler that unleashes trapped horsepower and produces crisp, clean tone resounding power while minimizing drone. The AFE muffler comes with an integrated X-pipe that effectively balances and equally distributes pulses throughout the entire system, resulting to diminished drone and maximum scavenging abilities. This muffler is finished with a high-temperature metallic black coating for long-lasting durability. For more strength and durability, the C8 Corvette aFe Mach Force-Xp Exhaust System - Carbon Fiber Tips utilize a robust flex pipe with internal interlock liner. AFE 49-34124-C only fits C8 Corvettes with NPP dual mode exhaust valves, included in the factory performance exhaust option and the Z51 performance package. It uses factory style valves (using factory motor, not included).

The C8 Corvette AFE Exhaust System is supplied with all necessary hardware and step-by-step installation instructions for a complete install. This direct bolt-on system utilizes the factory style flanges and hangers for a hassle-free installation, no welding or any modification required. All AFE products are never outsourced, they are proudly designed and manufactured in Corona, California, USA. This aFe Mach Force-Xp Exhaust System for the C8 Corvette is backed by a limited 2-year warranty.

Free Shipping

Fitment: 2020, 2021 C8 Corvette Stingray

Product Note: Please allow for 7-10 Business Days for manufacturing.