C6 Corvette Parts and Accessories

C6 Corvette Spark Plug Wires

C6 Corvette Kooks Spark Plug Wires. Get the added protection you need with Long Tube Header with a set of Kooks Spark Plug Wires. Featuring high conductivity 11mm Wires (8 pc. Set) with Grey with Black Boots. 2005 -2013 6.0L/6.2L/7.0L V8 Engines with Coil Packs in OEM location. 11mm High temp Silicone insulation help these wires withstand the extra heat of High Performance builds. High Temp Silicone boots are angled 90 degrees at the coil pack end, and 45 degrees at the Spark Plug end to maximize clearance to headers. Trusted by just about every major racing organization on the planet, Kooks C6 Corvette Spark Plug wires are up to the test. (Add Heat Shield Boots)

Fitment: C6 Corvette Base, Grand Sport and Z06. LS2 - LS3 - LS7 - (2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 and 2013)

Fitment: Fits applications with Stock Coil Pack Location

C6 Corvette Kooks 2 inch Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 2" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features massive 2" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H631 and 2160H632

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-7/8 Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 1-7/8" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H432 and 2160H431

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-3/4 Long Tube Headers with Green Cats

C6 Corvette Kooks Headers 1-3/4" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-3/4" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C6 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H231 and 2160H232

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 2 inch Long Tube Headers

C6 Corvette Kooks Headers 2" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features massive 2 inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H622 and 2160H621

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-7/8 Long Tube Headers

C6 Corvette Kooks Headers 1-7/8" with High Flow Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-7/8" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H421 and 2160H422

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C6 Corvette Kooks 1-3/4 Long Tube Headers

C6 Corvette Kooks Headers 1-3/4" with Green Cats - Street. Manufactured with High Grade T304 Aircraft Quality Stainless Steel and Mandrel Bent for maximum performance. This C6 Corvette Long Tube Header System from Kooks features 1-3/4" inch primaries which dump into massive 3 inch race style collectors for peak Horsepower and Torque gains. All Kooks C6 Corvette Headers are machine TIG Welded using state of the art robots for a perfect balance un-restricted air flow.

Included in this C6 Corvette Kooks Long Tube Header Set is a X-Pipe with Kooks High Flow Catalytic Converters. This Header Set includes Emission Fittings and is intended for street use where allowed by law. The X-Pipe with High Flow Cats is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section. 

Included with your Kooks Long Tube Header System is a new set of Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Installing a set of Long Tube Headers will require an aftermarket tune

Kooks Headers and Exhaust has been a leader in aftermarket Corvette exhaust systems for over 50 years. All their products are backed by a limited lifetime warranty. Kooks 2160H221 and 2160H222

Free Shipping

Fitment: C6 Corvette Base and Grand Sport. LS2 and LS3 - (2005 - 2013)

Product Note: Street Headers are manufactured WITH Emissions Bungs

Kooks 21606700 C6 Corvette 3" Exhaust System

C6 Corvette Z06 - Kooks Axle Back Exhaust - 3.0 Inch.  Complete the Exhaust on your C6 Corvette Z06 or ZR1 with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 3.0" Axle Back will mate directly to your Factory exhaust flanges or Kooks Long Tube Headers and X-Pipe. 21606700

Free Shipping

Fitment: C6 Corvette Z06 and ZR1 (2006 - 2013)

Product Note: Please allow 5 - 8 Business Days for manufacturing

Kooks 21606300 - C6 Corvette Exhaust System

C6 Corvette - Kooks Axle Back Exhaust - 2.5 Inch.  Complete the Exhaust on your C6 Corvette with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 2.5" Axle Back will mate directly to your Factory exhaust flanges or Kooks Long Tube Headers and X-Pipe. 21606300 - 21606100

Free Shipping

Fitment: C6 Corvette Base and Grand Sport (2005 - 2013)

Product Note: Please allow 5 - 8 Business Days for manufacturing