Corvette Parts and Accessories

Injen C7 Corvette Cold Air Intake

The Injen Evolution Cold Air Intake for the C7 Corvette Z06 is engineered to maximize airflow for significant your engine’s horsepower and torque gains. This sleek intake kit drops directly into the factory mounting locations to add some great powerful looks under the hood. Using the most advanced CAD (Computer Aided Design) software, this induction system delivers outstanding heat insulation and durability while improving fuel economy. After extensive designing and dyno-testing, the C7 Corvette Z06 Injen Intake was proven to increase your engines power output up to additional 32 horsepower and 30 ft./lbs. of torque.

Injen EVO7203 has the perfect combination of superior filtration and massive air flow from its high-volume air filter and high-tech intake tube. It uses the SuperNano-Web Dry Air Filter, which is the largest possible filter for this application to achieve the highest cold air volume to supply the engine. It is not your ordinary filter as it comes with a built-in minder that shows when it’s time to change and for hassle-free inspections. The Roto-molded intake tube featuring a strong polyethylene construction offers great power gains while maintaining precise air and fuel ratio. You don’t have to worry about check engine lights after installation. Injen C7 Corvette Cold Air Intake also features a roto-molded housing for added engine protection and enhanced cold air flow

C7 Corvette Z06 Injen Intake is designed for a direct, bolt-on installation using existing factory mounting locations for the OE fit. The EVO7203 induction kit comes complete with stainless steel band clamps and reinforced automotive grade silicone coupler for an easy installation. With Injen’s patented tuning process, recalibration is not required for this Injen C7 Corvette Cold Air Intake. This kit is not legal for sale or use in California and in states that follows CARB standards such as NY and ME. The Evolution Series Induction system by Injen is proudly made in the USA and is backed by their limited lifetime warranty.

Free Shipping

Fitment: C7 Corvette Z06 (2015, 2016, 2017, 2018 and 2019)

C7 Corvette Grand Sport Ingen Intake EVO7202

C7 Corvette Grand Sport Ingen Cold Air Intake. The Injen EVO7202 for the 2017, 2018 and 2019 Grand Sport Corvette is the best bang for your buck out there. The Injen C7 Corvette Intake System is ROTOMOLDED and CAD designed to give you maximum air flow. The Cold Air Intake Tube uses a custom formed flow pattern to ensure that air is going past the MAF sensor at the right speed. No worries about this filter because it features a nao-filter and built in filter check reminder to alert you when the filter needs to be cleaned. Simply hose off, let dry and re-install. The C7 Corvette Injen Cold Air Intake is a direct bolt on installation and is designed to work with OEM stock calibration and does not require an aftermarket tune. Injen only uses high quality hardware, including stainless steel band clamps that have a protective inner liner and automotive grade silicone couplers that will stand the test of time. A direct bolt on replacement for stock intake, installation only requires basic hand tools and does not require any drilling or permanent modification to your car. Installation can be done in about an hour and only requires moderate mechanical skills. Injen Intakes are backed by their limited lifetime warranty against defects in material and craftsmanship. Get Dyno tuned and proven performance with the C7 Corvette Grand Sport Ingen Cold Air Intake

Injen EVO72002

Free Shipping

Fitment: 2017, 2018 and 2019 C7 Corvette Grand Sport Coupe and Convertible with Manual or Automatic Transmission 

Product Note: Not Legal for sale in the State of California

C7 Corvette Stingray Ingen EVO7202

C7 Corvette Stingray Ingen Cold Air Intake. The Injen EVO7202 for the 2014, 2015, 2016, 2017, 2018 and 2019 Stingray Corvette is one of the best Intakes for the money. The Injen C7 Corvette Intake System is CAD designed and flow bench tested to give you maximum air flow. The ROTOMOLDED Intake Tube uses a calibrated flow pattern to ensure that the air being read by the MAF sensor is going past at the correct rate. The filter features nao-filtration and has a built in filter check reminder to alert you when it's time to clean the filter. The synthetic filter is easy to clean, simply wash with mild soap and water, let dry and re-install. The C7 Corvette Stingray Injen Cold Air Intake is a direct OEM replacement and is designed to work with OEM stock calibration and does not require an aftermarket tune. Injen uses best quality hardware, including stainless steel band clamps that have a protective inner liner and automotive grade silicone couplers that will stand the test of time. Installation only requires basic hand tools and can be done at home. There is no permanent modification to your car and this modification can be easily reversed at a later date. Installation about an hour and only requires basic mechanical skill. Injen Stingray Intakes are backed by their limited lifetime warranty against defects in material and craftsmanship. When you are looking for the best bang for your buck, then it has to be the C7 Corvette Stingray Ingen Cold Air Intake

Injen EVO72002

Free Shipping

Fitment: 2014, 2015, 2016, 2017, 2018 and 2019 C7 Corvette Stingray with Manual or Automatic Transmission 

Product Note: Not Legal for sale or use in the State of California (Not CARB Compliant)