C5 Corvette Parts and Accessories

C5 Corvette Spark Plug Wires

C5 Corvette Kooks Spark Plug Wires. Get the added protection you need with Long Tube Header with a set of Kooks Spark Plug Wires. Featuring high conductivity 11mm Wires (8 pc. Set) with Grey with Black Boots. 1997 - 2004 LS1 and LS6 V8 Engines with Coil Packs in OEM location. 11mm High temp Silicone insulation help these wires withstand the extra heat of High Performance builds. High Temp Silicone boots are angled 90 degrees at the coil pack end, and 45 degrees at the Spark Plug end to maximize clearance to headers. Trusted by just about every major racing organization on the planet, Kooks C5 Corvette Spark Plug wires are up to the test. (Add Spark Plug Heat Shield Boots)

Fitment: C5 Corvette Coupe, Convertible FRC and Z06 (1997, 1998, 1999, 200, 2001, 2002, 2003 and 2004)

Fitment: Fits applications with Stock Coil Pack Location

C5 Corvette Kooks 2 inch Long Tube Headers with Green Cats - 2150H630

C5 Corvette Kooks Headers 2" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features Massive 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H630

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-7/8 Long Tube Headers with Green Cats

C5 Corvette Kooks Headers 1-7/8" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-7/8" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H430 / 2152H430

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-3/4 Long Tube Headers with Green Cats

C5 Corvette Kooks Headers 1-3/4" with High Flow Green Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Performance Green Cats. Green Cats are perfect for C5 Corvettes with high horsepower applications, like Turbo Charging, Supercharging or big CAM builds. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H230 / 2152H230

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-7/8 Long Tube Headers

C5 Corvette Kooks Headers 1-7/8" with High Flow Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-7/8" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2152H420 / 2151H420

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette Kooks 1-3/4 Long Tube Headers

C5 Corvette Kooks Headers 1-3/4" with High Flow Cats - Street. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set has Emission Fittings and is intended for street use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2151H220 / 2152H220

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Street Headers are manufactured WITH Emissions Bungs

C5 Corvette 2150H620 Kooks 2 inch Long Tube Headers 

C5 Corvette Kooks Headers 2" with High Flow Cats - Race. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 2 inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks 2" Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set has Emission Fittings and is intended for off road use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H620

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Race Headers are manufactured WITHOUT Emissions Bungs

C5 Corvette 2150H420 Kooks 1-7/8 Long Tube Headers - No Emissions

C5 Corvette Kooks Headers 1-7/8" with High Flow Cats - Race. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-7/8" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks 1-7/8 Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set DOES NOT HAVE Emission Fittings and is intended for off road use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H420

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Race Headers are manufactured WITHOUT Emissions Bungs

C5 Corvette 2150H220 Kooks 1-3/4 Long Tube Headers - No Emissions

C5 Corvette Kooks Headers 1-3/4" with High Flow Cats - Race. This Long Tube Header System from Kooks is manufactured with High Grade Stainless Steel and Mandrel Bent for maximum performance, and features 1-3/4" inch primaries. Each Header System dumps into massive 3 inch collectors for peak Horsepower and Torque gains. All Kooks C5 Corvette Headers are TIG Welded using state of the art robots for a perfect fit every time.

Included in this C5 Corvette Kooks Long Tube Header Set is a center section X-Pipe with High Flow Cats. This Header Set DOES NOT HAVE Emission Fittings and is intended for off road use where allowed by law. The X-Pipe is a full 3" and necks down to 2.5" to hook up to Factory (OEM)" Axle Back Muffler Section.

Each Kooks Long Tube Header System comes with New Gaskets, O2 Extensions, ARP Header Bolts and Torca Clamps. Bolt on a set of Kooks Headers on your C5 Corvette and let the fun begin. 2150H220

Kooks Headers and Exhaust has been a leader in aftermarket exhaust systems for over 50 years. They use only the finest T304 Air Craft Quality Stainless Steel, and all their products are backed by a limited lifetime warranty 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Race Headers are manufactured WITHOUT Emissions Bungs

Kooks 21506300 C5 Corvette 3" Exhaust System

C5 Corvette - Kooks Axle Back Exhaust - 3.0 Inch.  Complete the Exhaust on your C5 Corvette with this Axle Back Exhaust from Kooks. Manufactured with high grade 16 gauge Stainless Steel. and finished with 4 inch Polished Stainless Steel Tips. This 3.0" Axle Back will mate to aftermarket 3.0" Exhaust Systems ONLY or Kooks Long Tube Headers and X-Pipe. 21506300. 

Free Shipping

Fitment: C5 Corvette and Z06 (1997 - 2004)

Product Note: Please allow 5 - 8 Business Days for Manufacturing