Corvette Exhaust Systems

C8 Corvette Stingray Borla S-Type Carbon Fiber Exhaust

C8 Corvette Borla S-Type Exhaust 140838CF is built with you in mind. Massive 4 inch Carbon Fiber Tips offer a modern appearance. The S-Type offers a sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. The new C8 Corvette Stingray is designed like a modern jet fighter. The C8 is Military influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type Carbon Fiber Exhaust provides an exciting interior and exterior experience without the drone you may have heard from other Corvette exhaust systems

The S-Type Exhaust design combines combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology use pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Heat shielding is included to prevent exhaust damage and protect your new Corvette. The Stingray Borla S-Type Carbon Fiber Exhaust is constructed using aircraft quality T-304 stainless steel and is backed by a Borla’s Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust with Carbon Fiber Tips is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla S-Type with Black Tips 

C8 Corvette Borla S-Type Exhaust 140838BC is built with you in mind. Massive 4 inch Black Tips offer an updated appearance. The S-Type sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. Enthusiast talk about the new C8 Corvette design being like a jet fighter, military aircraft-influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type with Black Tips provides a more exciting driving experience without the drone you may have heard from other aftermarket exhaust systems

The S-Type Exhaust design blends combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology uses pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. The Stingray Borla S-Type Cat Back Exhaust is constructed using T-304 stainless steel and is backed by Borla's Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla S-Type Cat Back Exhaust 

C8 Corvette Borla S-Type Exhaust 140838 is built with you in mind. Massive 4 inch Chrome Tips offer a traditional OEM look. The S-Type sound level delivers an assertive, yet balanced sound with a deep tone that matches up well to when you hear the sound from in the cockpit of your Corvette. Enthusiast talk about the new C8 Corvette design being like a jet fighter, military aircraft-influenced and this system is built with that in mind, to provide a corresponding sound to go with the thrill from the cockpit of your Stingray.

The C8 Corvette Stingray Borla S-Type Cat Back Exhaust provides a more exciting driving experience without the drone you may have heard from other aftermarket exhaust systems

The S-Type Exhaust design blends combustion pulses from both sides of the engine for improved performance and a custom sound. Polyphonic Harmonizer and SwitchFire™ technology uses pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. The Stingray Borla S-Type Cat Back Exhaust is constructed using T-304 stainless steel and is backed by a Million Mile Warranty.

This C8 Corvette Borla S-Type Aftermarket Exhaust is the upgrade you have been looking and you will appreciate the high quality of Borla's precision manufacturing.  

Fitment: 2020, 2021, 2022, 2023 and 2024 C8 Corvette Stingray 

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK with Carbon Fiber Tips

C8 Corvette Borla ATAK Exhaust 140839CF is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK with Carbon Fiber Tips designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual Carbon Fiber Tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839CF with carbon fiber tips.

Fitment: 2020, 2021, 2022, 2023 and 2024 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust 

C8 Corvette Borla ATAK Exhaust 140839BC is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual rolled and angle cut Black Chrome tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839BC with Black Chrome tips

Fitment: 2020, 2021, 2022, 2023 and 2024 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust 

C8 Corvette Borla ATAK Exhaust 140839 is built with you in mind. Rumors began a few years back Chevrolet may go full performance with a mid-engine design with the C8. This presented engineers with unique challenges due to mid-engine movement. This model features the ATAK® sound level, Borla's most aggressive sound for Chevy's most aggressive Corvette to date.

C8 Corvette Stingray Borla ATAK Cat Back Exhaust designers utilized Polyphonic Harmonizer and SwitchFire™ technology matching pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Feel free to unleash the beast as the ATAK design truly blends the combustion pulses from both sides of the engine for improved performance and a custom sound.

Strategically placed heat shielding is included to prevent exhaust heat damage and protect your C8 Stingray Corvette. It comes with 4" dual rolled and angle cut chrome tips. The system is manufactured using aircraft quality T-304 stainless steel and is backed by Borla’s Million Mile Warranty.

This C8 Corvette Stingray Borla ATAK Cat Back Exhaust is the upgrade you have been looking if you want an aggressive sound. ATAK Exhaust 140839 with chrome tips

Fitment: 2020, 2021, 2022, 2023 and 2024  Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive 2 Door.

Product Note: After installation of the C8 Corvette Stingray Borla ATAK Cat Back Exhaust, the controllers for the AFM and NPP valves in the exhaust system should be re-calibrated according to GM Document ID 5406413.

C7 Corvette Z06 - 22910 Borla S-Type Exhaust

The 11910 Borla S-Type is the more moderate of the Borla C7 Corvette Z06 line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla C7 Corvette Z06 S-Type axle back exhaust is for use on C7 Corvette Z06's with Standard Type Exhaust (Not NPP Valved Exhaust). This Borla C7 Corvette ZO6 Exhaust features the Dual 4.25" Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2015 - 2019) Corvette Z06 with Factory Standard Exhaust Option Only

Borla 11910 S-Type Axle Back Exhaust System - C7 Corvette Grand Sport

The 11910 Borla S-Type is the more moderate of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla C7 Corvette Grand Sport S-Type axle back exhaust is for use on C7 Corvette with Standard Type Exhaust (Not NPP Valved Exhaust). This Borla C7 Corvette GS Exhaust features the Dual 4.25" Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport with Factory Standard Exhaust Option Only

Borla S-Type 11908 C7 Corvette Z06

The 11908 Borla S-Type is the more moderate of the Borla C7 Corvette Z06 line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla C7 Corvette Z06 S-Type axle back exhaust is for use on C7 Corvette Z06's with Standard Type Exhaust (Not NPP Valved Exhaust). This Borla C7 Corvette Z06 Exhaust features the Dual 4.25" Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2015 - 2019) Corvette Z06 with Factory Standard Exhaust Option Only

Product Note:  Retains the AMF Valves

C7 Corvette Stingray - Borla 11877

The 11877 Borla S-Type is the more moderate of the Borla C7 Corvette line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla Stingray S-Type axle back exhaust is for use on C7 Corvettes with Standard Type Exhaust (Not NPP Valved Exhaust). This Borla C7 Corvette Exhaust features the Dual 4.25" Round Rolled Angle Cut Long Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Retains the AMF Valves

Borla S-Type 11874

The 11874 Borla S-Type is the more moderate of the Borla C7 Corvette line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla Stingray S Type axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a more mellow ride. This Borla C7 Corvette Exhaust features the Dual 4.25" Round Rolled Angle Cut Long Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory NPP Exhaust Option Only

C7 Corvette Grand Sport Borla S-Type 11874

The 11874 Borla S-Type is the more moderate of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound when you step on the gas, but quiets down when you are light on the throttle.. The Borla Grand Sport S Type axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a more mellow ride. This Borla C7 Corvette Exhaust features the Dual 4.25" Round Rolled Angle Cut Long Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport with Factory NPP Exhaust Option Only

C7 Corvette Borla 11862

Every year, millions of exhaust system gets replaced due to poor performance and rust. That will not be a problem if you invest in a brand new Borla Axle Back S-Type Exhaust System for your C7 Corvette. For decades, the name Borla has been equivalent to world-class quality and incredible performance because their engineers use only the finest materials and the most innovative technology. If you want a system that will completely overhaul your Vettes performance and is worth every penny, the C7 Corvette Borla S-Type is made exactly for you.

What makes the C7 Corvette Borla 11862 Axle Back exhaust system an outstanding investment is its heavy-duty stainless-steel construction. It’s not aluminized steel, not mild steel, but solid 100% aircraft quality austenitic T-304 grade stainless steel. This metal won’t get damaged nor corrode from the inside or from road salt, chemicals, and harsh vibrations unlike other brands. The C7 Corvette Borla S-Type system will be the last exhaust system you will buy for your car. It uses the patented straight-through, multi-core muffler that improves exhaust velocity for tremendous horsepower gains. Being the second loudest series in Borla’s line up, the S-series will deliver high quality performance oriented sound that is aggressive on the gas and quieter when light on the throttle. This Axle Back Exhaust System for the C7 Corvette is designed with mandrel-bent tubes with optimized diameters for the smoothest flow and maximized velocity. Borla 11862 features 2.75 in. tubing diameter with massive 4.25 in. quad dual round rolled angle-cut intercooled tips.

The C7 Corvette Borla 11862 axle-back system comes complete with all necessary hardware, clamps, and connectors. It allows for a direct-bolt on installation using factory exhaust mounting locations. Like all their systems, part number 11862 is backed by Borla’s million-mile warranty. The Borla S-type Exhaust System for the C7 Corvette is street legal in all 50 states and is proudly made in the USA.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Retains the AMF Valves

C7 Corvette Stingray Borla Exhaust System

C7 Corvette Borla S-Type 11855 with NPP Exhaust is designed for the 2014-2019 Chevrolet Corvette (C7) Stingray with a 6.2L V8 engine in either an Automatic or Manual Transmission with AFM With NPP Dual Mode Exhaust.  

**This Axle-Back system if for cars equipped both AFM and NPP Valves excluding the Grand Sport With Manual Transmission.

With over 40 years of experience, Borla is very good at making high-quality exhaust systems and Corvette is a model that they specialize in. Best of all, BORLA exhaust systems are certified street legal in 50 states and will not violate factory or dealership warranties. This S-Type system delivers an exhaust note that's aggressive, but not the loudest of the Borla lineup.

The C7 Corvette Stingray Borla Exhaust System will deliver the expected performance gains of all Borla kits and is manufactured using 2.75 stainless steel mandrel bent tubing that will allow for a smooth exhaust flow, creating improved horsepower and torque. Each muffler provides a single 2.75 inch inlet and dual 2.0-inch exit before the added 4.25-inch Dual Round Rolled Angle-Cut Intercooled Tips that creates the Quad Center Rear Exit classic look. Intercooled tips are made from 2 pieces of tube. The inside is flared to meet the outside. There is a small gap between the tubes that acts as a buffer for heat. Think of it as a dual pane window. The inside tube gets all the exhaust heat and the outside stays about half the temperature.

Installation of the C7 Corvette Borla S-Type with NPP Exhaust is best left to the professionals. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your C7 Stingray Exhaust System.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory NPP Dual Mode Exhaust

Product Note: *The rear valence must be removed to complete the installation.

C7 Corvette Grand Sport Borla Exhaust System

C7 Corvette Borla S-Type 11855 with NPP Exhaust is designed for the 2017-2019 Chevrolet Corvette (C7) Grand Sport with a 6.2L V8 engine with a Automatic Transmission with AFM With NPP Dual Mode Exhaust.  

**This Axle-Back system if for cars equipped both AFM and NPP Valves excluding the Grand Sport With Manual Transmission.

With over 40 years of experience, Borla is very good at making high-quality exhaust systems and Corvette is a model that they specialize in. Best of all, BORLA exhaust systems are certified street legal in 50 states and will not violate factory or dealership warranties. This S-Type system delivers an exhaust note that's aggressive, but not the loudest of the Borla lineup.

The C7 Corvette Grand Sport Borla Exhaust System will deliver the expected performance gains of all Borla kits and is manufactured using 2.75 stainless steel mandrel bent tubing that will allow for a smooth exhaust flow, creating improved horsepower and torque. Each muffler provides a single 2.75 inch inlet and dual 2.0-inch exit before the added 4.25-inch Dual Round Rolled Angle-Cut Intercooled Tips that creates the Quad Center Rear Exit classic look. Intercooled tips are made from 2 pieces of tube. The inside is flared to meet the outside. There is a small gap between the tubes that acts as a buffer for heat. Think of it as a dual pane window. The inside tube gets all the exhaust heat and the outside stays about half the temperature.

Installation of the C7 Corvette Borla S-Type with NPP Exhaust is best left to the professionals. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your C7 Grand Sport Exhaust System.

Free Shipping

Product Note: Fits (2017, 2018 and 2019) Corvette Grand Sport with Factory NPP Dual Mode Exhaust and Automatic Transmission

Product Note: *The rear valence must be removed to complete the installation.

Product Note: Will not fit GS with a Manual Transmission

C7 Corvette Z06 Borla 11905

The Borla 11905 ATAK is the loudest in the C7 Corvette Z06 line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Z06 ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride. This Borla C7 Corvette Z06 Exhaust features the 4.25" Dual Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque. Installing this exhaust system on your Z06 will not trip a CEL Check Engine Light and does not require an aftermarket tune. All C7 Corvette Z06 ATAK Exhaust Systems come with a complete set of instructions and all the necessary hardware installation. 

Borla 11905 ATAK Exhaust System for the C7 Corvette Z06 are manufactured in Borla's modern manufacturing facilities in Johnson City Tennessee and Oxnard California. Each C7 Corvette Exhaust System is specifically designed and engineered for the needs of Chevy s flagship car. Borla uses only the highest grade T-304 Stainless Steel, which has much better corrosion and frequency response than the 409 SS used by some of it competitors. The Borla ATAK Z06 Exhaust System retains the factory NPP function, allowing you to adjust the volume of your ATAK system. By maintaining the NPP function on your Z06 Corvette, you can adjust this exhaust from a quite highway touring mode to wide open deep aggressive tone with the flick of a switch. For added volume and a deeper tone, add a X-Pipe to your ATAK.

Free Shipping

Product Note: Fits (2015 - 2016 - 2017 - 2018 - 2019) Corvette Z06 with Factory NPP Exhaust Option Only

C7 Corvette Grand Sport Borla 11905

The Borla 11905 ATAK is the loudest of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Grand Sport ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride. This Borla C7 Corvette Grand Sport Exhaust features the 4.25" Dual Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque. Installing the Borla ATAK will not cause a CEL Check Engine Light and does not require a tune. For added volume and improved flow, add a Borla X-Pipe. When it comes to proven performance, research, design Borla leads the way.

 The Borla 11905 ATAK is the most popular offering in the C7 Corvette Line Up. This C7 Corvette Grand sport Borla ATAK Axle Back Exhaust Systems allows Corvettes with the factory installed NPP adjustable exhaust to keep the functionality and adjustability of their exhaust volume. Transform your Grand Sport from quite touring mode to the fully open exhaust mode with a flip of a switch. All Borla Exhaust Systems are manufactured in their state of the art facilities in Southern California and Tennessee and are constructed with Aircraft Grade Light Weight T304 Stainless Steel and are backed by Borla's famous Million Mile Warranty. Each C7 Corvette GS Borla ATAK comes with a full set of instructions and all necessary hardware for installation. We strongly recommend that you have your new Borla ATAK professionally installed.

Free Shipping

Product Note: Fits (2017, 2018 and 2019)  C7 Corvette Grand Sport with Factory NPP Exhaust Option Only

Borla ATAK 11903CB Axle Back Exhaust - C7 Corvette Z06

The 11903CB Borla ATAK with Black Ceramic Tips is the loudest of the Borla C7 Corvette Z06 line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Grand Sport ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride. This Borla C7 Corvette Z06 Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips with Black Ceramic Coating and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2015 - 2019) Corvette Z06 with Factory NPP Exhaust Option Only

C7 Corvette Grand Sport Borla ATAK 11903CB Axle Back Exhaust 

If you’re looking for an exhaust system with astounding sound, amazing performance, and incredible looks, only the Borla ATAK exhaust system can deliver. The Borla sound of power known to all performance purists is made significantly louder and more aggressive in this new line up that will make your Chevy C7 Grand Sport standout from the crowd. With Borla’s patented Acoustically Tuned Applied Kinetics (ATAK) technology, this exhaust system offers the highest quality of sound at the highest decibel (dB) levels. Unlike others that lose sound quality at higher volumes, you can hear the loud sound of power with the C7 Corvette Borla Atak system.

C7 Corvette Axle Back Exhaust is made with its high grade T304 aircraft grade stainless steel that can resist corrosion and rust for the entire life of your vehicle. It has CNC machined mandrel bent tubes with optimized and consistent diameters to allow massive air flow and speed up exhaust gas velocity to gain more horsepower and improve fuel economy. The Borla 11903CB NPP Exhaust for the Chevy C7 Corvette is dyno-tested to add up to 15% horsepower and torque. This high-performance exhaust system uses the Borla muffler, the highest flowing muffler in the market today. It uses the straight-through and multi-core design that diminishes back pressure and absorbs sound waves better than chambered mufflers. The C7 Corvette Borla Atak exhaust kit exits in black ceramic coated 4.25 in. dual round rolled angle cut intercooled tips that will add more character to your ride. Borla part number 11903CB is custom designed for your Chevy C7 Corvette to guarantee a perfect fit.

Borla 11903CB NPP Exhaust is supplied with all necessary hardware and detailed instructions for a complete installation. Designed as a complete bolt-on using factory mounting locations, no drilling, welding, or any modifications required. All Borla ATAK Series exhaust system are manufactured in the USA and covered by a million-mile warranty.

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport Manual with Factory NPP Exhaust Option Only

Product Note: Will NOT fit Grand Sport with Automatic Transmission.

Borla 11903 - C7 Corvette Z06 ATAK

The 11903 Borla ATAK is the loudest of the Borla C7 Corvette Z06 line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Z06 ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride. This Borla C7 Corvette Z06 Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2015 - 2019) Corvette Z06 with Factory NPP Exhaust Option Only

C7 Corvette Grand Sport Borla 11903

The Borla 11903 ATAK is the loudest of the C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride. This Borla C7 Corvette Grand Sport Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque. Each systems comes with everything you will need for installation, including new clamps and a full set of instructions. The 11903 is specifically for the C7 Grand Sport with a Manual Transmission and allow you to retain complete control of your NPP Valves. (Click here for the Automatic Transmission version is the 11856)

The Borla 11903 Atak (Acoustically Tuned Applied Kinetics) allow this system to have a Deep Muscle Car sound at idle and cruising speed and a very aggressive volume increase as you press further down on the gas pedal and the RPM's rise. The ATAK technology is based on tuned attributes of the muffler internals specific for the C7 Corvette Grand Sport. The development of each system begins with an extensive study of each cars internal and external acoustics. The internal muffler cores are then tuned to match each specific vehicle. With this technology, the Borla ATAK is a perfect match for Grand Sport Corvettes with the Factory Installed NPP Option. 

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport Manual with Factory NPP Exhaust Option Only

Product Note: Will NOT fit Grand Sport with Automatic Transmission 

C7 Corvette Stingray Borla 11881

The 11881 Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust is for use on C7 Corvettes with Standard Type Exhaust (Not NPP Valved Exhaust).  This Borla C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Eliminates the AMF Valves

Borla ATAK 11875 - C7 Corvette Stingray

The 11875 Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride.  This Borla C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory NPP Exhaust Option Only

C7 Corvette Stingray Borla Exhaust with Black Tips

C7 Corvette Borla ATAK 11869CB with Standard Exhaust is the place to be if you are looking to upgrade your 2014-2019 Chevrolet Corvette with an aggressive sound made specifically for models that have AFM and NPP disabled and or are NOT equipped with AFM and NPP functionality. Note * A Check Engine Light will occur on vehicles equipped with AFM.

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust and the C7 Corvette Stingray Borla Exhaust system with Black Tips meets all the required specifications. Borla is a company that proudly supports Made in the USA and maximizes patented straight-through multi-core technology to unleash hidden horsepower in your Corvette.

Ultra-smooth CNC manufactured mandrel bends ensure a massive amount of air flow and with that an increase in torque and horsepower due to the precision computer-controlled CNC manufacturing process. Choosing to do so ensures an accurate fit to go along with the distinctive BORLA® Sound of Power respected by Corvette enthusiasts through out the world. 

Each muffler has a 2.75 inlet and dual 2 inch outlet that end with a total of four Intercooled Ceramic Black 4.25 inch tips that are dual rolled and angle cut for an impressive appearance. All four combine to create a Quad Center Rear Exit on the back of your C7 Corvette Stingray.

Borla Performance Industries recommends professional installation from a qualified installer who has all the necessary equipment, tools and experience ensuring proper installation. In the end your C7 Corvette Stingray Borla Exhaust with Black Tips will thank you while giving you the look you are after combined with the Aggressive sound Borla ATAK systems are well known for within the industry.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Eliminates the AMF Valves

C7 Corvette Grand Sport Borla Exhaust with Black Tips

C7 Corvette Borla ATAK 11869CB with Standard Exhaust is the place to be if you are looking to upgrade your 2014-2019 Chevrolet Corvette with an aggressive sound made specifically for models that have AFM and NPP disabled and or are NOT equipped with AFM and NPP functionality. Note * A Check Engine Light will occur on vehicles equipped with AFM.

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust and the C7 Corvette Grand Sport Borla Exhaust system with Black Tips meets all the required specifications. Borla is a company that proudly supports Made in the USA and maximizes patented straight-through multi-core technology to unleash hidden horsepower in your Corvette.

Ultra-smooth CNC manufactured mandrel bends ensure a massive amount of air flow and with that an increase in torque and horsepower due to the precision computer-controlled CNC manufacturing process. Choosing to do so ensures an accurate fit to go along with the distinctive BORLA® Sound of Power respected by Corvette enthusiasts through out the world. 

Each muffler has a 2.75 inlet and dual 2 inch outlet that end with a total of four Intercooled Ceramic Black 4.25 inch tips that are dual rolled and angle cut for an impressive appearance. All four combine to create a Quad Center Rear Exit on the back of your C7 Corvette Grand Sport.

Borla Performance Industries recommends professional installation from a qualified installer who has all the necessary equipment, tools and experience ensuring proper installation. In the end your C7 Corvette Grand Sport Borla Exhaust with Black Tips will thank you while giving you the look you are after combined with the Aggressive sound Borla ATAK systems are well known for within the industry.

Free Shipping

Product Note: Fits (2017, 2018 and 2019) Corvette Grand Sport with Factory Standard Exhaust Option Only

Product Note: Eliminates the AMF Valves

C7 Corvette Stingray Borla 11863CB with Black Tips

The 11863CB Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust is for use on C7 Corvettes with Standard Type Exhaust (Not NPP Valved Exhaust).  This Borla C7 Corvette Exhaust features the 4.25" Black Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque. C7 Corvette Borla ATAK 11863CB

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Retains the AMF Valves

C7 Corvette Stingray 11863 Borla Exhaust System 

The 11863 Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust is for use on C7 Corvettes with Standard Type Exhaust (Not NPP Valved Exhaust).  This Borla C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque. C7 Corvette Borla ATAK 11863

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory Standard Exhaust Option Only

Product Note: Retains the AMF Valves

C7 Corvette Stingray Borla Atak Exhaust 11856CB

You already have the car that looks amazing and handles the best, and now you want it to sound like it too. You need Borla’s sound of power. All enthusiasts know that Borla exhaust tones are the ultimate soundtrack of high-performance driving. With their loudest and most aggressive line up called the ATAK Series, you will be hearing an incredible concert of steel, gears, and combustion whenever you hit the gas. Install a new C7 Corvette Borla Atak exhaust system and its guaranteed, your ride will never sound better.

 The powerful sound of the Borla Atak Axle-Back Exhaust System throughout the RPM range comes from the patented Acoustically Tuned Applied Kinetics (ATAK) technology. It acts as a graphic equalizer that tunes exhaust sound to be of the highest quality at the highest available decibel levels. C7 Corvette Stingray Borla Atak Exhaust will also add more power after being dyno-tested up to additional 15% horsepower and torque. It is built to offer outrageous strength with the aircraft grade T304 stainless steel construction that endures rust and corrosion throughout the life for your car. The C7 Corvette Borla Atak exhaust kit features a muffler with a straight-through, multi-core design that diminishes back pressure to increase horsepower gains while absorbing sound waves. The mandrel bent tubes with optimized diameters reduce restriction and allows for improved gas flow and faster gas velocity. Borla 11856CB has oversized 4.25 in. dual rolled angle cut intercooled tips with black ceramic finish for the look of perfection.

 C7 Corvette Stingray Borla Atak Exhaust system is CNC machined to guarantee a perfect fit. Each kit is supplied with all the necessary clamps, hardware, and connectors and uses your vehicle’s existing mounting locations. Borla 11856CB installs easily using common tools, no drilling and modifications required. All Borla products are proudly designed, engineered, and manufactured in the USA. Your new ATAK series exhaust system is backed by Borla’s million-mile warranty.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Stingray with Factory NPP Exhaust Option Only

C7 Corvette Grand Sport Borla ATAK Axle Back Exhaust System 11856CB

The 11856CB Borla ATAK with Black Tips is the loudest of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride.  This Borla C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2014 - 2019) Corvette Automatic with Factory NPP/AMF Exhaust Option Only

Product Note: Will NOT fit Grand Sport with Manual Transmission

C7 Corvette Stingray Borla 11856 ATAK

The 11856 Borla ATAK is the loudest of the Borla C7 Corvette Stingray line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride.  This C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque. The 11856 is specifically designed for the C7 Corvette Stingray with both the Automatic and Manual transmissions. Each system comes with everything you need for a worry free installation, including a full set of instructions.

Proudly manufactured in the Untied States of America, Borla has taken the lead in innovative sound management and tuned exhaust systems. The Acoustically Tuned Applied Kinetics (ATAK) give Borla a unique advantage over their competitors. Each car is acoustically measured inside and out and then the mufflers cores are specifically tuned across the sound spectrum, giving you a clarity of sound not seen in other exhaust system. The Borla 11856 allow you to maintain complete control of your factory NPP Valves, making this one of the most versatile exhaust systems on the market today. Keep it quite when you want a conversational level of sound, and then let it roar when you put your foot down. No matter if you drive an Automatic or Manual, the Borla 11856 is the perfect match for your Stingray Corvette. 

Free Shipping

Product Note: Fits (2014 -2015 - 2016 - 2017 - 2018 - 2019) Corvette Stingray with Factory NPP Exhaust Option Only

Product Note: Fits Automatic and Manual

C7 Corvette Grand Sport Borla ATAK Axle Back Exhaust System 11856

The 11856 Borla ATAK is the loudest of the Borla C7 Corvette Grand Sport line up. It delivers a deep and aggressive sound through out the entire RPM range. The Borla Stingray ATAK axle back exhaust uses twin valves to allow for full exhaust sound or it can be muted to allow for a quieter ride.  This Borla C7 Corvette Exhaust features the 4.25" Dual Round Rolled Angle Cut Intercooled Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2017 - 2019) Corvette Grand Sport Automatic with Factory NPP Exhaust Option Only

Product Note: Will NOT fit Grand Sport with Manual Transmission

C6 Corvette Borla X-Pipe 60089

60089 Borla X-Pipe for the C6 Corvette (2005 - 2008) Borla center section X-Pipe for the 2005 to 2008 C6 Corvette LS2

Product Note: Fits (2005 - 2008) Corvette Automatic and Manual

C6 Corvette Borla Touring 11814

The 11814 Borla Touring is the quietest of the Borla C6 Corvette Exhaust line up. It delivers a deep and aggressive sound and is just about the same volume as the OEM exhaust. The Touring Exhaust features Borla's Multi Core Technology to reduce drone, and is a popular application for Corvettes with Long Tube Headers. The Borla C6 Corvette 6.0L LS2 Touring axle back exhaust is for use on C6 Corvettes with Automatic and Manual Transmissions. This Borla C6 Corvette Exhaust features the 4.00" Dual Round Rolled Angle Cut Tips and has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2005 - 2008) Corvette with 6.0L LS2 Engines

C6 Corvette Exhaust System - Borla 140452 Borla S-Type II

The 140452 Borla S-Type II Cat Back Exhaust is the Middle of the Borla C6 Corvette Exhaust line up. It delivers a deep and aggressive sound under acceleration and quiets down during cruising. The S-Type II is slightly more aggressive than the S-Type Classic and features Borla's Multi Core Technology to reduce drone.The Borla C6 Corvette 6.0L LS2 S-Type II cat back exhaust is for use on C6 Corvettes with Automatic and Manual Transmissions. This Borla C6 Corvette Exhaust features the 4.00" Dual Round Rolled Angle Cut Tips and a full center section X-Pipe that has been Dyno Tested to increase both Horsepower and Torque.

Free Shipping

Product Note: Fits (2005 - 2008) Corvette with 6.0L LS2 Engines

11917 Borla Exhaust System - C6 Corvette Z06

The 11917 Borla S-Type II is the middle of the Borla C6 Corvette Z06  and ZR1 Exhaust in the line up. It delivers a deep and aggressive sound under acceleration but quiets down at cruise. The Borla C6 Corvette 6.2L 7.0L LS7 and LS9 S-Type Classic axle back exhaust is a little more aggressive than the S-Type Classic and is for use on C6 Corvette Z06 and ZR1 with Manual Transmissions. This Borla C6 Corvette Z06 Exhaust features the 4.25" Dual Round Rolled Angle Cut Inter-cooled Tips and has been Dyno Tested to increase both Horsepower and Torque. Installation can be done with basic hand tools and requires moderate mechanical skills and access to a lift. Installing the Borla Stinger on your C6 Corvette Z06 does not require a tune and will not trip a CEL Check Engine Light.

Borlas production staff have relied on decades of design and engineering experience to formulate the best exhaust system for the C6 Corvette Z06. Borla uses aircraft grade stainless steel and state of the art mandrel bending machines to achieve the highest plow rates possible. Their patented straight through and multi chamber design not only improve performance, while at the same time reducing annoying harmonic drone. The C6 Corvette Z06 Borla S-Type is a straight bolt up application that does not require permanent modification to your Corvette. Each Borla S-Type Exhaust System comes with everything you need for installation, including Instructions, Clamps and all necessary hardware. This Borla Stinger II Exhaust system is quitter than the traditional Borla Stinger, making this the perfect exhaust system for the C6 Corvette Z06 with Long Tube Headers.

Free Shipping

Product Note: Fits (2006 - 2013) Corvette Z06 and Corvette ZR1 with 6.2L and 7.0L Engines