{"title":"C5 Corvette Borla Exhaust Systems","description":"\u003ch2\u003eBorla Exhaust Systems for C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eGive your \u003cstrong\u003e1997–2004 C5 Corvette\u003c\/strong\u003e the Borla sound that suits the way you drive. Touring, S-Type Classic, S-Type II and ATAK rear exhaust systems offer different sound characters and tip layouts, while separate straight-pipe and X-pipe options let you choose how much of the exhaust to replace.\u003c\/p\u003e\n\u003cp\u003eStart with the sound you want from your LS1 or LS6, then compare the rear appearance and included components. A C5 used for long highway trips calls for a different balance than a car where maximum exhaust presence is the priority. Match the individual system to your model year and configuration before ordering, including the 2001–2004 Z06.\u003c\/p\u003e\n\u003ch3\u003eChoose Your C5 Borla Sound\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouring:\u003c\/strong\u003e The more restrained choice for owners who want to change the exhaust note without choosing the most aggressive option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS-Type Classic:\u003c\/strong\u003e Borla’s original S-Type design, available with several rear-tip layouts. It is a different muffler design from S-Type II and is excluded from Borla’s general No Drone guarantee.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eS-Type II:\u003c\/strong\u003e Uses a newer anti-resonance muffler design. Consider it when cabin resonance matters alongside a stronger exhaust note.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eATAK:\u003c\/strong\u003e The more aggressive muffled choice in this C5 selection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRear Exhaust, Straight Pipes or a Separate X-Pipe\u003c\/h3\u003e\n\u003cp\u003eThe rear exhaust assemblies replace the mufflers and outlets while connecting to the existing exhaust farther forward. They do not include an X-pipe. The 60087 merge X-pipe is a separate purchase for replacing the factory mid-pipe, and installation requires cutting the factory H-pipe.\u003c\/p\u003e\n\u003cp\u003eBorla 12649 is a muffler-delete rear section, not another ATAK system. Choose it specifically for a rear section without mufflers rather than expecting the sound control of Touring, S-Type or ATAK.\u003c\/p\u003e\n\u003ch3\u003eChoose the Rear-Tip Layout\u003c\/h3\u003e\n\u003cp\u003eThe C5 systems here use polished stainless tips. S-Type Classic 140017 has one large round Phantom-style outlet per side, while 140038 uses 4-inch round tips. S-Type Classic 140039, Touring 140426, S-Type II 140427 and ATAK 140428 use oval tips. The oval appearance alone does not identify the muffler design, so choose the sound family before the tip layout.\u003c\/p\u003e\n\u003ch3\u003eBefore Ordering for a Modified C5\u003c\/h3\u003e\n\u003cp\u003eIf your Corvette already has headers, an aftermarket mid-pipe or altered exhaust connections, compare those connections with the chosen kit. The correct year and trim are the starting point; existing exhaust changes also matter to installation.\u003c\/p\u003e\n\u003cp\u003eRead our \u003ca href=\"\/blogs\/news\/borla-corvette-exhaust-systems-guide-c5-c8\"\u003eBorla Corvette exhaust guide\u003c\/a\u003e for more on the sound families and system types, then browse the C5 systems below to choose your sound and rear-tip layout.\u003c\/p\u003e\n","products":[{"product_id":"c5-corvette-borla-atak-140428-exhaust-system","title":"C5 Corvette Borla ATAK 140428 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 140428 ATAK Axle-Back Rear Section with Oval Tips for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140428 ATAK exhaust system is the C5 rear-section option for owners who want Borla’s most aggressive sound profile in an axle-back configuration. This setup installs behind the factory mid-pipe (no mid-pipe or X-pipe included) and finishes the rear with 4.25\" x 3.5\" oval polished tips.\u003c\/p\u003e\n\u003ch3\u003eBorla 140428 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: ATAK\u003c\/li\u003e\n\u003cli\u003eTip shape\/size: 4.25\" x 3.5\" oval\u003c\/li\u003e\n\u003cli\u003eTip material\/finish: Polished T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eInstall position: Rear section behind the factory mid-pipe\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC5-specific rear section layout designed for clean alignment at the bumper exits\u003c\/li\u003e\n\u003cli\u003eATAK sound profile is engineered to be the most aggressive option in the Borla family\u003c\/li\u003e\n\u003cli\u003eStainless construction selected for long service life in real-world use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eATAK sound level for maximum volume and sharp exhaust character\u003c\/li\u003e\n\u003cli\u003eOval polished tips for a distinctive rear appearance compared with round-tip setups\u003c\/li\u003e\n\u003cli\u003eRear section swap that keeps the factory mid-pipe section in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a noticeably louder exhaust note than S-Type or Touring-level systems, especially under throttle. After a heat-cycle and a few drives, re-check clamp tightness and confirm tip clearance and alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eNo mid-pipe or X-pipe is included; this is the rear section only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want the ATAK sound level with C5-specific fitment and oval polished tips, the Borla 140428 is the right rear-section setup for an aggressive exhaust profile.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":25391508615,"sku":"140428","price":2097.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-atak-140428-exhaust-system-product_jpg.jpg?v=1770234532"},{"product_id":"c5-corvette-borla-straight-pipes-12649-exhaust-system","title":"C5 Corvette Borla Straight Pipes 12649 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 12649 Straight Pipe Rear Section with 4\" Polished Tips for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 12649 Straight Pipes exhaust system is a rear-section setup for 1997–2004 C5 Corvette owners who want a very aggressive exhaust note. This system uses straight pipe rear sections and does not include mufflers, and it finishes with 4\" round polished tips.\u003c\/p\u003e\n\u003ch3\u003eBorla 12649 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eConfiguration: Straight pipe rear sections; no mufflers\u003c\/li\u003e\n\u003cli\u003eTips: 4\" round polished T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes: LH\/RH over-axle sections, LH\/RH tail pipe sections, gaskets, and clamps\/hardware\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication-specific fitment and tip placement for the C5 platform\u003c\/li\u003e\n\u003cli\u003eStainless construction and OE-style mounting approach\u003c\/li\u003e\n\u003cli\u003eRear section design intended to install behind the factory mid-pipe section\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum exhaust volume potential due to no mufflers\u003c\/li\u003e\n\u003cli\u003eStraight-through rear section design with minimal sound attenuation\u003c\/li\u003e\n\u003cli\u003eSplit rear exit look with 4\" polished round tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a very loud, raw exhaust note because this system removes mufflers in the rear section. After a short heat-cycle and a few drives, re-check hardware tightness and confirm tip alignment and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eNo mid-pipe or X-pipe is included; this is the rear section only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want straight-pipe rear sections with 4\" polished tips and C5-specific fitment, the Borla 12649 is the right direction for a maximum-volume setup.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":32505195298893,"sku":"12649","price":888.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-straight-pipes-12649-exhaust-system-product_jpg.jpg?v=1770227863"},{"product_id":"c5-corvette-borla-s-type-classic-140017-exhaust-system","title":"C5 Corvette Borla S-Type Classic 140017 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 140017 S-Type Classic (Borla Stinger) with 4.5\" Phantom Tips for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140017 S-Type Classic—often called the \u003cstrong\u003eBorla Stinger\u003c\/strong\u003e—is the C5 option for owners who want the classic S-Type character paired with a bold \u003cstrong\u003e4.5\" Phantom-style round tip\u003c\/strong\u003e rear appearance. This axle-back rear section installs behind the factory mid-pipe (no mid-pipe or X-pipe included) and focuses on correct tip placement at the rear exits.\u003c\/p\u003e\n\u003ch3\u003eBorla 140017 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: S-Type Classic\u003c\/li\u003e\n\u003cli\u003eTip style: 4.5\" round Phantom-style polished tips\u003c\/li\u003e\n\u003cli\u003eTip material: Polished T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eInstall position: Rear section behind the factory mid-pipe\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC5-specific layout designed for correct fitment and rear exit alignment\u003c\/li\u003e\n\u003cli\u003eStainless components chosen for long service life in real-world use\u003c\/li\u003e\n\u003cli\u003eA well-known C5 “Stinger” configuration with broad community familiarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClassic S-Type sound profile for a deeper, more pronounced exhaust note\u003c\/li\u003e\n\u003cli\u003ePhantom-style 4.5\" tips for a clean, aggressive rear look\u003c\/li\u003e\n\u003cli\u003eRear section swap that keeps the factory mid-pipe section in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a stronger tone than a mild\/touring-style setup along with a noticeable visual change from the larger Phantom tips. After a heat-cycle and a few drives, re-check clamp tightness and confirm tip clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eNo mid-pipe or X-pipe is included; this is the rear section only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want the S-Type Classic (Borla Stinger) sound profile with 4.5\" Phantom-style tips and C5-specific fitment, the Borla 140017 is the right rear-section setup to finish the look.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":25393690183,"sku":"140017","price":1097.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-s-type-classic-140017-exhaust-system-product_jpg.jpg?v=1770232010"},{"product_id":"c5-corvette-borla-s-type-classic-140038-exhaust-system","title":"C5 Corvette Borla S-Type 140038 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 140038 S-Type Classic (Borla Stinger) with Quad 4\" Round Tips for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140038 S-Type Classic—commonly referred to in the Corvette community as the \u003cstrong\u003eBorla Stinger\u003c\/strong\u003e—is the C5 rear-section choice when you want the classic S-Type sound profile paired with a \u003cstrong\u003equad 4\" round tip\u003c\/strong\u003e rear appearance. This axle-back rear section installs behind the factory mid-pipe (no mid-pipe or X-pipe included) and focuses on correct fitment and tip placement at the rear exits.\u003c\/p\u003e\n\u003ch3\u003eBorla 140038 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: S-Type Classic\u003c\/li\u003e\n\u003cli\u003eTip layout: Quad 4\" round rear appearance\u003c\/li\u003e\n\u003cli\u003eTip material\/finish: 4\" round polished T-304 stainless steel tips\u003c\/li\u003e\n\u003cli\u003eInstall position: Rear section behind the factory mid-pipe\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC5-specific rear section layout intended for clean alignment at the bumper exits\u003c\/li\u003e\n\u003cli\u003eStainless tip construction designed for long service life\u003c\/li\u003e\n\u003cli\u003eWell-known “Stinger” style configuration with broad C5 community familiarity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eS-Type Classic sound profile for a deeper, more pronounced exhaust note\u003c\/li\u003e\n\u003cli\u003eQuad 4\" round tips for a balanced rear look compared with larger tip styles\u003c\/li\u003e\n\u003cli\u003eRear section swap that keeps the factory mid-pipe section in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a stronger tone than a mild\/touring-style setup, with the visual change driven by the quad 4\" round tips at the rear. After a heat-cycle and a few drives, re-check clamp tightness and confirm tip clearance and alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eNo mid-pipe or X-pipe is included; this is the rear section only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want the S-Type Classic (Borla Stinger) sound profile with a quad 4\" round tip rear appearance and C5-specific fitment, the Borla 140038 is the right rear-section setup to finish the look.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":33043339739213,"sku":"140038","price":1449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-s-type-classic-140038-exhaust-system-product_jpg.jpg?v=1770233236"},{"product_id":"c5-corvette-borla-s-type-classic-140039-exhaust-system","title":"C5 Corvette Borla S-Type Classic 140039 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 140039 S-Type Classic (Borla Stinger) for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140039 S-Type Classic exhaust system—commonly referred to in the Corvette community as the \u003cstrong\u003eBorla Stinger\u003c\/strong\u003e—is for 1997–2004 C5 Corvette owners who want a classic S-Type sound profile with a dual split rear exit look. This is an axle-back rear section that installs behind the factory mid-pipe (no mid-pipe or X-pipe included) and uses oval polished tips at the split rear exits.\u003c\/p\u003e\n\u003ch3\u003eBorla 140039 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: S-Type Classic\u003c\/li\u003e\n\u003cli\u003ePipe diameter: Single 2.5\" into mufflers, exiting dual 2\"\u003c\/li\u003e\n\u003cli\u003eTip exit: Dual split rear exit\u003c\/li\u003e\n\u003cli\u003eTips: 4.25\" x 3.5\" oval polished T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eT-304 austenitic stainless steel construction for long service life\u003c\/li\u003e\n\u003cli\u003eApplication-specific design focused on correct fitment and tip placement\u003c\/li\u003e\n\u003cli\u003eBacked by Borla’s million-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eS-Type Classic sound profile for a deeper, more pronounced tone than a mild setup\u003c\/li\u003e\n\u003cli\u003eSplit rear exit appearance with oval polished tips\u003c\/li\u003e\n\u003cli\u003eRear section layout that keeps the factory mid-pipe section in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a deeper, classic S-Type sound character and a clean split rear exit look. After a short heat-cycle and a few drives, re-check hardware tightness and confirm tip alignment and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eIf you want a crossover, a C5 X-pipe is a separate part (not included in this system)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want the S-Type Classic (Borla Stinger) sound profile with C5-specific fitment and oval polished tips at the split rear exits, the Borla 140039 is a solid rear-section choice.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":40042854318273,"sku":"140039","price":1399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-s-type-classic-140039-exhaust-system-product_jpg.jpg?v=1770229492"},{"product_id":"c5-corvette-borla-s-type-ii-140427-exhaust-system","title":"C5 Corvette Borla S-Type II 140427 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eBorla 140427 S-Type II Axle Back with Split Rear Exit Tips for the 1997–2004 C5 Corvette\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140427 S-Type II exhaust system is for 1997–2004 C5 Corvette owners who want a deeper, more pronounced tone than a Touring-style setup while keeping the car usable for regular driving. This axle-back rear section installs behind the factory mid-pipe (no mid-pipe or X-pipe included) and finishes with oval polished tips at the split rear exits.\u003c\/p\u003e\n\u003ch3\u003eBorla 140427 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: S-Type II\u003c\/li\u003e\n\u003cli\u003eInstallation location: Rear section behind the factory mid-pipe\u003c\/li\u003e\n\u003cli\u003eTips: 4.25\" x 3.5\" oval polished T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication-specific fitment and tip placement for the C5 platform\u003c\/li\u003e\n\u003cli\u003eStainless materials selected for long service life\u003c\/li\u003e\n\u003cli\u003eRear section design intended to align cleanly at the C5 split rear exits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eS-Type II sound profile for a stronger exhaust note than a mild setup\u003c\/li\u003e\n\u003cli\u003eSplit rear exit appearance with oval polished tips\u003c\/li\u003e\n\u003cli\u003eRear section layout that keeps the factory mid-pipe section in place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a deeper, more aggressive tone than a Touring-level system, with the same split rear exit look. After a short heat-cycle and a few drives, re-check hardware tightness and confirm tip alignment and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eNo mid-pipe or X-pipe is included; this is the rear section only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want an S-Type II sound profile with C5-specific fitment and oval polished tips at the split rear exits, the Borla 140427 is a solid rear-section choice.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":32706925232205,"sku":"140427","price":1847.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-s-type-ii-140427-exhaust-system-product_jpg.jpg?v=1770228827"},{"product_id":"c5-corvette-borla-touring-140426-exhaust-system","title":"C5 Corvette Borla Touring 140426 Exhaust System (1997-2004)","description":"\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/cca-free-shipping-performance-banner-v1_png.png?v=1784299920\" alt=\"Free shipping on Borla Corvette exhaust systems\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eTouring-Level Sound with Split Rear Exit and Quad Oval Tips for the C5\u003c\/h2\u003e\n\u003cp\u003eThe Borla 140426 Touring exhaust system is a fit-focused choice for C5 Corvette owners who want a deeper tone without moving into an aggressive sound level. This rear-section axle-back style system installs behind the factory mid-pipe (no X-pipe included) and delivers a dual split rear exit look with quad oval rolled, angle-cut tips.\u003c\/p\u003e\n\u003ch3\u003eBorla 140426 Product Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle: 1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/li\u003e\n\u003cli\u003eSystem type: Axle-Back (rear section)\u003c\/li\u003e\n\u003cli\u003eSound level: Touring\u003c\/li\u003e\n\u003cli\u003eTransmission: Manual and automatic\u003c\/li\u003e\n\u003cli\u003eTips: Quad 4.25\" x 3.5\" oval rolled, angle-cut tips\u003c\/li\u003e\n\u003cli\u003eNotes: No mid-pipe or X-pipe included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Borla Leads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication-specific fitment and tip placement for the C5 platform\u003c\/li\u003e\n\u003cli\u003eTouring sound profile designed for a refined, daily-drivable tone\u003c\/li\u003e\n\u003cli\u003eComponent layout intended to install cleanly behind the factory mid-pipe section\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDeeper exhaust note without stepping up to an aggressive sound level\u003c\/li\u003e\n\u003cli\u003eSplit rear exit appearance with quad oval rolled angle-cut tips\u003c\/li\u003e\n\u003cli\u003eDesigned to align correctly at the C5 rear bumper exits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat to Expect After Installation\u003c\/h3\u003e\n\u003cp\u003eExpect a deeper tone with a Touring sound profile and a clean split rear exit look. After a short heat-cycle and a few drives, re-check hardware tightness and confirm tip alignment and clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eCorvette Compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis fits the \u003cstrong\u003e1997–2004 Chevrolet Corvette C5 (5.7L V8)\u003c\/strong\u003e exactly.\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Base\u003c\/strong\u003e (Coupe and Convertible)\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Fixed Roof Coupe (FRC)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits \u003cstrong\u003eC5 Corvette Z06\u003c\/strong\u003e (FRC body style)\u003c\/li\u003e\n\u003cli\u003eManual and automatic transmissions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCross-Compatibility \u0026amp; Related Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not fit 1996 and earlier Corvette models\u003c\/li\u003e\n\u003cli\u003eDoes not fit 2005+ Corvette models (C6 and newer)\u003c\/li\u003e\n\u003cli\u003eIf you want a crossover, a C5 X-pipe is a separate part (not included in this system)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCustom Corvette Accessories is enthusiast-run, focused on correct fitment, fast nationwide shipping, and real-world Corvette ownership support.\u003c\/p\u003e\n\u003cp\u003eIf you want a refined Touring sound with a split rear exit look and quad oval tips, the Borla 140426 is a fitment-focused upgrade for the C5 platform.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":25395890247,"sku":"140426","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/files\/c5-corvette-borla-touring-140426-exhaust-system-full-kit_jpg.jpg?v=1770224641"},{"product_id":"c5-corvette-borla-x-pipe-60087-1997-2004","title":"C5 Corvette Borla X-Pipe 60087 (1997 - 2004)","description":"\u003ch2\u003eC5 Corvette Borla X-Pipe\u003c\/h2\u003e\n\u003cp\u003e60087 Borla X-Pipe for the C5 Corvette (1997 - 2004) Borla center section X-Pipe for the 1997 to 2004 C5 Corvette LS1\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003eProduct Note:\u003c\/span\u003e Fits (1997 - 2004) C5 Corvette Automatic, and Manual\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation note:\u003c\/strong\u003e Installation requires cutting the factory H-pipe.\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":25397345223,"sku":"60087","price":534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/products\/60087_C5_Corvette_Borla_X-Pipe_3bbc6c2c-c974-4231-a49c-96667dabf1b7.jpg?v=1519342476"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1359\/4413\/collections\/c5-corvette-borla-exhaust-systems.png?v=1792764259","url":"https:\/\/www.corvettepartsandaccessories.com\/collections\/c5-corvette-borla-exhaust-systems.oembed","provider":"Corvette Parts from Custom Corvette Accessories","version":"1.0","type":"link"}