Corvette Parts and Accessories

BMC C5 Corvette High Flow Air Filter

Replace the old worn out air filter in your C5 Corvette with a High Flow Filter from BMC. Made of a multi-layered cotton fabric soaked in low-viscosity oil, BMC Corvette Air Filters are inserted between two aluminum mesh frames. The aluminum mesh is coated with epoxy resin in order to protect it against oxidation caused by fuel vapors and the humidity present in the air. Cotton encourages the passage of a large air flow and is able to stop all impurities from 7 micron on up. Currently, this concept is the best solution for both a more effective filtration and for higher performance.

Fitment: 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 C5 Corvette, Coupe, Convertible, FRC and Z06 

SLP Blackwing Cleaning Kit 25017

Air Filter Cleaner and Oil Kit from SLP. Keep your SLP Blackwing Air Filter clean with an official kit from Street Legal Performance. Properly clean and oil your Blackwing Air Filter with this kit from SLP. The Blackwing Air Filter Cleaner and Oil Kit is designed specifically for the special synthetic media in the Blackwing Air Filters (unlike most other air filter which use ordinary cotton fiber). Maintaining your air filter properly will give you maximum filtration and life. and unrestricted flow.

C5 Corvette Green Performance Air Filter

C5 Corvette Green Filter 2021. Get the best filtration and the most power out of your Air Filter with the C5 Corvette Green Filter. Designed and manufactured by race teams and engine builders for the high demands of the race track. Increases the overall surface area by 20% and increases air flow for maximum power gains. P/N 2021

Fitment: C5 Corvette Coupe, Convertible, Z06 and Fixed Roof Coupe. 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

2702 MSD Atomic Airforce Intake Manifold - C5 Corvette LS1 - LS6

C5 Corvette MSD Atomic Airforce Intake Manifold for your LS1 or LS6 powered Corvette. The all new MSD Airforce Intake Manifold delivers maximum airflow and distribution to improve the performance of your stock or modified LS1/LS6 Engine. This C5 Corvette Intake Manifold was designed, engineered and produced from the ground up, using Computational Fluid Dynamic Modeling to address the OEM intakes performance short comings giving you optimized airflow and solid performance gains across the RPM range. MSD was able to optimize the plenum volume and re-arrange the runner layout, giving you better air flow, less resistance and more horsepower. The unique bell mouthed runner openings, optimized length and minimal shrouding insure proper airflow and cylinder balance. The MSD Atomic Airforce Intake Manifold for the C5 Corvette is a two piece glass reinforced polymer design which allows for custom port matching, reduces overall weight and reduces power robbing heat soak. C5 Corvette MSD Atomic Airforce Intake Manifold accepts the OEM Electronic throttle body, as well as performance throttle bodies up to 103mm. Make more horsepower and torque with the MSD Atomic Airforce Manifold, Dyno testing shows 25+ Horsepower and 20+ ft/lbs of Torque gains just from bolting on this impressive intake manifold and more power can be found in highly modified engines. The Atomic Airforce Manifold is 50 State Legal, so this is a great modification for people living in CARB Certified States. Give your C5 Corvette or Corvette Z06 the extra power you are looking for with an MSD Atomic Airforce Intake Manifold. P/N 2702

Fitment: C5 Corvette LS1 Engine and C5 Corvette Z06 LS6 (1997 - 2004)

Product Note: Legal for sale in California: C.A.R.B Certification EO #D-722-1

C5 Corvette Throttle Body

BBK C5 Corvette Throttle Body - LS1 - 80mm. Improve the airflow and throttle response on your C5 Corvette LS1 with a BBK Throttle Body. This Throttle Body is manufactured with cast aluminum and includes new gaskets. Designed and engineered specifically for the C5 Corvette LS3. PN 1708. 50 State Legal CARB #D-245-17

Fitment: C5 Corvette LS1 (1997 - 2004)

C5 Corvette Vararam Intake and Power Duct Combo

Vararam VR-B2 +VRPD Combo - C5 Corvette. The Vararam VR-B2 system for the C5 Corvette has evolved several times over the years for added performance and ease of filter maintenance. In the latest evolution,of this record setting system VaraRam has made advancements for both quality and ease of installation. Combined with the Vararam VRPD Power Duct, this is one combo you can't do without.

Fitment: C5 Corvette (1997 - 2004)

Product Note: Includes (1) Vararam VR-B2 and (1) Vararam VRPD Power Duct

C5 Corvette Volant Intake

Volant Cold Air Intake - C5 Corvette. Volant Intakes are constructed of cross linked polymers that make this one of the sturdiest intakes you can buy for your C5 Corvette, and is a favorite of Corvette enthusiasts that track their car. This Volant Cold Air Intake uses a cleanable and re-usable five layer high velocity cotton filter that provides 99.97% particle filtration. When you need your intake to perform under the harshest conditions, it has to be Volant.

Fitment: C5 Corvette and Z06 (1997 - 2004)

C5 Corvette Vararam Power Duct

Vararam VR-C5PD Power Duct - C5 Corvette. The Vararam VR-C5PD Power Duct replaces the restrictive air bridge on your C5 Corvette and Z06. The Power Duct flows over 25% more efficient than the OEM Air Bridge, allowing for higher throttle body pressure and increased air volume. 

Fitment: C5 Corvette and Corvette Z06 (1997 - 2004)

C5 Corvette Vararam VR-B2 Ram Air Intake System

 C5 Corvette Vararam Cold Air Intake. The Vararam VR-B2 is the only true Cold Air Intake System designed and engineered for the C5 Corvette. Vararam's unique design funnels cold air from the Fog Light Ducts in the front of your C5 Corvette straight up to your intake manifold. The term CAI (Cold Air Intake) is often applied to any aftermarket intakes system, however only Vararam delivers cooler outside air. Cooler air is denser and makes more horsepower. In addition, when your C5 Corvette is moving forward, you get all that cool dense air under RAM Air pressure. Included in your kit are a full set of instructions and everything you will need for installation.  VR-B2

The C5 Corvette Vararam Intake is manufactured in Ixonia Wisconsin and has been a staple in the Corvette Intakes since its inception. The Vararam Intake system for the C5 Corvette has evolved several times over the years for added performance and ease of filter maintenance. In the latest evolution,of this record setting system VaraRam has made advancements for both quality and ease of installation. Installation of this intake is a tricky proposition. The front of the air scoops attach behind the fog light openings, which is a very tight fit and a blind install (touch location) as seeing the mounting locations inside the front fascia is very difficult. A lift is recommended for visual assistance but is not necessary. While installation can be a little frustrating due to the tight spaces and limited visibility, it is well worth the effort. The C5 Corvette VaraRam Intake continues to be one of the most effective ways to add Horsepower and Torque to your 5th Generation Corvette.

Fitment: C5 Corvette and Corvette Z06 (1997 - 2004)

Braided Hose - C5 Corvette. 3 Feet of Braided Hose to accessorize your Custom Corvette Accessories Billet Aluminum, Chrome and Black Chrome PCV Oil Catch Can. 

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Fits Custom Corvette Accessories PCV Oil Catch Cans

C5 Corvette Cold Air Intake K&N 57-3020

Upgrading to a new K&N FIPK Series Cold Air Intake is one of the best decisions you will ever make to achieve more horsepower and peak engine performance. Designed using a dynamometer and rigorously tested by racers, installing the FIPK (Fuel Injection Performance Kit) can instantly guarantee up to 10% more horsepower to your Vette. Additionally, your C5 Corvette LS1 and LS6 gets maximum engine protection against particles from the best air filter in the world, the K&N air filter. Designed to replace your vehicle’s factory air intake system and all its power-robbing air flow restrictions, the FIPK or 57 Series C5 Corvette K&N Intake will deliver more horsepower and torque throughout the RPM range.

The intake tube and the air filter combination in the 57 Series C5 Corvette Cold Air Intake will make your engine gulp more, cooler, and cleaner air. The enormous Filtercharger air filter has oiled, multiple cotton gauze filter media allows more air to flow through while absorbing all dirt particles to prevent internal engine damage. The K&N air filter in part number 57-3020 is washable and reusable, it can go up to 100,000 miles under normal driving conditions before needing filter services. The K&N 57 Series Cold Air Intake uses a rotationally molded HDPE (High Density Polyethylene) tube that increases and cools air flow better than metal tubes. K&N Cold Air Intake for C5 Corvette comes with a custom heat shield to protect the air filter from the heat in the engine bay.

K&N 57-3020 C5 Corvette Cold Air Intake is supplied with stainless steel clamps, couplers, and installation instructions for a complete DIY installation in less than 90 minutes. It is backed by K&N’s 10-year/million-mile warranty or basically for the entire life of your vehicle. The C5 Corvette K&N Intake is CARB exempt and is legal for use in all 50 states.

Free Shipping

Fitment: C5 Corvette (1997 - 2000)

Product Note: Street Legal in all 50 States (Including California)8

C5 Corvette 63-1050 K&N Cold Air Intake

63-1050 K&N Intake System - C5 Corvette. The K&N 63 Series Intake kits for C5 Corvettes are truly state-of-the-art. K&N starts with the largest conical shaped High-Flow air filter we can fit into the  engine compartment while using factory holes and  mounting  points. This extra filter size provides even more airflow at lower restriction than a standard  K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). The filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next we attach the filter to a rotatary molded tube  made from interlaced High Density Polyethylene. This process  allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of our tubes have unique  shapes or indentations that are specifically engineered for each Corvette application. Finally the tube is connected to  the engine with adapters made from high strength materials such as silicon and  reinforced nylon and ensures long life. Put all this together and you have the best Corvette C5 high-flow intake system available today. C5 Corvette K&N 63-1050

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California. 

C5 Corvette K&N Air Filter 33-2111

K&N Replacement Air Filter - C5 Corvette. Designed and Engineered specifically for the C5 Corvette this K&N Air Filter will improve air flow, boost horsepower and rate of acceleration. Washable and re-usable, this C5 Corvette K&N Air Filter is backed by their Million Mile Warranty. 33-2111

Fitment: C5 Corvette (1997 - 2004)

C5 Corvette K&N Intake 57-3035

57-3035 K&N Intake - C5 Corvette. The 57 Series Generation II C5 Corvette air intake, also referred to as an FIPK, is K&N's ultimate performance product. This Corvette performance intake is designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with a Million Mile Limited Warranty. K&N air intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This translates into more power and torque for your vehicle. The filters on these kits are washable and reusable. Simply wash with mild soap and water, rinse, let dry and lightly re-oil.
K&N Engineering is based in Riverside California in a sprawling 400,000 square foot facility that boast some of the world most advanced flow testing and design equipment, giving you the peace of mind that comes with a world renowned company that has proven themselves in the lab, on the street and the race track. The 57 Series K&N C5 Corvette Cold Air Intakes are California CARB Certified. That means that the K&N Intake 57-3035 is street legal in the state of California and comes with a CARB Sticker for hassle free use anywhere in the Country. This C5 Corvette K&N Intakes was specifically designed for the 2001, 2002, 2003 C5 Corvette and can be installed with basic hand tools and limited mechanical knowledge. Each Cold Air Intake from K&N for the C5 Corvette comes with a complete set of instructions and all necessary hardware for installation. 

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: For model years (1997 to 2000) use part number 57-3020

Product Note: Street Legal in all 50 States (Including California) CARB EO Number D-269-28

C5 Corvette Halltech Venom V2024

Halltech Venom Cold Air Intake - C5 Corvette. The Venom is cut from the cloth of the all new Killer Bee II Z06 Cold Air Induction System this second generation intake flows more air than any induction system on the market.  It utilizes the stock Mass Air Flow sensor for easy installation and seamless smooth response on the street or at the track. Starting with the Killer Bee II 15" wide Halltech filter with a built in velocity stack flange, the actual changes to our mold design have increased flow to the throttle body. The filter is designed by Halltech but made by K&N exclusively for Halltech's Killer Bee II. The bridge is also made from the new KB II mold which dynoed over 15 HP on the Katech Engine Dyno. The filter can be cleaned with the K&N cleaning kit found at all automotive parts stores. Includes Honeycomb air straightener. V2024

The C5 Corvette Halltech Venom Intake is designed and engineered in Halltech's manufacturing and production shop in Ixonia, Wisconsin. Each Halltech C5 Corvette Intake is a straight bolt on application and can be done with basic hand tools in about an hour. Included is a full set of color instructions and every thing you will need to complete the installation. Installing a Halltech Cold Air Intake will not cause a check engine CEL and does not require an aftermarket tune. Give your Corvette a breath of fresh air, improved throttle response, better air flow and gas mileage with the C5 Corvette Halltech Venom Intake System.

Free Shipping

Fitment: C5 Corvette and Z06 (2001 - 2004)

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 863-042

Airaid C5 Corvette Warhead Filter. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Warhead Intake Filter. Each Filter is a direct replacement and bolts directly to your stock air bridge. This Airaid High Flow Warhead filter improves gas mileage and throttle response. The re-usable Synthetic Filter can be washed, dried and re-installed, making this a great bang for the buck. Blue Filter 863-042

Free Shipping

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 861-042

Airaid C5 Corvette Warhead Filter. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Warhead Intake Filter. Each Filter is a direct replacement and bolts directly to your stock air bridge. This Airaid High Flow Warhead filter improves gas mileage and throttle response. The re-usable Synthetic Filter can be washed, dried and re-installed, making this a great bang for the buck. Red Filter 861-042

Free Shipping

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 862-042

Airaid C5 Corvette Warhead Filter. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Warhead Intake Filter. Each Filter is a direct replacement and bolts directly to your stock air bridge. This Airaid High Flow Warhead filter improves gas mileage and throttle response. The re-usable Synthetic Filter can be washed, dried and re-installed, making this a great bang for the buck. Black Filter 862-042

Free Shipping

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 860-042

Airaid C5 Corvette Warhead Filter. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Warhead Intake Filter. Each Filter is a direct replacement and bolts directly to your stock air bridge. This Airaid High Flow Warhead filter improves gas mileage and throttle response. The re-usable oiled filter can be washed, re-oiled and re-installed, making this a great bang for the buck. Red Oiled Filter 860-042

Free Shipping

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 253-292

Airaid C5 Corvette Intake. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Intake. Each Intake is manufactured with high density Polyethylene for a durable construction that will not crack or collapse. Dyno tested to add 12 Horsepower and 13 Ft/Lbs of Torque, this Airaid Intake uses a New Age Synthetic Filter that can be washed, dried and used over and over again. Replaces the Stock C5 Corvette Intake and can be easily installed using basic hand tools. Blue Filter 253-292

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 252-292

Airaid C5 Corvette Intake. Give your C5 Corvette LS1 and LS6 some fresh air with this Airaid C5 Corvette Intake. Each Intake is manufactured with high density Polyethylene for a durable construction that will not crack or collapse. Dyno tested to add 12 Horsepower and 13 Ft/Lbs of Torque, this Airaid Intake uses a New Age Synthetic Filter that can be washed, dried and used over and over again. Replaces the Stock C5 Corvette Intake and can be easily installed using basic hand tools. Black Filter 252-292

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette Airaid 251-292

The Airaid Synthamax MXP Series Cold Air Intake will feed your C5 Corvette LS1 and LS6 engines with more air for more power and performance. It is Airaid’s ultimate air induction upgrade for your Chevy with its sophisticated system that allows for up to 20% more air flow that translates up to additional 20 horsepower and 20 lbs. more torque. Not just that, C5 Corvette Airaid Intake can also improve your gas mileage by up to 2 mpg, depending on driving conditions. The Airaid Cold Air Intake part number 251-292 is built specifically to fit and improve the performance of your Chevrolet C5 Corvette.

Airaid Synthamax MXP Series C5 Corvette Cold Air Intake kit features the powerful synergy of a premium air filter and a computer-modeled intake tube. It comes with the red oiled Synthamax series air filter that is washable and reusable. The oiled synthetic filter media does not just offer superb filtration efficiency against dirt and grimes, it also allows maximum flow of cooler air to your engine. The intake tube boasts a cross-linked, High Density Polyethylene (HDPE) construction that has been extensively computer molded for accurate MAF readings and calibration. The high-tech filtration technology plus max-flow design will surely rev up your LS1 or LS6 engine, something your factory set up can never do.

The Airaid MXP Series C5 Corvette Cold Air Intake is easy to install using common garage tools. No recalibration is required after installation because it has provisions for the factory MAF, crankcase vent tube, and inlet air temperature sensor. It comes complete with stainless steel worm gear clamps, couplers, hardware, and detailed instructions. Airaid Cold Air Intake for C5 Corvette is CARB compliant, it is legal for sale or use in California and other states that follow CARB standards (CARB EO: D-609-14). All Airaid Cold Air Intake Systems are designed and manufactured in the USA. Each Airaid C5 Corvette Cold Air Intake is covered by a Lifetime Warranty.

Fitment: C5 Corvette and Z06 - 2001, 2002, 2003 and 2004

Airaid C5 Corvette Cold Air Intake

The Airaid MAXP Air Intake System will greatly improve your engine’s power and acceleration by delivering maximum cold air flow. It is built with an innovative dam design that effectively keeps engine heat away, allowing more cold air to flow through. Designed to directly bolt-on in place of the OE air filter, this Cold Air Intake for C5 Corvette models went through intensive computer modeling to maintain proper air/fuel ratios and calibrations. C5 Corvette Airaid Intake combines efficient filtration and high-flow design for higher horsepower and torque gains. This Cold Air Induction system designed specifically for the Chevy C5 Corvette can add up to 13 horsepower, 14 ft/lbs. of torque, and 1-2 mpg improvements in gas mileage.

Airaid C5 Corvette Cold Air Intake utilize a massive 360-degrees conical air filter that is less restrictive than conventional paper filters and offer 99.99% filtration efficiency. The SynthaFlow oiled cotton gauze filter guarantees superior filtration and air flow throughout the life of your vehicle. This easy-to-clean filter is completely washable and reusable for miles and miles of use. C5 Corvette Airaid Intake features a mandrel-bent intake tube with a cross-linked high-density polyethylene construction for increased air flow and proper air fuel ratios. It is powder-coated inside out for added protection and great looks. Airaid 250-292 offers provision for factory MAF sensor, inlet air temperature sensor, and crankcase vent tube.

Airaid C5 Corvette Cold Air Intake is high-quality performance upgrades to the stock air filter and intake tubing. It comes with installation instructions and allows for a direct-bolt on installation using common garage tools, no-recalibration required. Airaid part number 250-292 is legal for sale or use in California and other states that follow CARB standards like NY and ME, EO Number: D-609-14. This new Air Induction System for the Chevy C5 Corvette is backed by a limited lifetime warranty.

Fitment: C5 Corvette 2001, 2002, 2003, 2004

Product Note: Not legal for Highway use in States adopting California emissions standards. Not legal for sale in California.

C5 Corvette aFe Intake 51-10052

C5 Corvette Cold Air Intake - aFe Magnum Force Pro Dry S. Designed specifically for the C5 Corvette LS1 and LS6 Engines, this advanced Flow engineering Intake system boasts +24 Horsepower and 29 Ft/Lb of Torque. Manufactured with Vacuum Formed ABS Plastic and a Roto-Molded Intake Tube, you can be sure this intake will last a lifetime. The Pro Dry S uses a 360 degree radial flow Oiled Filter with a 5 layer mesh cotton media that can be washed, dried, re-oiled and used again and again. All clamps and hardware are included and this C5 Corvette Intake and it does not does not require any drilling or modification to your car. 54-10052

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

C5 Corvette aFe Intake 54-10052

C5 Corvette Cold Air Intake - aFe Magnum Force Pro 5R. Designed specifically for the C5 Corvette LS1 and LS6 Engines, this advanced Flow engineering Intake system boasts +24 Horsepower and 29 Ft/Lb of Torque. Manufactured with Vacuum Formed ABS Plastic and a Roto-Molded Intake Tube, you can be sure this intake will last a lifetime. The Pro 5R uses a 360 degree radial flow Oiled Filter with a 5 layer mesh cotton media that can be washed, dried, re-oiled and used again and again. All clamps and hardware are included and this C5 Corvette Intake and it does not does not require any drilling or modification to your car. 54-10052

Free Shipping

Fitment: C5 Corvette and Z06 - 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004