C7 Corvette AMT Motorsport Adjustable Camber Kit (2014-2019)

AMT Motorsport Adjustable Camber Kit for C7 Corvette

The AMT Motorsport Adjustable Camber Kit fits 2014–2019 C7 Corvette Stingray, Grand Sport, Z06, and ZR1 models with the LT1 6.2L, LT4 6.2L supercharged, or LT5 6.2L supercharged engine. Choose part number 267013 for the camber kit or part number 267013S for the kit with front and rear upper-control-arm studs. Designed for performance street driving, autocross, and track use, the indexed front and rear camber plates replace the factory round eccentric adjusters to provide more repeatable alignment settings and additional tuning range.

Product Details

• Brand: AMT Motorsport
• Camber Kit Part Number: 267013
• Camber Kit With Studs Part Number: 267013S
• Product: Adjustable Front and Rear Camber Kit
• Vehicle: 2014–2019 C7 Corvette
• Adjustment Position: Front and rear lower control arms
• Plate Adjustment: Six indexed adjustment levels
• Fine Adjustment: Front and rear upper-control-arm shims included
• Plate Material: 6061-T6 aluminum
• Finish: Red anodized
• Markings: Laser-engraved adjustment references
• Stud Option: Front and rear upper-control-arm studs included with part number 267013S
• Instructions: Full-color installation and adjustment guide included
• Warranty: AMT Motorsport lifetime guarantee

Benefits

• Replaces the factory round camber eccentrics with defined indexed adjustment positions
• Provides repeatable front and rear camber settings for street and track alignments
• Helps reduce unwanted alignment movement during hard cornering and repeated track sessions
• Provides additional negative-camber range compared with the factory adjustment system
• Allows camber changes without swapping multiple fixed adjustment plates
• Includes upper-control-arm shims for finer camber and caster tuning
• Uses laser-engraved markings to make alignment settings easier to record and repeat

Important Notes

• Installation requires cutting the front-most bolt on the rear lower control arm for removal and installation clearance.
• A complete professional four-wheel alignment is required after installation.
• Rear caster must be measured and adjusted carefully when changing rear camber settings.
• Choose part number 267013S when frequent upper-control-arm shim changes are planned.
• Part number 267013 is normally appropriate when the Corvette will use one primary alignment setup and receive infrequent changes.
• Aggressive rear camber settings may exceed the adjustment range of the factory rear toe links.
• Adjustable rear toe links may be needed when running more than approximately negative two degrees of rear camber.

CORVETTE COMPATIBILITY

• Generation: C7 Corvette
• Model Years: 2014–2019
• Models: Stingray, Grand Sport, Z06, and ZR1
• Engines: LT1 6.2L, LT4 6.2L Supercharged, and LT5 6.2L Supercharged
• Body Styles: Coupe and Convertible
• Transmissions: Manual and Automatic

Use Overview

The factory C7 Corvette camber eccentrics provide convenient adjustment, but aggressive cornering loads, sticky tires, and repeated track use can make consistent alignment settings more difficult to maintain. The AMT Motorsport Adjustable Camber Kit replaces those round eccentrics with indexed plates that give alignment technicians defined positions for setting and documenting front and rear camber. Included upper-control-arm shims provide the finer adjustment needed to balance camber and rear caster.

Why Buy This AMT Motorsport C7 Corvette Camber Kit?

The AMT Motorsport C7 Corvette Camber Kit combines indexed 6061-T6 aluminum adjustment plates, laser-engraved reference markings, front and rear upper-control-arm shims, and an optional complete stud package. The result is a purpose-built alignment system for Corvette owners who want greater adjustment range, more repeatable settings, and better control over street, autocross, and track alignment changes.